Alpine SWD-1600 - Manual
Alpine SWD-1600 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – CAUTION
- Page 3 – CAUTION IN USE; When installing, always use the brackets that are supplied.; “remote turn on” lead connected to the product, then please turn
- Page 4 – Use of a mobile phone may cause interference and noise.
- Page 5 – TROUBLESHOOTING; SYMPTOMS; SPECIFICATIONS
- Page 6 – PACKING LIST; PRODUCT NAME; Connector; Carry out the Installation.; Recommended location for install
- Page 8 – WARNING - DO NOT DAMAGE PIPE OR WIRING WHEN DRILLING HOLES.; Self tapping screw
- Page 10 – • Make all connections securely.; Memo
- Page 11 – • CONNECTIONS FOR SPEAKER LEVEL INPUT
- Page 12 – DO NOT EXCEED THE INPUT LEVEL SPECIFIED FOR THIS PRODUCT.
EN
SWD-1600
a
Class D Amplifier Active Subwoofer
Please follow these instructions for your safety
•
Introduction:
Please read this owners manual thoroughly to familiarise yourself with each control and function. We at
Alpine hope that your new SWD-1600 will give you many years of listening enjoyment.
In case of problems when installing your SWD-1600, please contact your authorised Alpine dealer.
Owners Manual
This symbol means important instructions.
Failure to heed them can result in serious injury or death.
CAUTION
DO NOT DISASSEMBLE OR ALTER. Doing so may result in an accident, fire or electric shock.
KEEP SMALL OBJECTS SUCH AS BOLTS OR SCREWS OUT OF THE REACH OF
CHILDREN. Swallowing them may result in serious injury. If swallowed, consult a doctor
immediately.
USE THE CORRECT AMPERE RATING WHEN REPLACING FUSES. Failure to do to may result
in fire or electric shock.
USE ONLY IN CARS WITH A 12 VOLT NEGATIVE GROUND. (Check with your dealer if you are
not sure.) Failure to do so may result in fire, etc.
BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL.
Failure to do so may result in electric shock or injury due to electrical shorts.
DO NOT SPLICE INTO ELECTRICAL CABLES. Never cut away cable insulation to supply power
to other equipment. Doing so will exceed the current carrying capacity of the wire and result in fire
or electric shock.
DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS. Arrange
the wiring and cables in compliance with the manual to prevent obstructions when driving. Cables
or wiring that obstruct or hang up on places such as the steering wheel, gear lever, brake pedals,
etc. can be extremely hazardous.
DO NOT DAMAGE PIPES OR WIRING WHEN DRILLING HOLES. When drilling holes in
the chassis for installation, take precautions so as not to contact, damage or obstruct pipes,
fuel lines, tanks or electrical wiring. Failure to take such precautions may result in fire.
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
EN USE SPECIFIED ACCESSORY PARTS AND INSTALL THEM SECURLEY. Be sure to use only the specified accessory parts. Use of other than designated parts may damage this unit internally or may not securely install the unit in place. This may cause parts to become loose resulting in hazards or product failur...
EN CAUTION IN USE Caution! When installing, always use the brackets that are supplied. This product is supplied with brackets for safe use and installation. When installing, always use these brackets to firmly fix the product into place.For further information, please refer to the “installation” pag...
EN Always use the extension power lead included (with 12A fuse), and connect directlyto the +ve battery terminal. Only use the extension power cable included.Also, please ensure to connect this directly to the +ve battery terminal. Should you feed off power from the standard vehicle loom, the produc...
