Allied Telesis 86241-02 - Manuals

Page 2 - Patch Release Note

2 Patch Release Note Patch 86241-02 for Software Release 2.4.1 C613-10340-00 REV B Features in 86241-02 Patch 86241-02 includes all issues resolved and enhancements released in previous patches for Software Release 2.4.1, and the following enhancements: IPX traffic passing between two switch instanc...

Page 4 - On models except Rapier

4 Patch Release Note Patch 86241-02 for Software Release 2.4.1 C613-10340-00 REV B If a packet with a destination IP address equal to a VRRP IP address was received when the router didn’t own the IP address, (because it didn’t have an interface with that IP address) the router incorrectly tried to f...

Page 6 - actCmdFail

6 Patch Release Note Patch 86241-02 for Software Release 2.4.1 C613-10340-00 REV B It is now possible to set a preference value for dynamically learned routes based on their protocol using the command: SET IP ROUTE PREFERENCE={DEFAULT|1..65535} PROTOCOL={BGP-EXT|BGP-INT|OSPF-EXT1|OSPF-EXT2|OSPF-INTE...

Page 7 - ifOutOctets

Patch 86241-02 For Rapier Switches and AR800 Series Modular Switching Routers 7 Patch 86241-02 for Software Release 2.4.1C613-10340-00 REV B Address learning on the mirror port is now correctly re-enabled when it is no longer the mirror port. New commands have been added to enable the addition and d...

Page 8 - The SHOW TCP command was not showing the listening status for IPv6.

8 Patch Release Note Patch 86241-02 for Software Release 2.4.1 C613-10340-00 REV B The Trace utility has been modified. Previously, Trace sent a group of packets at once and waited for multiple responses in order to assess the minimum, maximum and average time to cover a certain "hop distance...

Page 9 - Base Software Release File

Patch 86241-02 For Rapier Switches and AR800 Series Modular Switching Routers 9 Patch 86241-02 for Software Release 2.4.1C613-10340-00 REV B ICMPv6 was returning an error for non-zero fragment offsets. This issue has been resolved. The GUI was incorrectly accepting multiple entries for VLANs. This i...

Page 10 - A new command allows the Layer 3 aging timer to be changed:

10 Patch Release Note Patch 86241-02 for Software Release 2.4.1 C613-10340-00 REV B A new command allows the Layer 3 aging timer to be changed: SET SWITCH L3AGEINGTIMER=<seconds> where seconds can be 30 - 43200. After each cycle of the ageing timer, all existing Layer 3 entries with the hit bi...

Page 11 - Availability; licence or password is not required to use a patch.; Network affecting: No

Patch 86241-02 For Rapier Switches and AR800 Series Modular Switching Routers 11 Patch 86241-02 for Software Release 2.4.1C613-10340-00 REV B A dual Ethernet router was incorrectly accepting an IP address from a DHCP server when the offered address was on the same network as the other Ethernet inter...