Alpine SWD-1600 - Manuals - manualsarea.com

Page 2 - CAUTION

EN USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURLEY. Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failur...

Page 3 - CAUTION IN USE; When installing, always use the brackets that are supplied.; “remote turn on” lead connected to the product, then please turn

EN CAUTION IN USE Caution! When installing, always use the brackets that are supplied. This product is supplied with brackets for safe use and installation. When installing, always use these brackets to firmly fix the product into place.For further information, please refer to the “installation” pag...

Page 4 - Use of a mobile phone may cause interference and noise.

EN Always use the extension power lead included (with 12A fuse), and connect directlyto the +ve battery terminal. Only use the extension power cable included.Also, please ensure to connect this directly to the +ve battery terminal. Should you feed off power from the standard vehicle loom, the produc...

Page 5 - TROUBLESHOOTING; SYMPTOMS; SPECIFICATIONS

EN TROUBLESHOOTING If you have a problem with the product then please check the following before taking for repair. SYMPTOMS REASON SOLUTION Unit does not operate. (For example if the fuse is blown) The head unit is not powered up. Check the earth lead connection Earth lead is not connected properly...

Page 6 - PACKING LIST; PRODUCT NAME; Connector; Carry out the Installation.; Recommended location for install

EN PACKING LIST PRODUCT NAME PRODUCT NAME QTY QTY Connector 1 Power lead extension cable (2.5M) 1 Speaker to RCA connector (3M) 2 Mounting brackets 3 Self tapping screw 6 Machine screw 3 1. INSTALLATION • Please ensure that there is sufficient length of the various cables for your desired subwoofer ...

Page 8 - WARNING - DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.; Self tapping screw

EN WARNING - DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES. When drilling holes in the chassis for installation, take precautions so as not to contact, damage or obstruct pipes, fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire. Self tapping screw Bracket...

Page 10 - • Make all connections securely.; Memo

EN • Make all connections securely. • Any unused connections should be insulated with electrical insulation tape. Memo • On cars fitted with computers and other such devices (e.g. head units with security code), you may loose the memory when disconnecting the negative lead. • This product cannot be ...

Page 11 - • CONNECTIONS FOR SPEAKER LEVEL INPUT

EN • CONNECTIONS FOR SPEAKER LEVEL INPUT Head Unit If your head unit does not have this lead, then please connect to the the ACC lead of the vehicle. The lead that supplies power when the key is at the ACC position. Remote turn on Blue/White Black Ground connection FUSE(12A) Yellow Battery extension...

Page 12 - DO NOT EXCEED THE INPUT LEVEL SPECIFIED FOR THIS PRODUCT.

EN 3. CHECK 1 Secure all loose cables. CAUTION - ARRANGE THE WIRING SO IT IS NOT CRIMPED OR PINCHED BY A SHARP METAL EDGE. Route the cables and wiring away from moving parts (like the seat rails) or sharp or pointed edges. This will prevent crimping and damage to the wiring. If wiring passes through...