Allied Telesis 613-001480 - Manuals

Page 2 - AT-8000S Installation Guide

AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 2 Allied Telesis, Inc. Supported Platforms The following platforms are included in the AT-8000S family of devices: AT-8000S/16 – 16 FE ports with 1 combo 10/100/1000 SFP Port. AT-8000S/24 – 24 FE ports with modular configuration ...

Page 4 - Known Issues

AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 4 Allied Telesis, Inc. Port lock: Port security mechanism is not triggered for MAC violation if MAC is learned on another locked port as a secured MAC address. Recommended User Work Around: No work around Mac-group mapping and 80...

Page 5 - You can download Version 3.0.0.41 files from our web site at

AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 5 Allied Telesis, Inc. Version 3.0.0.41 Upgrade Process You must have the correct software and bootloader installed on your switch before beginning the upgrade process to Version 3.0.0.41. Perform the following procedure: Note If you...

Page 6 - Note

AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 6 Allied Telesis, Inc. 6. Assuming your switch is running the correct bootloader, you have the correct password to extract the ats94-30041.ros software upgrade file and you know that your current bootloader is compatible with the Ver...

Page 7 - For each switch in a stack -; Switch the active image for next reboot.; Software Installed with Incorrect Bootloader; Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.

AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 7 Allied Telesis, Inc. 10. Before rebooting the stand alone switch or stack, you must change the active image, including each slave switch in the stack. To check the active image for each switch use the following command. Show bootva...

Page 8 - History of Resolved Issues

AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 8 Allied Telesis, Inc. 5. Select number one by pressing the ‘1’ key. The switch will respond with the following message: Begin the transmission of a previous version.Downloading code using XMODEM.You may proceed with the xmodem trans...

Page 9 - Features History; Dot1x Legacy compliant

AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 9 Allied Telesis, Inc. Version 3.0.0.33 When the master was lost (powered down) the SFP port(s) on backup changed to DOWN – link changed to half duplex and remained down. This issue has been resolved. Version 3.0.0.32 Unregistere...

Page 11 - The following 802.1x feature enhancements will be supported:; authorization is not required for them.; IPv6 Host; IPv6 was not tested for UNH/DoD certification.; Configurable Login Banner; - The system supports a text based banner that is

AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 11 Allied Telesis, Inc. The following 802.1x feature enhancements will be supported: — Guest VLAN - This feature allows network administrators to give some limited access to the network to unauthorized ports. The port would be a memb...

Page 12 - During the software upgrade ensure the following:; final code drop; Back up configuration files to an external device.; Version; SW Download

AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 12 Allied Telesis, Inc. Upgrade Procedure from Version 1.0.0.25 All software released after version 1.0.0.25 requires additional FLASH sectors beyond the current amount of FLASH sectors currently allocated for the image. Therefore th...

Page 15 - For a stand alone switch -; This command will switch the active image for next reboot.

AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 15 Allied Telesis, Inc. 14. Before rebooting the stand alone switch or stack, you must change the active image, including each slave switch in the stack. To check the active image for each switch use the following command. Show bootv...

Page 16 - Contacting Allied Telesis; . You can use the Knowledge Base to submit questions to our; Copyright

AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 16 Allied Telesis, Inc. Contacting Allied Telesis This section provides Allied Telesis contact information for technical support as well as sales and corporate information. Online Support You can request technical support online by a...