AcuRite 1605 - Manuals

AcuRite 1605 – Manual in PDF format online.

Manuals:

Manual

Manual AcuRite 1605

Summary

Page 2 - Unpacking Instructions; product. Locate the tab and peel off to remove.; Package Contents; Sensor mounting bracket; PRODUCT REGISTRATION; Register online; AcuRite; IMPORTANT; PRODUCT MUST BE REGISTERED

2 Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab ...

Page 3 - Mounting Hardware; Includes anchors and screws.; Qty Diameter Length; ID code that must match display’s

3 Features & Benefits 4 1 2 3 6 5 3-in-1 SENSOR 1. Temperature & Humidity Sensors (internal) 2. Release Lever for Battery Access3. Mounting Point4. Wind Speed Anemometer 5. Mounting Hardware Includes anchors and screws. Qty Diameter Length 4 #4 1” 1 #6 or #8 1/4” or 3/8” 6. Mounting Bracket7...

Page 4 - DISPLAY UNIT

4 AUTO DIM TIME ZONE AUTO DST ONOFF wind chill heat index d w ew point hil auto MPH KPH manual Learning... high indoor humidity! low indoor h r umidity! h h i i gh h high low high low h h i i gh h low O C T low 12-24 hour forecast barometer current W I N D average peak 13 14 15 16 18 21 Features &am...

Page 5 - BACK OF DISPLAY UNIT

5 Features & Benefits 1 2 3 8 7 4 5 9 6 BACK OF DISPLAY UNIT 1. Button for setup preferences. 2. Button for setup preferences. 3. Button for setup preferences. 4. Button Press to access all-time high and low records. 5. Battery Compartment6. Plug-in for Power Adapter7. A-B-C Switch ID code that ...

Page 6 - SETUP; Install or Replace Batteries; A B C

6 SETUP Set the A-B-C Switch The A-B-C switch is located inside the battery compartment. It can be set to A, B or C. However, you must select the same letter choices for both the sensor and the display unit in order for the units to synchronize. Install or Replace Batteries AcuRite recommends high q...

Page 7 - WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS.; Display Unit Setup; A B C

7 Set the A-B-C Switch Locate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B or C. You must select the same letter choices for both the display unit and the sensor in order for the units to synchronize. Install or Replace Backup Batteries (optional) 1. Remove the batte...

Page 8 - Display Backlight Settings; NOVEMBER 5 - MARCH 10

8 Set the Time, Date & Units Press the “ ” button, located on the front of the display unit, to enter SET MODE. Once in set mode, the preference you are currently setting will blink on the display.To adjust the currently selected (flashing) item, press and release the “ “ or “ “ buttons (press a...

Page 9 - Visit us online to view installation photos and

9 Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and ...

Page 10 - Basic Setup is Complete; Top Mount

10 3-in-1 Sensor Installation Guidelines INSTALLATION HEIGHT Mount the sensor at least 5 feet (1.5 meters) off the ground (higher is better for wind measurement) in an open area. Secure to fence post, 2”x4” wood, 3/4” pole, etc. (not included) LEVEL INSTALLATION Use a bubble level (not included) to ...

Page 11 - OPERATION; superior weather prediction.; Weather Forecast; recorded from the past 60 minutes.

11 OPERATION Using The Weather CenterLearning Mode Self-Calibrating Forecasting use a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this point, the sel...

Page 13 - Troubleshooting

13 Troubleshooting Problem Possible Solution No outdoor sensor reception no bars • Relocate the display unit and/or the 3-in-1 sensor. The units must be within 330 ft (100 m) of each other. • Make sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the wir...

Page 14 - If your AcuRite product does not operate properly after trying

14 Problem Possible Solution Inaccurate temperature or humidity • Make sure both the display unit and 3-in-1 sensor are placed away from any heat sources or vents (see page 9). • Make sure both units are positioned away from moisture sources (see page 9). • Make sure 3-in-1 sensor is mounted at leas...

Page 15 - Display Unit Care; Clean the Sensor; instructions prior to use.; Snow & Freezing Weather; The 3-in-1 sensor will not be damaged by freezing conditions.; Clean the Wind Anemometer; Calibration

15 Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. 3-in-1 Sensor Care Clean the Sensor Clean with a soft, damp cloth. Do not use caus...

Page 16 - Clock Battery

16 *To change from AUTO to MANUAL pressure mode and vice versa, press AND HOLD the “ ” button for at least 10 seconds. The display indicates the current pressure mode selected,“AUTO” or “MANUAL”. After 20 seconds of inactivity, the display will save the adjustments and exit calibration mode. Note: C...

Page 17 - 30 ft / 100 m depending on home construction materials

17 FCC Information This device complies with part 15 of FCC rules. Operation is subject to the following two conditions:1- This device may NOT cause harmful interference, and2- This device must accept any interference received, including interference that may cause undesired operation.WARNING: Chang...

Page 18 - Limited One Year Warranty; Customer Support

18 At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. We recomm...

Page 20 - It’s more than accurate, it’s; designed to provide you with information you can depend on to

©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology. Visit www.AcuRite.com/patents for details. Printed in ...