American Standard CERATRONIC Proximity Faucet with Touch-Free Temperature Control - Manuals

4 ELECTRICAL 1 ELECTRICAL INSTALLATION 2 10 9 3 5 5 6 6 7 7 8 8 Fig. 1e Fig. 1d Fig. 1f 11 12 12 15 15 14 14 Fig. 1g Fig. 1h Fig. 1k 13 11 11 1 Fig. 1c 1. Remove ENCLOSURE COVER (1). Fig. 1. 2. Remove CIRCUIT BOARD (2) from ENCLOSURE (3) . (May have to pull cord of power supply through). Fig. 1. 3. ...

OPERATION When the Sensor detects a user, the water immediately starts to flow. Water flow will stop Two seconds after user is out of sensor range. The off delay allows the user to comfortably move his hands without the flow cycling on to off. As a precaution, a safety timer will turn off the water,...

MAINTENANCE Note: The factory setting of the Default Temperature is at a position of even amounts of hot and cold water flows. This setting can only be changed within the first 15 minutes of switching on the power. 1. Remove the power to the faucet by unplugging the Power Supply from the wall outlet...

7 1. Remove ENCLOSURE COVER. 2. Close SUPPLY STOPS. Note: Keep water flowing out of faucet while shutting off. 4. Unthread STRAINER (1) using a 7/16" socket. 5. Pull out the STRAINER (1) and clean with an old toothbrush. Rinse thoroughly with water. 6. Install the STRAINER (1) back in its place ...

605P400 605P800 9 C E R AT R O N I C L AVAT O R Y FA U C E T S CHROME 002 Replace the "YYY" with appropriate finish code HOT LINE FOR HELP For toll-free information and answers to your questions, call: 1 (800) 442-1902 Weekdays 8:00 a.m. to 8:00 p.m. EST IN CANADA 1-800-387-0369 (TORONTO 1-9...