ATEN CS-72A - Manual

System Requirements Console M A VGA, SVGA, or Multisync monitor capable of the highestresolution that you will be using on any computer in theinstallation M A PS/2 style keyboard M A PS/2 style mouse Computers The following equipment must be installed on each computerthat is to be connected to the s...

Cables Only CS Custom cable sets specifically designed to work withthis switch may be used. One Console Connector Cable andtwo 1.2m KVM cable sets are provided with this package. KVMcable sets are also available in 1.8 and 3 m lengths. If youneed additional cables, contact your dealer. Note: 1. If y...

Components Front View: 1. Port Selection Switches M Press a switch to give the KVM focus to the systemattached to its corresponding port. M Pressing Buttons 1 and 2 simultaneously for 3 secondsstarts Auto Scan Mode (see p. 10). M While in Auto Scan Mode, pressing either button exitsAuto Scan Mode an...

Rear / Bottom View 1. CPU Port Connectors* The KVM cables that connect the unit to the mouse,keyboard, and video ports on the computers you areconnecting up can plug into any available port. 2. Console Port Connector* The Console Adapter Cable plugs in here. * The shape of the 15-pin CPU and Console...

Installation The CS-72A can either lay flat on the desktop or stand upright.To have it stand upright, unsnap its mounting stand from thebottom of the unit; turn it 90 o ; and snap it back into place. See the photo on the front page for an example. Refer to the diagram on p. 8 as you do the following...

Note: 1. In order to fit into the jack, the power adapter cable should have an L shaped plug. 2. The power adapter should be DC9V with the inside positive and the outside negative: - 8 - 1 2 3 4 2003-02-18

Operation Controlling the computers in your CS-72A installation from asingle console could not be easier. Two port selection methodsthat provide instant access to the computers are available: M Manual Port Selection M Hotkey Port Selection Manual Port Selection With Manual Port Selection you simply ...

Auto Scan Mode: The CS-72A’s Auto Scan feature automatically switchesbetween the two ports at regular 5 seconds intervals so thatyou can monitor the computer activity without having to take thetrouble of switching yourself. To invoke Auto Scan Mode holddown both Port Selection buttons for 3 seconds ...

Specifications Function Specification CPU Ports 2 Port Selection Push Button Switches; Hotkeys Connectors CPU 2 x SPDB-15 F (Yellow) Console 1 x SPDB-15 M (Yellow) LEDs 2 Selected Port (Green) Emulation Keyboard PS/2 Mouse PS/2 Scan Interval 5 secs. Operating Temperature 0 - 50 o C Storage Temperatu...

Troubleshooting Symptom Cause Action Keyboard 1 and/orMouse 2 Not Responding Loose cables. Check all cable connections to makesure they are completely seated intheir sockets. Master View is in AutoScan Mode. Press either Port Selection switch orthe Spacebar to exit Auto Scan Mode. Keyboard needs to ...

Troubleshooting Notes: 1. The unit is designed to work with AT and PS/2 keyboards. Older XT (84 key) and some older AT keyboards (those withthe function keys on the side), will not work. 2. Some Notebooks, notably the IBM Thinkpad and Toshiba Tecra, have trouble when their mouse and keyboard portsar...

Limited Warranty IN NO EVENT SHALL THE DIRECT VENDOR’S LIABILITY EXCEEDTHE PRICE PAID FOR THE PRODUCT FROM DIRECT, INDIRECT,SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGESRESULTING FROM THE USE OF THE PRODUCT, DISK, OR ITSDOCUMENTATION. The direct vendor makes no warranty or representation, expressed,...