ATEN CS-72A - Manuals

ATEN CS-72A – Manual in PDF format online.

Manuals:

Manual

Manual ATEN CS-72A

Summary

Page 2 - Reorient or relocate the receiving antenna

Note: This equipment has been tested and found to complywith the limits for a Class B digital device, pursuant to Part15 of the FCC Rules. These limits are designed to providereasonable protection against harmful interference in aresidential installation. This equipment generates, uses andcan radiat...

Page 3 - Overview

Overview The CS-72A KVM (Keyboard, Video, Mouse), Switch is acontrol unit that allows the control of two computers from asingle console (keyboard, monitor, and mouse). With its customdesigned connectors, the CS-72A reduces the number of portsrequired for a 2 Port KVM switch from 9 (6 PS/2 and 3 HDB)...

Page 4 - Features; Compact Vertical-Standing Design

Features M Compact Vertical-Standing Design M Custom Connector Layout Requires Only 3 Ports - 2SPDB-15 Female Connectors for Connecting to theComputers - Plus A Single, Integrated, SPDB-15 MaleConnector For the Keyboard, Video, and Mouse Console M Easy to Install - No Software Required - Connecting ...

Page 5 - System Requirements; Console; A PS/2 style keyboard; Computers

System Requirements Console M A VGA, SVGA, or Multisync monitor capable of the highestresolution that you will be using on any computer in theinstallation M A PS/2 style keyboard M A PS/2 style mouse Computers The following equipment must be installed on each computerthat is to be connected to the s...

Page 6 - Cables; Note: 1. If your computer uses a standard AT style keyboard; not support serial mice.

Cables Only CS Custom cable sets specifically designed to work withthis switch may be used. One Console Connector Cable andtwo 1.2m KVM cable sets are provided with this package. KVMcable sets are also available in 1.8 and 3 m lengths. If youneed additional cables, contact your dealer. Note: 1. If y...

Page 7 - Components; Port Selection Switches

Components Front View: 1. Port Selection Switches M Press a switch to give the KVM focus to the systemattached to its corresponding port. M Pressing Buttons 1 and 2 simultaneously for 3 secondsstarts Auto Scan Mode (see p. 10). M While in Auto Scan Mode, pressing either button exitsAuto Scan Mode an...

Page 8 - The Console Adapter Cable plugs in here.; * The shape of the 15-pin CPU and Console port connectors

Rear / Bottom View 1. CPU Port Connectors* The KVM cables that connect the unit to the mouse,keyboard, and video ports on the computers you areconnecting up can plug into any available port. 2. Console Port Connector* The Console Adapter Cable plugs in here. * The shape of the 15-pin CPU and Console...

Page 9 - Installation; Note: If your computers use AT style connectors for the

Installation The CS-72A can either lay flat on the desktop or stand upright.To have it stand upright, unsnap its mounting stand from thebottom of the unit; turn it 90 o ; and snap it back into place. See the photo on the front page for an example. Refer to the diagram on p. 8 as you do the following...

Page 10 - The power adapter should be DC9V with the inside

Note: 1. In order to fit into the jack, the power adapter cable should have an L shaped plug. 2. The power adapter should be DC9V with the inside positive and the outside negative: - 8 - 1 2 3 4 2003-02-18

Page 11 - Operation; Manual Port Selection; Note: The asterisk or minus key must be released within one

Operation Controlling the computers in your CS-72A installation from asingle console could not be easier. Two port selection methodsthat provide instant access to the computers are available: M Manual Port Selection M Hotkey Port Selection Manual Port Selection With Manual Port Selection you simply ...

Page 12 - Note: While Auto Scan Mode is in effect, ordinary keyboard; Selected LED Display

Auto Scan Mode: The CS-72A’s Auto Scan feature automatically switchesbetween the two ports at regular 5 seconds intervals so thatyou can monitor the computer activity without having to take thetrouble of switching yourself. To invoke Auto Scan Mode holddown both Port Selection buttons for 3 seconds ...

Page 13 - Specifications

Specifications Function Specification CPU Ports 2 Port Selection Push Button Switches; Hotkeys Connectors CPU 2 x SPDB-15 F (Yellow) Console 1 x SPDB-15 M (Yellow) LEDs 2 Selected Port (Green) Emulation Keyboard PS/2 Mouse PS/2 Scan Interval 5 secs. Operating Temperature 0 - 50 o C Storage Temperatu...

Page 14 - Troubleshooting

Troubleshooting Symptom Cause Action Keyboard 1 and/orMouse 2 Not Responding Loose cables. Check all cable connections to makesure they are completely seated intheir sockets. Master View is in AutoScan Mode. Press either Port Selection switch orthe Spacebar to exit Auto Scan Mode. Keyboard needs to ...

Page 15 - Troubleshooting Notes:; Some Notebooks, notably the IBM Thinkpad and Toshiba

Troubleshooting Notes: 1. The unit is designed to work with AT and PS/2 keyboards. Older XT (84 key) and some older AT keyboards (those withthe function keys on the side), will not work. 2. Some Notebooks, notably the IBM Thinkpad and Toshiba Tecra, have trouble when their mouse and keyboard portsar...

Page 16 - Limited Warranty

Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY EXCEEDTHE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT,SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGESRESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITSDOCUMENTATION. The direct vendor makes no warranty or representation, expressed,...