American Standard 6059.193 - Manuals

M 9 6 5 2 7 1 Fig. 1e Fig. 1f 8 10 ELECTRICAL INSTALLATION 4 Fig. 1 Fig. 1b 1. Remove ENCLOSURE COVER (1) . Fig. 1. 2. Feed the WIRE CONNECTORS (2) through the top of ENCLOSURE (5) . Fig. 1a. 3. Remove GROMMET (4) from ENCLOSURE (5) . Fig. 1. 4. Feed the gray SENSOR WIRE (7) through GROMMET (4) , 4&...

TEST INSTALLED FAUCET 1. Setting the Detection Zone (Distance): Fig. 1. Detection Zone: 2" - 10" (50mm - 250mm) Default: Set at Factory 6" (150mm) Remove cover from ENCLOSURE. Disconnect GRAY SENSOR WIRE (1) from circuit board, then reconnect. Fig. 2. 2. While the SENSOR CONTROL LED (2) ...

CAUTION GENERAL CLEANING; Fig. 5 1. For general cleaning use a damp, soft cloth to clean the spout and the sensor. 2. For cleaning dirt use a soft cloth with diluted dish washing detergent. Wipe the area using a wet cloth and dry using a soft cloth. Do not scratch the sensor when cleaning. Avoid usi...