Ashly MX-406 - Manuals - manualsarea.com

Operator Manual – MX-406 Mixer Page - 3 All Rights Reserved Important Safety InstructionsConsignes de sécurité à lire attentivement 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. To reduce the risk of fire or electric shock, do not expose...

Page 4 - Introduction; NOTE; About Ashly

Page - 4 Operator Manual – MX-406 Mixer Copyright© 2007 – Ashly Audio Inc. Introduction Congratulations on your purchase of an Ashly MX-406 stereo mic/line mixer, a professional,studio quality solution to everday mixing needs. MX-406 features include: 6 channels of mic or line inputs mic input pad T...

Page 5 - MX-406 Connector Polarities; Unbalanced Connections and Grounding

Operator Manual – MX-406 Mixer Page - 5 All Rights Reserved MX-406 Mixer The MX-406 is a versatile rack-mountable mixer capable of supporting the followingapplications: Small Sound Reinforcement Meeting/Board Room or Church Location Recording or Broadcast Mixing Sub-mixing in a larger system These a...

Page 6 - Physical Description

Page - 6 Operator Manual – MX-406 Mixer Copyright© 2007 – Ashly Audio Inc. Physical Description The MX-406 is 2RU, and weighs 13 pounds. MX-406 Front Panel 1. Input Gain - This three position switch sets the operating level of the microphone and line inputpreamp. The corresponding switch values -20d...

Page 7 - Installation

Operator Manual – MX-406 Mixer Page - 7 All Rights Reserved MX-406 Rear Panel 1. Microphone Input - The MX-406 microphone input is an active balanced type with a nominalimpedance of 1200 ohms. Performance is bestwith a 200 ohm microphone. 2. Input Pad - The input pad is a 20dB attenuation switch on ...

Page 8 - Typical Applications; Small Sound Reinforcement System; Changing Factory Configurations; Changing the Aux Pre/Post Assignment

Page - 8 Operator Manual – MX-406 Mixer Copyright© 2007 – Ashly Audio Inc. Typical Applications The following information will help you make the most of your new mixer: Small Sound Reinforcement System The MX-406 can be used to mix typical sound sources that might be found in a church,small club, sc...

Page 9 - Troubleshooting; Situation; Dimensions

Operator Manual – MX-406 Mixer Page - 9 All Rights Reserved Troubleshooting Situation Action No Sound Check the AC power. Is the power switch on and illuminated? Check the level meters. If theyare operating, either the problem is between the mixer and the later components in thesystem. If there is n...

Page 10 - Specifications

Page - 10 Operator Manual – MX-406 Mixer Copyright© 2007 – Ashly Audio Inc. Specifications SPECIFICATION MX-406 DISTORTION THD at +4 dBu, 20Hz-20KHz <0.05% THD at +12dBu, 30Hz-10KHz <0.05% IMD (SMPTE) at +12dBu <0.05% HUM & NOISE (20Hz-20KHz at max preamp gain) Equivalent input hum and ...

Page 11 - Limited Warranty; Ship your product to:

Operator Manual – MX-406 Mixer Page - 11 All Rights Reserved Limited Warranty Warranty service for this unit will be provided by ASHLY AUDIO INC. in accordance withthe following warrant statement. ASHLY AUDIO INC. warrants to the owner of this product that this product and thecomponents thereof, wil...