Allied Telesis 613-001480 - Manual
Allied Telesis 613-001480 – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.
Table of Contents:
- Page 2 – AT-8000S Installation Guide
- Page 4 – Known Issues
- Page 5 – You can download Version 3.0.0.41 files from our web site at
- Page 6 – Note
- Page 7 – For each switch in a stack -; Switch the active image for next reboot.; Software Installed with Incorrect Bootloader; Autoboot in 2 seconds - press RETURN or Esc. to abort and enter prom.
- Page 8 – History of Resolved Issues
- Page 9 – Features History; Dot1x Legacy compliant
- Page 11 – The following 802.1x feature enhancements will be supported:; authorization is not required for them.; IPv6 Host; IPv6 was not tested for UNH/DoD certification.; Configurable Login Banner; - The system supports a text based banner that is
- Page 12 – During the software upgrade ensure the following:; final code drop; Back up configuration files to an external device.; Version; SW Download
- Page 15 – For a stand alone switch -; This command will switch the active image for next reboot.
- Page 16 – Contacting Allied Telesis; . You can use the Knowledge Base to submit questions to our; Copyright
PN 613-001480 Rev A
1
AT-S94 Version 3.0.0.41
AT-8000S Switch
Software Release Notes
Please read this document before you begin to use the management software.
Caution
Failure to upgrade the bootloader before the release software can result in a switch that will
not boot. Please read the upgrade instructions in this SRN carefully.
This document contains the following sections:
“Supported Platforms” on page 2
“Product Documentation and Software” on page 2
“What’s New in Version 3.0.0.41” on page 3
– “New Software Features” on page 3
– “Resolved Issues” on page 3
– “Operational Notes” on page 3
– “Known Issues” on page 4
– “New Hardware Features” on page 4
“Version 3.0.0.41 Upgrade Process” on page 5
– “Software Installed with Incorrect Bootloader” on page 7
“History of Resolved Issues” on page 8
“Upgrade Procedure from Version 1.0.0.25” on page 12
"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.
Summary
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 2 Allied Telesis, Inc. Supported Platforms The following platforms are included in the AT-8000S family of devices: AT-8000S/16 – 16 FE ports with 1 combo 10/100/1000 SFP Port. AT-8000S/24 – 24 FE ports with modular configuration ...
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 4 Allied Telesis, Inc. Port lock: Port security mechanism is not triggered for MAC violation if MAC is learned on another locked port as a secured MAC address. Recommended User Work Around: No work around Mac-group mapping and 80...
AT-S94 Version 3.0.0.41 Software Release Notes PN 613-001480 Rev A 5 Allied Telesis, Inc. Version 3.0.0.41 Upgrade Process You must have the correct software and bootloader installed on your switch before beginning the upgrade process to Version 3.0.0.41. Perform the following procedure: Note If you...
