Allied Telesis 86241-02 - Manual
Allied Telesis 86241-02 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – Patch Release Note
- Page 4 – On models except Rapier
- Page 6 – actCmdFail
- Page 7 – ifOutOctets
- Page 8 – The SHOW TCP command was not showing the listening status for IPv6.
- Page 9 – Base Software Release File
- Page 10 – A new command allows the Layer 3 aging timer to be changed:
- Page 11 – Availability; licence or password is not required to use a patch.; Network affecting: No
S i m p l y c o n n e c t i n g t h e w o r l d
Patch Release Note
Patch 86241-02
For Rapier Switches and AR800 Series
Modular Switching Routers
Introduction
This patch release note lists the issues addressed and enhancements made in
patch 86241-02 for Software Release 2.4.1 on existing models of Rapier L3
managed switches and AR800 Series L3 modular switching routers. Patch file
details are listed in Table 1.
This release note should be read in conjunction with the following documents:
■
Release Note: Software Release 2.4.1 for Rapier Switches, AR300 and
AR700 Series Routers, and AR800 Series Modular Switching Routers
(Document Number C613-10338-00 Rev A) available from
www.alliedtelesyn.co.nz/documentation/documentation.html
■
Rapier Switch Documentation Set for Software Release 2.4.1 available on
the Documentation and Tools CD-ROM packaged with your switch, or
from
www.alliedtelesyn.co.nz/documentation/documentation.html
.
WARNING: Using a patch for a different model or software release may cause
unpredictable results, including disruption to the network. Information in this
release note is subject to change without notice and does not represent a
commitment on the part of Allied Telesyn International. While every effort has
been made to ensure that the information contained within this document and
the features and changes described are accurate, Allied Telesyn International
can not accept any type of liability for errors in, or omissions arising from the
use of this information.
Table 1: Patch file details for Patch 86241-02.
Base Software Release File
86s-241.rez
Patch Release Date
25-Oct-2002
Compressed Patch File Name
86241-02.paz
Compressed Patch File Size
132368 bytes
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
2 Patch Release Note Patch 86241-02 for Software Release 2.4.1 C613-10340-00 REV B Features in 86241-02 Patch 86241-02 includes all issues resolved and enhancements released in previous patches for Software Release 2.4.1, and the following enhancements: IPX traffic passing between two switch instanc...
4 Patch Release Note Patch 86241-02 for Software Release 2.4.1 C613-10340-00 REV B If a packet with a destination IP address equal to a VRRP IP address was received when the router didn’t own the IP address, (because it didn’t have an interface with that IP address) the router incorrectly tried to f...
6 Patch Release Note Patch 86241-02 for Software Release 2.4.1 C613-10340-00 REV B It is now possible to set a preference value for dynamically learned routes based on their protocol using the command: SET IP ROUTE PREFERENCE={DEFAULT|1..65535} PROTOCOL={BGP-EXT|BGP-INT|OSPF-EXT1|OSPF-EXT2|OSPF-INTE...