Amana VCB- User Manual
Amana VCB– User Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – RCC/RCE Single Phase Units; INSTALLATION INSTRUCTIONS; WARNING
- Page 3 – FINAL WIRING; Single-Phase Unit Shown
- Page 4 – CAUTION; SERVICER’S NOTE
C o m fo r t. Q u a l i ty . Tru st.
Heating
®
&
Air Conditioning
LOW AMBIENT CONTROL
I
NSTALLATION
I
NSTRUCTIONS
Goodman Company, L.P.
1810 Wilson Parkway • Fayetteville, Tennessee 37334
www.amana-hac.com
LAC01A
Description
The Low Ambient Control LAC01A kit is designed for use with
Amana
®
RCC, RCE single-phase
remote condensing
units, and
Amana
®
RCB, VCA and VCB three-phase
remote condensing units. As shipped, these condensing units
are suitable for operation at outdoor temperatures of
50°F
and above
. Used in conjunction with the LAC01A kit,
these units can be used in
outdoor ambient temperatures
as low as 35°F.
This control operates by stopping the
outdoor fan when the high side pressure becomes too low. The fan will automatically restart when the high side
pressure rises.
CAUTION
To avoid compressor damage and loss of warranty coverage, do NOT install this kit in an
indoor coil system that does not include a thermostatic expansion valve.
This kit includes:
Refrigerant Tee, With Two Valve Cores
Low Ambient Cutout Control
Wire Nut
Low Ambient Label
Installation Instructions
Teflon Seals
Part No. 10664121 Rev. 1
Printed in USA
November 2002
ATTENTION INSTALLING PERSONNEL
As a professional installer you have an
obligation to know the product better than the
customer. This includes all safety precautions
and related items.
Prior to actual installation, thoroughly familiarize
yourself with this Instruction Manual. Pay
special attention to all safety warnings. Often
during installation or repair it is possible to place
yourself in a position which is more hazardous
than when the unit is in operation.
Remember, it is your responsibility to install the
product safely and to know it well enough to be
able to instruct a customer in its safe use.
Safety is a matter of common sense...a matter
of thinking before acting. Most dealers have a
list of specific good safety practices...follow
them.
The precautions listed in this Installation Manual
are intended as supplemental to existing
practices. However, if there is a direct conflict
between existing practices and the content of
this manual, the precautions listed here take
precedence.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 See the outdoor unit Installation Instructions for other “Safe Refrigerant Handling” guidelines. The LAC01A Kit is installed onto the unit discharge line fitting. To install, remove and set aside the control box coverand screws. Carefully swing the control box cover 90° counterclockwise and follow...
3 1. Disconnect the Violet-20 fan motor lead (not the compressor lead) from the contactor (Terminal T2 onsingle-phase units, Terminal T1 on three-phaseunits). 2. Install the supplied straight female terminal wire (blue), onto the contactor (Terminal T2 on single-phase units, Terminal T1 on three pha...
4 ® is a trademark of Maytag Worldwide N.V. and is used under license toGoodman Company, L.P. All rights reserved. CAUTION Avoid servicing the low ambient control while the unit is operating. The rotating fan bladescould cause serious injury. If measurement of the high side pressure is required, use...
