Badger Basket 00569 - Manual
Badger Basket 00569 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – BEFORE YOU BEGIN ASSEMBLY:; Contact us for assistance. Most problems are resolved without you
- Page 3 – be removed and reattached,; by an adult; PICTURE 1; ” symbol indicates that this step is
- Page 4 – PICTURE 5; Dress the FABRIC LINER (L) onto the WICKER; Not for children under three; PICTURE 6
1.0/0407/TG
PRODUCT MODEL
NUMBER:
00569
Visit us online at
www.badgerbasket.com
Toll-Free Customer Service: 1-800-236-1310 (Monday to Thursday 7:30 AM-4:30 PM CST)
Web:
http://www.badgerbasket.com/parts •
E-mail:
PLANT AND GENERAL OFFICE:
PO Box 227, Edgar, WI 54426-0227 • Phone: 715-352-2311 • Fax: 715-352-3163
CORPORATE OFFICE:
111 Lions Dr., Suite 220, Barrington, IL 60010
Page 1 of 4
WICKER DOLL BUGGY
Assembly Instructions. Adult Assembly
Required. Save these instructions for future
use. This item is a toy for dolls only.
For children ages (3) years and older.
Actual product may vary slightly from shown.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
1.0/0407/TG Page 2 of 4 PARTS AND HARDWARE: BEFORE YOU BEGIN ASSEMBLY: Check all parts and hardware listed. If anything is missing or you have questions, please DO NOT call the store or return the product to them. Contact us for assistance. Most problems are resolved without you needing to leave hom...
1.0/0407/TG STEP 1 - PICTURE 1: Attach the HANDLE (A) to the HANDLE FRAMES (B) using TWO SHORT SCREWS (C). ! - S TEP 2 - PICTURE 2: Decide if you want the handle attached in front of the carriage or behind it (it can be removed and reattached, by an adult , in the other position at any time). Attach...
1.0/0407/TG STEP 5 - PICTURE 5: Attach the FOUR WHEELS (K) to the AXLES (I). Squeeze the metal clip on the wheel to open it, slide the wheel onto the axle, and then release the clip so that it locks over the end of the axle. Gentlytug each wheel to make sure the clip has popped into place and locked...
