AudioSource 2 Channel Amplifier With Auto Switching Dual Inputs - Manuals

AudioSource 2 Channel Amplifier With Auto Switching Dual Inputs – Manual in PDF format online.

Manuals:

Manual AudioSource 2 Channel Amplifier With Auto Switching Dual Inputs

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - Connections on the Rear Panel; Line Input 1; source the user wants to have as a primary source.; Line Output 2

Connections on the Rear Panel Line Input 1 is used to connect a local source such as CD Player, Computer Sound Card, Television Audio Output or other line level source. Line Input 1 has “Priority” over Line Input 2 and will override Line Input 2 whenever signal is present at the inputs marked Line 1...

Page 3 - If any components of this system are missing or damaged; Application Setup One; as an audio source, assuming the television is still active.; Figure 3; Application Setup Two; Normally the television will be the audio source for the AMP100.

Stereo Setup In this configuration, the mono switch is set to stereo for stereo operation. Connect the line out jacks from a stereo preamplifier or source to the line in jacks of your Amp100. Next connect your speakers to the terminals marked SPKR A (observing proper polarity: see above). Connect a ...

Page 4 - Safety Instructions; USA; LIMITED WARRANTY; Please Read the Safety; AVIS

Safety Instructions 1) Warning To reduce the risk of fire or electric shock, do not expose this appliance to rain or moisture. 2) Caution To reduce the risk of electric shock, do not remove cover (or back); no user serviceable parts inside. Refer servicing to qualified service personnel. Caution To ...

AudioSource Manuals