AEG Protect Home. 600 VA- Manuals

7 The output may be live, even if the UPS is not connected to the mains supply, as the UPS has its own internal power supply (battery)! For health and safety reasons, the unit must be earthed correctly! PROTECT HOME. may only be operated with or connected to a 230 VAC mains with protective grounding...

10 3 System Description i PROTECT HOME. is an uninterruptible power supply (UPS) for essential loads such as personal computers (PCs), satellite TV’s, telecommunication equipment and similar devices. It consists of: ♦ Mains filter in the mains input incl. mains energy back feed protection ♦ Battery ...

11 4 UPS overview Connections, Operation / Display Elements: Top view Side view Power switch of the UPS (mains switch) Green LED:Normal / power mode Yellow LED: Battery mode Red LED: Warning / failure Surge protected only receptacles (without UPS protection) Battery power supplied receptacles (with ...

12 4.1 Specifications MODEL PROTECT HOME. Type power 600 VA / 300 W Input voltage 230 Vac ( 1ph ~ / N / PE ) Input voltage range without battery mode + 6% / - 10% Frequency (auto selection) 50 / 60 Hz ± 5 Hz UPS-input power consumption 3.0 A max. Rated output voltage /AVR-technology 230 Vac Rated ou...

13 Backup mode Sounding every 5 seconds Overload Sounding every second Battery replacement Sounding 2 times per seconds Acoustic alarm Fault UPS Continuously sounding Size W x H x D 125 mm x 85 mm x 300 mm Weight 3.5 kg Operating temperature range 0° - 40°C Relative humidity 20% – 90 % Protection ty...

14 5 Set-Up and Operation Installing the UPS is as easy as following the steps shown. 5.1 Inspection Remove the UPS from its packaging and inspect it for damage that may have occurred during shipping. If any damage is discovered, repack the unit and return it to the place of purchase. 5.2 Placement ...

16 Do not plug heaters or other large electrical device with high power consumption into the UPS. The power demands of these devices will overload and can execute the input fuse of the PROTECT HOME. 5.6 Modem / Phoneline Connection Plug incoming internet line into the “In” socket at the side panel o...

17 The connection vie the USB connector will be auto detected. 5.9 Turn On/Off To turn on the PROTECT HOME., press the on/off switch. To turn off the PROTECT HOME., press the on/off switch again. 5.10 DC Start Function The DC Start Function enables UPS to be started up when AC utility power is not a...

18 5.12 Battery removal Battery replacement should be performed by qualified service personnel. Keep unauthorized persons away from the batteries! Disconnect all power sources before battery replacement. Follow Fig. 1 below to remove the screws located on the bottom of the UPS to open the battery co...

19 5.13 Shutdown- and UPS management software The "CompuWatch" software specially developed for these purposes by AEG continuously checks the mains supply and the UPS status. In conjunction with the "intelligent" UPS, this ensures that the availability of IT components and data secur...

20 6 Trouble shooting Error Cause Remedy Yellow LED is lighting, but audible alarm is heard intermittently. UPS not connected properly to the mains. Connect the UPS according to the installation guide. UPS is functioning but audible alarm is heard periodically. UPS overload. Verify that the load mat...

21 Guarantee certificate Type: …….…………………...................................................... Serial-no.: ……………………..……………............................... Date of purchase: …………….............……………………........ Trading stamp / Signature Specifications are subject to change without notice. AEG Power Sol...