AudioControl ACX-300.4 - Manuals

Page 2 - Quick Start Guide; Important Safety Instructions

2 Quick Start Guide ACX-300.4 Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordan...

Page 3 - Connection Panel; Features

3 1. Speaker Output – Connect these wires to your speakers using the included water resistant harness. Speaker wire may then be crimped or soldered onto the bare leads. Use a decent sized wire gauge as this baby is powerful! 2. Power Input Terminal +12V & Ground – Connect these wires to the +12V...

Page 5 - Control Panel

5 Control Panel Features 9. Input mode - If you have both front and rear input signals avail- able - either by speaker level or line level - set this adjustment to 4 Ch mode. If you only have 2 signal wires, then set this to 2 Ch and the signal received on inputs 1/2 will be distributed out to 1/2 a...

Page 6 - Quick Start

6 Quick Start Here are a few general steps to get your ACX-300.4 amplifier up and running: 1. Undo the +12V and Ground connections to the vehicle battery before making any connections to the amplifier. 2. Pick a mounting location that will provide access to the controls and connections, provide plen...

Page 7 - Power Connections

7 Quick Start Guide ACX-300.4 Power Connections In this example, the head unit has a +12V trigger output that is connected to the ACX-300.4 remote input terminal. When the head unit is turned on, it will turn on the ACX-300.4 amplifier.Alternatively, the GTO™ signal sense feature can be used to gent...

Page 9 - Cover Plate Removal

9 Cover Plate Removal The cover plate must be removed to gain access to the controls, and then sealed again to protect the controls against moisture and debris. Removal Procedure 1. Locate the top six hex screws that hold down the sealed top cover. 2. Use a 2.5mm hex wrench to remove the six screws....

Page 10 - Specifications; Warranty

ACX-300.4 Quick Start Guide PN 914-023-0 Rev A Specifications All specifications are measured at 14.4 VDC (standard automotive voltage). As technology advances, AudioControl reserves the right to continuously change our specifications, like our Pacific Northwest weather, although we are working on c...

AudioControl ACX-300.4 - Manuals

Manuals:

User Manual AudioControl ACX-300.4

Summary

AudioControl Car Amplifiers Manuals