AudioControl LC-6.1200 - User Manual

Page 2 - Quick Start Guide; Important Safety Instructions

2 Quick Start Guide Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with th...

Page 3 - Connection Panel; Features

3 1. Fuses 40A – Replace these fuses only with the exact same style and Ampere rating. Disconnect 12V power before changing or inspecting the fuses. 2. Power Input Terminal +12V – This screw terminal connects to the +12V battery binding post of the vehicle. Use quality insulated wire, 4 to 0 AWG. 3....

Page 4 - Control Panel

4 Quick Start Guide Control Panel Features 10 11 12 18 19 13 14 17 15 16 20 22 23 21 24 25 26 27 28 29 30 32 31 33 34

Page 7 - AccuBASS® and ACR-1 Notes

7 AccuBASS® and ACR-1 Notes AccuBASS®switches The AccuBASS switches 1/2, 3/4, and 5/6, allow you to add the AccuBASS circuit into any speaker-level output pair: 1/2, 3/4, and 5/6 respectively. So each output can have the AccuBASS active, and its effect controlled by the settings of the AccuBASS leve...

Page 8 - Quick Start

8 Quick Start Guide Quick Start Here are a few general steps to get your LC-6.1200 amplifier up and running: 1. Undo the +12V and Ground connections to the car battery before making any connections to the amplifier. 2. Pick a mounting location that will provide access to the controls and connections...

Page 9 - Power Connections

9 Power Connections In this example, the head unit has a +12V trigger output that is connected to the LC-6.1200’s remote input terminal. When the head unit is turned on, it will turn on the LC-6.1200 amplifier.Use 4 to 0 AWG insulated wire for the +12V and Ground connec- tions. In this example, the ...

Page 14 - ACR-1 Dash Control Installation; Top Lid Removal

14 Quick Start Guide ACR-1 Dash Control Installation The AudioControl ACR-1 dash control is a remote level for your LC-6.1200 amplifier. It may be mounted under the dash using its own enclosure, or through a custom hole in the dash. The knob should be within reach of the driver, and in a spot where ...

Page 15 - Specifications

15 Specifications All specifications are measured at 14.4 VDC (standard automotive voltage). As technology advances, AudioControl reserves the right to continuously change our specifica- tions, like our Pacific Northwest weather, although we are working on a surround-sound umbrella as well. LC-6.120...

Page 16 - Block Diagram

16 Quick Start Guide PN 915-014-0 Rev A Block Diagram Active Speaker Level Conversion 3-4 / 5-6 Bus Combine Variable LP/HP Crossover Gain + - - + Speaker Outputs Bridged Speaker Level Sub (5/6) Line Level Sub 5 6 Mono/ Stereo R (6) L (5) AccuBASS & ACR-1 5-6 Bus 3-4 Bus Wardrobe Narnia/Mountlake...

AudioControl LC-6.1200 - User Manual

Table of Contents:

Summary

Other AudioControl Car Amplifiers Models