ADTRAN 1xN - Manuals - manualsarea.com

Page 2 - Switch Customer Interface Module; Functional Description; Section 9

2 61190860L1-5B Section 61190860L1-5, Issue 2 The SCIM can be locally powered by -48 VDC, orspan powered from the standby unit in slot 8 ifequipped for span power. Slide switch S1 selectsbetween local or span power. CPE receive andtransmit connections are either amphenol or RJ-48Cjacks. Revision His...

Page 3 - Warranty and Customer; Mounting Procedure; Frame Ground; Facility Side; Table 1. LED Indication

3 61190860L1-5B Section 61190860L1-5, Issue 2 Documentation associated with the listed cardsprovides information on implementing the auto-protectfunction. LED Indication Table 1 describes LED indication. • All LEDs OFF indicates no power to the SCIM. • All LEDs flashing red indicates the protect car...

Page 4 - Customer Side; N O T E; Mounting; Figure 2; for SCIM Card connections,

4 61190860L1-5B Section 61190860L1-5, Issue 2 Wire-Wrap – The to-facility and from-facilitywire-wraps are an alternate method in lieu of theamphenol connections. Customer Side Amphenol Connection – The to-CPE and from-CPEamphenols should be left-side oriented to preventSCIM panel removal interferenc...

Page 6 - Figure 3; CENTRAL OFFICE

6 61190860L1-5B Section 61190860L1-5, Issue 2 the controller card. The controller card willcontinuously monitor the network receive T1transmission service in slot 8 (i.e. standby line) forcommands. Upon the receipt of these commands, thecontroller card will initiate the T1 service switchoverfrom the...

Page 8 - Arming; for; Table 4

8 61190860L1-5B Section 61190860L1-5, Issue 2 DSX-1 DCS TEST T1 T1 / HDSL / HDSL2 Office Repeater Bay Office Repeater or HTU-C < Live Traffic > < Live Traffic > < Arming Codes > Main Standby < Arming Code > WECO D4 WESCOM 3192 CENTRAL OFFICE CUSTOMER PREMISES ARMING OPERATION...

Page 9 - In-band Protection Switch Protocol; Table 5; See; Table 6; See; Table 7

9 61190860L1-5B Section 61190860L1-5, Issue 2 In-band Protection Switch Protocol See Table 5 for in-band protection switch protocol. Out-of-Band Enable/Disable Protocol See Table 6 for out-of-band slot enable/disable protocol. Out-of-Band Protection Switch Protocol See Table 7 for out-of-band protec...

Page 10 - Figure 5; and; Figure 6; for switchover codes; Switchback Receive Path

10 61190860L1-5B Section 61190860L1-5, Issue 2 See Figure 5 and Figure 6 for switchover codes and traffic results. 8. SWITCHBACK Switchback operation is defined as there-establishment of the T1 transmission path betweenthe network and the customer using the regularlyassigned line. Communication betw...

Page 11 - In-band Release Protocol; Table 8; Table 9; for return to normal operation.; Signal Transmit; The controller card will transmit a 0 dB signal.; Figure 7

11 61190860L1-5B Section 61190860L1-5, Issue 2 In-band Release Protocol See Table 8 for return to normal operation. Out-of-Band Release Protocol See Table 9 for return to normal operation. Signal Transmit The controller card will transmit a 0 dB signal. Line Build Out (LBO) The controller card will ...

Page 12 - Table 10. Specifications

12 61190860L1-5B Section 61190860L1-5, Issue 2 10. SPECIFICATIONS See Table 10 for Specifications. Table 10. Specifications n o i t a c i f i c e p S : e c a f r e t n I l a c i s y h P e r i W - 4 : l a n g i S r a l o p i B 1 T : g n i d o C e l b i t a p m o c S Z 8 B r o I M A : g n i m a r F d ...