AudioControl ACM-4.300 - Manuals

Page 2 - Quick Start Guide; Important Safety Instructions

2 Quick Start Guide Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water. 6. Clean only with a dry cloth. 7. Do not block any ventilation openings. Install in accordance with th...

Page 3 - Connection Panel; Features

3 1. Fuse 30A – Replace the fuse only with the exact same style and Ampere rating. Disconnect 12V power before changing or inspect- ing the fuse. 2. Power Input Terminal +12V – This screw terminal connects to the +12V battery binding post of the vehicle. Use quality insulated wiring of the recommend...

Page 5 - Control Panel

5 Control Panel Features 8 9 10 11 12 13 11 12 13 8. Power LED – If you have connected your battery power, vehicle ground, and turn-on lead (or GTO™ signal sensing) correctly, then this light should turn on to indicate the power is ON. 9. Protection LED – The ACM-4.300 amplifier has built in diagnos...

Page 7 - Quick Start

7 Quick Start Here are a few general steps to get your ACM-4.300 amplifier up and running: 1. Undo the +12V and Ground connections to the car battery before making any connections to the amplifier. 2. Pick a mounting location that will provide access to the controls and connections, provide plenty o...

Page 8 - Power Connections; Ground

8 Quick Start Guide Power Connections Ground Head Unit Remote Amplifier+12V Trigger +12V In this example, the head unit has a +12V trigger output that is connected to the ACM-4.300 remote input terminal. When the head unit is turned on, it will turn on the ACM-4.300 amplifier.Alternatively, the GTO™...

Page 11 - Cover Plate Removal

11 Cover Plate Removal The cover plate must be removed to gain access to the controls, and then put back on again to protect the controls from dust bunnies. Removal Procedure1. Locate the top four screws that hold the cover plate in place. 2. Use a philips screwdriver to remove the four screws. 3. K...

Page 12 - Specifications; Warranty

Quick Start Guide PN 914-019-0 Rev C Specifications All specifications are measured at 14.4 VDC (standard automotive voltage). As technology advances, AudioControl reserves the right to continuously change our specifications, like our Pacific Northwest weather, although we are working on changing th...

AudioControl ACM-4.300 - Manuals

Manuals:

User Manual AudioControl ACM-4.300

Summary

AudioControl Car Amplifiers Manuals