AudioSource AE6C - Manuals

After selecting the mounting location, mark the hole to be cut out. A template is provided in the speaker box. Locate and align the template, then mark with pencil on the ceiling surface. If you are unsure whether there are obstructions behind the ceiling surface where the speakers are to be mounted...

3 Tighten all four of the mounting screws in the same manner until the speaker is properly aligned and held tight to the ceiling surface. Painting the Speaker Two paint shields are included in each AE Series speaker package. Place the paint shield inside the frames to protect the speakers. You can n...

4 AE6C Specifications Woofer Tweeter Frequency Response Impedance Sensitivity Power Capacity Outer Dimension Cut Out Dimension Mounting depth 6.5” Carbon Filled Poly Cone w/Butyl Rubber Surround Pivoting 19mm Poly ferrofluid Cooled 50Hz to 20kHz 8 ohm 87dB, 2.83v @ 1m 10 to 100 Watts 9” (229mm) diam...