Addonics Technologies DVD R/RW - Manuals

Page 2 - FCC Warning Statement; Reorient or relocate the receiving antenna

FCC Warning Statement This equipment has been tested and found to comply with the limits for a class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates,...

Page 3 - Contents; General Information

Contents FCC Warning .............................................................................. 1 Contents ...................................................................................... 2 Chapter 1 Preface ....................................................................... 3 General ...

Page 4 - Fast one to one DVD/CD Duplicator

Chapter 1 Preface This is a Preliminary version of the manual intended to provide advance information on the Addonics Technologies’ external DVD DigiCopier drive. The information is as complete and as accurate as possible as of the publication date, but will be superseded and updated periodically by...

Page 5 - Firewire Cable; For; Serial ATA Cable; Serial ATA cable with 36 pin connector

Chapter 2 Getting Started Make sure that you have the following items: For DVD±R/RW DigiCopier with USB2.0 Cable ! One DVD±R/RW DigiCopier main unit ! USB2.0 cable with 36 pin connector ! Sonic MyDVD Software ! DVD/CD Mastering software ! MPEG II CD playback software ! USB driver diskette ! Power Ca...

Page 6 - Chapter 3 Switch Settings on back of unit; Figure 1; Up position = Duplicator

Chapter 3 Switch Settings on back of unit Figure 1 S3 S2 S1 C2 C1 C1 – Analog audio connectors C2 – Interface cable connector S1 – Duplicator and External switch Up position = Duplicator Center = Neutral Down position = External DVD±R/RW S2 – Buzzer 6 = ON (factory default) 7 = OFF 0-5 (reserved) S3...

Page 7 - - after placing the source CD and a; Verify or Compare; - after placing the source CD and a target; Erase; – Copy the new firmware file onto a blank CD

DVD DigiCopier Switch Settings description # Copy, Test, Test and Copy - after placing the source CD and a Blank Disc into the target DVD±R/RW drive, the copy controller will detect if the disc in the writer is a blank one. If it is a blank disc, the copy controller will automatically begin copying ...

Page 8 - Chapter 4; Connect the power cable to the back of the DVD DigiCopier.

Chapter 4 Using the DVD±R/RW DigiCopier as a Stand Alone DVD±R/RW Copier # Connect the power cable to the back of the DVD DigiCopier. # Plug in the Power Cord to the AC Power Source (+90~+250VAC) # Set the switch (S1 on figure 1, page 6) at the back to Duplicator position. Then turn the power on at ...

Page 10 - DVD DigiCopier; DVD; Addonics Technologies –

Chapter 5 Using DVD DigiCopier as an external DVD±R/RW on your PC Installation # Connect the power cable to the back of the DVD DigiCopier. # Plug in the Power Cord to the AC Power Source (+90~+250VAC) # Connect the Interface cable to the back of the DVD DigiCopier and the other end to your computer...

Page 11 - USB 2.0 interface cable

USB 2.0 interface cable # The USB model comes with High Speed USB2.0 cable, which is capable of burning or copying DVD or CD at the maximum speed of the drive. # Since USB 2.0 Hi-Speed is an evolution of the existing USB 1.1 specification, it is fully forward and backward compatible with current USB...

Page 12 - is Plug and Play under Windows XP, and

USB driver installation For Win98 and Win98SE 1. Make sure your computer is up and running. 2. Insert the USB cable to the USB Port. 3. A "New Hardware Found" message shall pops up. 4. Follow the ON SCREEN wizard and point to the location of A:\USBWIN98 for the driver. 5. Let Windows finish ...

Page 14 - Serial ATA Cable Installation; Attach the USB-IDE cable’s “; MC 36 Connector; ” to your Addonics

Serial ATA Cable Installation Attach the USB-IDE cable’s “ MC 36 Connector ” to your Addonics Mobile Drive firm and securely – you should not be able to disconnect the cable without pressing the release notch. Serial ATA Combo Hard Drive Installation For Win98SE, Me, 2000 and XP Note: There no drive...

Page 16 - To listen or Play audio CD’s through the computer,; you may; Optional accessories; for a list of dealer to purchase these

Chapter 7 Playing Audio CDs You can use the Addonics DVD DigiCopier drive to play regular music CDs. • Place the audio disc onto the bottom DVD±R/RW drive • To listen or Play audio CD’s through the computer, you may download the newer version of windows media player (make sure you set the unit to op...

Page 17 - FREE Software Drivers for all Addonics Technologies; Contact Information; Please visit our web site

Technical Support If you need assistance to get your unit functioning properly, please call Addonics Technical Support. Our technical staff will be happy to assist you, but they will need your help to do so. Calling the technical support staff without all the proper information can be both time cons...