Amana VCB- Manuals

2 See the outdoor unit Installation Instructions for other “Safe Refrigerant Handling” guidelines. The LAC01A Kit is installed onto the unit discharge line fitting. To install, remove and set aside the control box coverand screws. Carefully swing the control box cover 90° counterclockwise and follow...

3 1. Disconnect the Violet-20 fan motor lead (not the compressor lead) from the contactor (Terminal T2 onsingle-phase units, Terminal T1 on three-phaseunits). 2. Install the supplied straight female terminal wire (blue), onto the contactor (Terminal T2 on single-phase units, Terminal T1 on three pha...

4 ® is a trademark of Maytag Worldwide N.V. and is used under license toGoodman Company, L.P. All rights reserved. CAUTION Avoid servicing the low ambient control while the unit is operating. The rotating fan bladescould cause serious injury. If measurement of the high side pressure is required, use...