AudioSource 6.5" 2-Way In-Wall Speaker System - Manuals

After selection of the mounting location, mark the hole to be cut out. A template is provided in the speaker box. Locate and level the template, then mark with pencil on the wall surface. If you are unsure whether there are obstructions behind the wall surface where the speakers are to be mounted cu...

3 Tighten all six of the mounting screws in the same manner until the speaker is properly aligned and held tight to the wall surface. Caution: Do not over tighten! Painting the Speaker Two paint shields are included in each AS6s speaker package. Place the paint shield inside the frame to protect the...

4 AS6s Specifications WooferTweeterFrequency ResponseImpedanceSensitivityPower CapacityOuter DimensionCut Out DimensionMounting depth 6.5” Poly Cone with Butyl Rubber SurroundPivoting 25mm Ferro-Fluid Cooled Tweeter50Hz to 20kHz8 ohm87dB200 Watts Peak8.5” x 12“ (215.9mm x 304.8mm) 7.3” x 10.8 “ (185...