AprilAire 70 - Manuals

AprilAire 70 – Manual in PDF format online.

Manuals:

1 Page 1
2 Page 2
3 Page 3
4 Page 4

Summary

Page 2 - STEP 1. CHOOSE A LOCATION TO MOUNT THE CONTROL; MOUNT CONTROL...; Figure 1 – Disassemble the Control; LIVING SPACE CONTROL INSTALLATION INSTRUCTIONS; STEP 2. DISASSEMBLE THE CONTROL; SPECIFICATIONS

STEP 1. CHOOSE A LOCATION TO MOUNT THE CONTROL The Model 70 Living Space Control contains its own sensors that override the Aprilaire CentralDehumidifier main control sensors when connected and enabled. Therefore, the control should belocated in an area (living room, master bedroom, etc.) where the ...

Page 3 - Figure 2; Route wires through square hole in; Figure 2 – Mount the Control; STEP 3. MOUNT THE CONTROL ON THE WALL; Secure the wires to the backing plate and main control; Figure 3; wiring; STEP 4. WIRE THE CONTROL; Figure 3 – Wire the Control

There are two mounting screws and two drywall anchors provided with the control. See Figure 2 . 1. Route wires through square hole in backing plate. Level backing plateagainst wall and mark two of themounting holes. 2. Drill two 3/16” diameter holes at the marked locations and install drywallanchors...

Page 4 - elapsed for system initialization.; STEP 5. REASSEMBLE THE CONTROL; Figure 4 – Integrated Sensor Control Board

SYSTEM SETUP ON OFF MODEL 70 MODEL 70 REMOVABLE SENSOR BOARD 10006367 8.09 B2203506D No tools required – snap the front cover back on the backing plate, being careful to align the 6-pinterminal block on the cover with the receptacle on the backing plate. 1. Turn the HVAC equipment back on to normal ...

AprilAire Manuals