AEG HK956600FB- Manuals

Sensorfield Function Comment 9 Power function To activate and deactivate the function. 10 - Control bar To set a heat setting. 11 - To select the cooking zone. 12 / - To increase or decrease the time. 13 - Control bar To set the heat setting for flexible inductioncooking area. 3.3 Heat setting displ...

4. DAILY USE WARNING! Refer to Safety chapters. 4.1 Activating and deactivating Touch for 1 second to activate or deactivate the hob. 4.2 Automatic Switch Off The function deactivates the hob automatically if: • all cooking zones are deactivated, • you do not set the heat setting after you activate ...

induction cooking zone only for a limited period of time. After this time the induction cooking zone automatically sets back to the highest heat setting. Refer to “Technical information” chapter. To activate the function for a cookingzone: touch . comes on. To deactivate the function: change the hea...

5. FLEXIBLE INDUCTION COOKING AREA WARNING! Refer to Safety chapters. 5.1 FlexiBridge function The flexible induction cooking area consists of four sections. The sections can be combined into two cooking zones with different size, or into one large cooking area. You choose the combination of the sec...

Incorrect cookware position: 5.3 FlexiBridge Big Bridge mode To activate the mode press until you see the correct mode indicator. This mode connects three rear sections into one cooking zone. The one front section is not connected and operates as a separate cooking zone. You can set the heat setting...

Incorrect cookware position: 5.5 PowerSlide function This function allows you to adjust the temperature by moving the cookware to a different position on the induction cooking area.The function divides the induction cooking area into three areas with different heat settings. The hob senses the posit...

Activating the function To activate the function place the cookware in the correct position on thecooking area. Touch . The indicator above the symbol comes on. If you do not place the cookware on the cookingarea comes on and after 2 minutes the flexible induction cooking area is setto . Deactivatin...

6.4 Examples of cooking applications The relation between the heat setting and the cooking zone consumption of power is not linear. When you increase the heat setting, it is not proportional to the increase of the cooking zone consumption of power. It means that the cooking zone with the medium heat...

• Use a special scraper for the glass. 7.2 Cleaning the hob • Remove immediately: melted plastic, plastic foil, sugar and food with sugar. If not, the dirt can cause damage to the hob. Take care to avoid burns. Put the special scraper on the glass surface at an acute angle and move the blade on the ...

Problem Possible cause Remedy The cookware is incorrect. Use the correct cookware.Refer to “Hints and tips”chapter. The diameter of the bottomof the cookware is too smallfor the zone. Use cookware with correctdimensions.Refer to “Technical informa-tion” chapter. FlexiBridge function oper-ates. One o...

free of charge, also during the warranty period. The instructions about the Service Centre and conditions of guarantee are in the guarantee booklet. 9. INSTALLATION WARNING! Refer to Safety chapters. 9.1 Before the installation Before you install the hob, write down the information bellow from the r...

9.6 Protection box If you use a protection box (an additional accessory), the front airflow space of 2 mm and the protective floor directly below the hob are not necessary. The protection box accessory may not be available in some countries. Please contact your local supplier. You can not use the pr...

11. ENERGY EFFICIENCY 11.1 Product information according to EU 66/2014 Model identification HK956600FB Type of hob Built-In Hob Number of cooking zones 2 Number of cooking areas 1 Heating technology Induction Diameter of circular cook-ing zones (Ø) Middle rearRight front 21.0 cm21.0 cm Lenght (L) an...