Amana MDK01E- Manuals

Amana MDK01E– Installation Manual in PDF format online.

Manuals:

Installation Manual Amana MDK01E

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7

Summary

Page 2 - Installation Dimensions; TOP; Hole Placement Template

2 OUTSIDE WALL WALL SLEEVE UNIT FRONT END OFDUCTEXTENSION 1/2" TRANSITION 2-3/4" MIN (FOR SUBBASE KIT) 1/4" MIN 7-1/2" 18-3/8" 5" FLOOR LINE SUBBASE KIT INNER WALLCUT-OUT BOTTOM OF WALL SLEEVE 2-3/8" MIN (FOR DUCT KIT) 3-1/4" MIN 10" 20-1/2" MAX Installation D...

Page 3 - MDK Installation Instructions; Cabinet Front Removal; WARNING; disconnect power; TRANSITION; Transition Assembly

3 MDK Installation Instructions 1. If the cabinet front is screwed to the chassis, removethe screw located behind the inlet grille. Pull the inletgrille forward from the top of the grille to access twoscrews. 2. Remove cabinet front from chassis by tilting the bot-tom of the front forward, lifting s...

Page 4 - Install chassis back into wall sleeve.; Wall Sleeve Hole Placement; If there is not enough clearance between; Mounting Brackets Installation; RIGHT SHIFT

4 P RE -A SSEMBLY (W ALL S LEEVE ) H OLE D IMENSION AND P LACEMENT 1. Unplug and remove chassis from wall sleeve. Drill two1/8” holes on left and right sides of wall sleeve inproper locations (see template on page 2). 2. Install chassis back into wall sleeve. 3. Install transition/front assemby on t...

Amana Manuals