American Standard 2373.920 - Manuals

SPOUT BASERECESS Turn off hot and cold watersupplies before beginning. CAUTION 1 2 Assemble RUBBER WASHER (5) and LOCKNUT (6) onto SPOUTSHANK (1). Align SPOUT ASSEMBLY and from underside of ledgesecure SPOUT ASSEMBLY into position with LOCKNUT (6). SPOUT ASSEMBLY PREPARE TUBE AND TEE ASSEMBLY 3 1 4 ...

4 INSTALL HANDLES Push ADAPTER (1) on VALVE STEM (2), so that the hole of theADAPTER (1) without a spline is facing up. See figure "A". TightenSTEM SCREW (3) to secure ADAPTER (1). Find correct position of LEVER HANDLE ASSEMBLY (4) or CROSSHANDLE ASSEMBLY (5) by adjusting male teeth on ADAPT...

9 Before the bathroom is completely finished, you may want to remove spout, hand shower, and handles. To remove handles, reverse steps in section 4. To remove SPOUT (1), proceed as follows: Lift TRANSFER ROD (8) and unscrew KNOB (2). Remove PLUG BUTTON (3) and remove SET SCREW (4) using 5mm hexwrenc...