American Standard 6065.122 - Manuals

American Standard 6065.122 – Manual in PDF format online.

Manuals:

Manual American Standard 6065.122

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
9 Page 9

Summary

Page 2 - UNPACKING; DO NOT REMOVE PROTECTIVE FILM FROM SENSOR; CLOTH WITH A COARSE SURFACE.

5. Sweat Solder Adapter 6. Cover Tube7. Wall Escutcheon8. Supply Stop9. Installation Instructions 1. Flush Valve Assembly2. Down Tube and Vacuum Breaker3. Spud Coupling Nut and Washers4. Spud Flange All American Standard Products Are Water Tested At Our Factory. Some Residual Water May Remain In The...

Page 3 - PRIOR TO INSTALLATION; Prior to installing the SelectronicTMFlush Valve; See Step 4; and debris can cause flush valve to run continuously.; Roughing-in Dimensions; Right or Left Hand Installation; Exposed Flushometer; See

RECOMMENDED TOOLS; Fig. 2 Fig. 2 1.2.3.4.5.6.7.8.9. 10. Teflon Tape Flat Blade ScrewdriverAdjustable Wrench Tape Measure HacksawTubing CutterFileFor Sweat Connection; Solder and Torch2.5mm Hex Wrench1.5mm Hex Wrench 1 2 3 4 5 6 7 9 10 8 PRIOR TO INSTALLATION Note: Prior to installing the Selectronic...

Page 4 - CAUTION; Install Optional Sweat Solder Adapter

1 1 2 3 4 5 1 4 2 3 Fig. 4 Fig. 5 1. Measure from finished wall to first thread of Adapter or threaded supply pipe (dimension “X”). Cut COVER TUBE (1) to length (X). Apply Teflon Tape to the threaded end of the Adapter or supply pipe. Fig. 4a. 2. Push the COVER TUBE (1) into the WALL ESCUTCHEON (2) ...

American Standard Manuals