AudioSource EQ200 - Manual
AudioSource EQ200 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CAUTION; RISK OF ELECTRICAL SHOCK; IMPORTANT SAFETY INSTRUCTIONS; Two Year Limited Warranty
- Page 3 – A Few Words about Graphic Equalizers; Using the Controls
- Page 4 – VIDEO
OWNER’S MANUAL
EQ 200
AudioSource®
13970 SW 72nd Ave
Portland, OR 97223
503.914.4688
www.audiosource.net
EQ 200 Owner’s Manual
Congratulations on your purchase of the AudioSource® EQ 200.
Please take a few moments to read this entire manual, and be sure to
retain this document for future reference. Please read and observe all
safety instructions detailed on page 2.
NOTE: If any part of this product is damaged or missing, please call your
dealer or AudioSource® directly at 1.877.715.5439 or 503.914.4688.
Please read your warranty and retain your receipt and original carton
for possible future use.
For more information about AudioSource® electronics, speakers and
accessories please visit www.audiosource.net
EQ 200
Ten-Band Stereo Graphic Equalizer
FEATURES:
Ten Bands from 30 Hz to 16 kHz +/-12dB
Spectrum Analzyer Display
Tape 1 / Tape 2 play-record loops
Audio and Video inputs
Main Output
EQ Bypass
Front panel Right and Left Level controls
KICK DRUM
SNARE DRUM
CYMBALS
CHIMES
BASS GUITAR
LEAD GUITAR
FEMALE VOCAL
MALE VOCAL
SAXAPHONE
ORGAN
PIANO
STRING BASS
VIOLIN
CELLO
CLARINET
FLUTE
TRUMPET
500
16,000
2,000
250
120
30
60
8,000
4,000
1,000
Fundamental Note Harmonic or Overtone
The chart below will help you identify which sliders on the GRAPHIC EQUALIZER Section will
most affect the sound and balance of particular instruments by illustrating where they lie in the
overall sonic spectrum.
SPECIFICATIONS
Frequency Response: 10 Hz - 50 kHz +/- 1 dB
Harmonic Distortion:
0.03% of nominal output
Signal to Noise Ratio: -95 dB
Input Impedance:
100k ohms
Output Impedance:
600 ohms
Load Impedance:
10k ohms or more
Inputs:
Audio, Video,
Tape 1, Tape 2
Outputs:
Main, Tape 1, Tape 2
Control Center Points: 30 Hz, 60 Hz, 120 Hz,
250 Hz, 500 Hz, 1 kHz,
2 kHz, 4 kHz, 8 kHz, 16 kHz
Control Range:
+/- 12 dB
Dimensions:
(W x H x D)
16-1/2” x 3-1/2” x 11-1/4”
(419 x 89 x 286 mm)
Net Weight:
8 lbs. (3.63 kg)
Power Consumption:
14 Watts
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
EQ 200 OWNER’S MANUAL 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 2 CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL! IMPORTANT S...
EQ 200 OWNER’S MANUAL 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 3 A Few Words about Graphic Equalizers Thank you for choosing this AudioSource EQ 200 Graphic Equalizer. Used correctly, a Graphic Equalizer is a powerful tool for very detailed control over the sound of...
EQ 200 OWNER’S MANUAL 13970 SW 72nd Ave. Portland, OR 97223 • 503.914.4688 • www.audiosource.net 4 7. Level Controls Both left and right channels have a control marked “Level”. This controls the level, or volume of each channel. Usually, these controls can be set to their maximum position, but these...
