American Audio Q-MX2 BPM - Manuals

This is an effect used heavily by scratchers and performer DJ's. The mixer simulates this effect when you hold down the X and Y fader buttons. The speed of the transform is preset and will only effect any channel assigned to the fader assign button being depressed. 4. CHANNEL FADER - These faders ar...

22. AC VOLTAGE SELECTOR - Select between 115V/50Hz or 230V/60Hz. Make sure that the selector is set to the proper voltage you are using. 23. BALANCED XLR MAIN OUTPUTS - The Master Output includes a pair XLR Balanced Jacks as well as a pair RCA Unbalanced Jacks (30). The 3-pin XLR jacks send a high c...

Typical Balanced Output Set-up This image details a typical stereo output layout. Note the use of the Balanced XLR Jacks on both the mixer and the amplifi er. Always use the balanced output jacks whenever possible. The balanced output jacks should always be used for cable runs in excess of 10 feet. ...

© American DJ Supply ® - www.americandj.com - Q-MX2 BPM User Instructions page 12 The crossfader is "Hot Swappable" which means it may be replaced at any time, even when power is applied. Only replace with American Audio Part Feather Fader Plus. Replacing with any other model fader may serio...

Warranty & Service: The Q-MX2 BPM has a 2-year limited warranty. Please mail in warranty card as soon as possible to validate your warranty. For any service related issues please contact American DJ customer support at (800) 322-6337, Moday through friday 9:00 am to 5:00 pm Pacific Standard Time...