American Audio PRO DJ 3 - Manuals

Page 2 - This unit may cause interference to; • The desired voltage may be set with the; CAUTION: TO REDUCE THE RISK OF ELECTRIC; Handle the power supply cord carefully. Do not; CAUTION

American DJ ® AUDIO • PRO DJ3™ INSTRUCTION MANUAL • PAGE 2 NOTE: This unit may cause interference to radio and television reception. CAUTION TO PREVENT ELECTRIC SHOCK DO NOT USE THIS(POLARIZED) PLUG WITH AN EXTENSION CORD,RECEPTACLE OR OTHER OUTLET UNLESS THEBLADES CAN BE CAREFULLY INSERTED TO PREVE...

Page 3 - SAFETY INSTRUCTIONS

I. Read Instructions - All the safety and oper- ating instructions should be read before the CD Player is operated. 2. Save Instructions - The safety and operat- ing instructions should be saved for future reference. 3. Heed Warnings - All warnings on the CD Player and in the operating instructions ...

Page 4 - GENERAL NOTES ON USE; Figure 2; MAIN FEATURES

1. Checking the Contents Be sure your PRO DJ3 was shipped with the following: 1) Pro DJ3 Professional CD player. 2) Operating instructions (this booklet). 3) One (1) set of RCA cables. 4) One (1) 1/8” mini plug. 5) Warranty card. 2. Installing the Units Place your unit on a flat surface or mount it ...

Page 6 - GENERAL FUNCTIONS AND CONTROLS; PROGRAM

GENERAL FUNCTIONS AND CONTROLS American DJ ® AUDIO • PRO DJ3™ INSTRUCTION MANUAL • PAGE 6 A. TOP UNIT CONTROLS (FIGURE 3) 1. MEMORY CUE - Pressing the MEMORY CUE button after loading a new disc and before closingthe tray, will restore any Cue memory that may bestored on that disc. A maximum of six (...

Page 7 - PITCH

control when the CD is in pause or cue modes allowing you to set a cue point. B. The inner wheel also works as a pitch bend during playback. Turning the wheel clockwise will increase the pitch percentage up to 16%, and turning the wheel in the counterclockwise direction will decrease the pitch perce...

Page 10 - BASIC OPERATIONS

1. OPENING AND CLOSING THE DISC TRAY/LOADING DISCS This is an electronic operation and can only work when the power is on. Press the OPEN/CLOSE BUTTON (4) to open or close the disc tray. Pressing the PLAY BUTTON (9) , will also automatically close the tray if it is open and immediately cue any CD th...

Page 11 - JOG

American DJ ® AUDIO • PRO DJ3™ INSTRUCTION MANUAL • PAGE 11 8. FRAME SEARCH This feature allows you to scroll through a track to set a starting cue, sample,or loop point. To use the scroll function you must first be in Pause Mode or CueMode. Once you are in Pause or Cue mode, use your finger tip to ...

Page 12 - creating and play a seamless loop”; TIME BAR INDICATOR -

• Replay LoopThe RELOOP (16) function allows you to return to your stored loop at any time. The IN/R CUE (12) and OUT/EXIT (14) LEDs will indicate a loop is stored in memory, and may be played at any time. To replay the loop, press the RELOOP BUTTON (16) . The IN/R. CUE (12) and OUT/EXIT (14) LEDs w...

Page 13 - To Store a cue point:; MEMORY

played more than once. To create a program:1) Be sure a disc is inserted in the drive and press the PROGRAM BUTTON (3) . Pressing the PROGRAM BUTTON (3) from any function will immediately pause the disc and go into program mode. 2) After pressing the PROGRAM BUTTON (3) to activate the units program ...

Page 14 - To reverse play a sample:

American DJ ® AUDIO • PRO DJ3™ INSTRUCTION MANUAL • PAGE 14 16. Using the Built In Sampler Your PRO DJ3 comes with a built in sampler. You may store up to six samples per a disc on the SIX CUE BUT- TON (2) . Your sample can be a maximum of 2.6 seconds in length. A sample can be recalled while a CD i...

Page 15 - To recall these points when a disk has been removed:; Do not close the CD tray!; To Flip-FLOP single tracks or programmed tracks:

To recall these points when a disk has been removed: 1) When the PRO DJ3 is on, open the transport tray. 2) Place the disc that has your stored cue points onto the transport tray. Do not close the CD tray! 3) With the CD tray open, and disc loaded on the transport tray, push the MEMORY CUE BUTTON (1...

Page 16 - PRECAUTIONS ON HANDLING COMPACT DISCS; PRECAUTION ON STORAGE; COMPACT DISCS; DO NOT; switch off the power when; BEFORE SWITCHING OFF THE POWER

1. PRECAUTIONS ON HANDLING COMPACT DISCS • Do not allow fingerprints, oil or dust to get on the surface of the disc. If the disc is dirty, wipe it off with a soft dry cloth. • Do not use benzene, thinner, water, record spray, electrostatic-proof chemicals, or silicone-treated cloths to clean discs. ...

Page 17 - SPECIFICATIONS

GENERAL Type: Twin mechanism compact disc player. Disc type: Standard compact discs (5 in / 12cm and 3in/8cm discs) Dimensions: 3 1/4” ~ 4 1/2” H x 8 1/2” W x 10 3/8” L Installation: Place on flat surface or mount in flat caseWeight: 4 1/2 Lbs. / 1 3/4 kgs Power supply: 115/230V AC, 50/60Hz Power co...