Addonics Technologies R14HPCCES - Manual

Addonics Technologies R14HPCCES

Addonics Technologies R14HPCCES – Manual, read for free online in PDF format. We hope this helps you resolve any issues you may have. If you have further questions, please contact us through the contact form.

1 Page 1
2 Page 2
3 Page 3
4 Page 4
5 Page 5
6 Page 6
7 Page 7
8 Page 8
Page: / 8

Table of Contents:

  • Page 2 – Unpacking and Overview
  • Page 3 – Cipher Chain Module; Port Multiplier Compatibility
  • Page 4 – Installation; Port Multiplier Modes
  • Page 6 – Notes about Spare Drives
  • Page 8 – CONTACT US
Loading the manual

www.addonics.com

Technical Support

If you need any assistance to get your unit functioning properly, please have your

product information ready and contact Addonics Technical Support at:

Hours: 8:30 am - 6:00 pm PST

Phone: 408-453-6212

Email: http://www.addonics.com/support/query/

v6.1.11

T E C H N O L O G I E S

User Guide

1U RAID Rack with HPM,

AES 256-bit encryption

(R14HPCCES)

"Loading the manual" means you need to wait until the file loads and becomes available for online reading. Some manuals are very large, and the time they take to appear depends on your internet speed.

Summary

Page 2 - Unpacking and Overview

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Unpacking and Overview WARNING: Please remember to set the power supply to your local outlet voltage prior to plugging in the power cord. Failure to do so may damage the power supp...

Page 3 - Cipher Chain Module; Port Multiplier Compatibility

www.addonics.com Technical Support (M-F 8:30am - 6:00pm PST) Phone: 408-453-6212 Email: www.addonics.com/support/query/ Cipher Chain Module The Cipher hardware in the R14CCES is activated by either powering up the unit or pressing the Cipher Reset button with the Cipher Key inserted. Without activat...

Page 4 - Installation; Port Multiplier Modes

Installation (RAID) The Cipher hardware prevents the use of software to configure or manage the Port Multiplier. Configuring a RAID mode must be done using the dipswitches and SET button on the port multiplier itself, located inside the unit at the rear of the chassis. Installation 1. Use the provid...

Other Addonics Technologies Models

All Addonics Technologies Other