Badger Basket 01906 - Manuals

Badger Basket 01906 – Manual in PDF format online.

Manuals:

Manual Badger Basket 01906

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - Phillips Screwdriver, Hammer; BEFORE YOU BEGIN ASSEMBLY:; Most problems are resolved without you needing to leave home.; READ ALL INSTRUCTIONS; Keep unassembled parts out of the reach of small children.; DO NOT; allow anyone to; Periodically check; to make sure all the screws remain; IS A TOY ONLY AND NOT FOR USE WITH REAL INFANTS OR PETS.; WARNING - FAILURE TO FOLLOW THESE

1.0/0309/TG TOOLS NEEDED: Phillips Screwdriver, Hammer PARTS INCLUDED: (A) 1 - Top Ring(B) 4 - Leg Posts(D) 15 - Dowels*(F) 1 - Bottom Ring(G) 4 - Caster Wheels(H) 1 - Canopy Pole with Curve/Bend Page 2 of 4 BEFORE YOU BEGIN ASSEMBLY: Check all parts and hardware. If anything is missing or not satis...

Page 3 - See PICTURE 1. Attach the FOUR LEG; PICTURE 1

1.0/0309/TG Page 3 of 4 PICTURE 3 PICTURE 2 STEP 1: See PICTURE 1. Attach the FOUR LEG POSTS (B) to their designated spots on the TOP RING(A) using the FOUR SCREWS (N). Attach the FOUR DOWELS WITH TWO HOLES (D)using FOUR SCREWS (N). The positions of thesefour dowels may vary from shown in Picture 1....

Page 4 - dried on low or no heat. Iron on the lowest setting for poly/cotton.

1.0/0309/TG STEP 4: See PICTURES 4A and 4B. Insert the CANOPY POLE (H) through the hole on the TOP RING (A) and push it down until it rests in the hole on the BOTTOM RING (F). Insert the two free ends of the METALCANOPY FRAME (I) into the top of the CANOPY POLE (H). You may need to gently tap on the...

Badger Basket Manuals