AcuRite 1086 - Manuals - manualsarea.com

Page 2 - Unpacking Instructions; Package Contents; PRODUCT REGISTRATION; Register online; AcuRite; IMPORTANT; OUTDOOR SENSOR; Integrated Hanger; Battery Compartment Cover

2 Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab ...

Page 3 - BACK OF DISPLAY UNIT

3 17 18 20 19 21 15 16 Features & BenefitsDISPLAY UNIT FRONT 2 3 1 4 56 7 8 RESET 30 26 2728 29 9 11 12 13 14 25 23 24 22 BACK OF DISPLAY UNIT 10

Page 5 - SETUP; Install or Replace Batteries; Sensor Setup; A B C

5 SETUP Set the A-B-C Switch The A-B-C switch is located inside the battery compartment. It can be set to A, B or C. However, you must select the same letter choices for both the sensor and the display unit in order for the units to synchronize. Install or Replace Batteries AcuRite recommends high q...

Page 6 - Display Unit Setup; Install or Replace Backup

6 RESET PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS. BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used f...

Page 7 - Clock

7 Intelli-Time ® Clock Intelli-Time products are pre-programmed with the correct time and date. All you need to do is select your Time Zone and Daylight Saving Time preferences. The clock will then automatically updates for Daylight Saving Time. Set the Time, Date & Units Press and HOLD the “ ” ...

Page 8 - AT

8 Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt ...

Page 9 - Weather Forecast; Barometric Pressure; Humidity Level Icon; OPERATION

9 Using the Weather StationLearning Mode Self-Calibrating Forecasting uses a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this point, the self-calibra...

Page 10 - Troubleshooting

10 Troubleshooting Problem Possible Solution No outdoor sensor reception no bars If the wireless signal indicator shows no bars:• Relocate the display unit and/or the outdoor sensor. The units must be within 330 ft (100 m) of each other. • Make sure both units are placed at least 3 feet (.9 m) away ...

Page 11 - If your AcuRite product does not operate properly after trying; Troubleshooting - Continued

11 If your AcuRite product does not operate properly after trying the troubleshooting steps, visit www.AcuRite.com or call (877) 221-1252 for assistance. Troubleshooting - Continued Problem Possible Solution Display screen not working • Check that the batteries are installed correctly. Batteries may...

Page 12 - Replace Intelli-Time Clock Battery

12 Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Outdoor Sensor Care Clean with a soft damp cloth. Do not use caustic cleaners or a...

Page 13 - FCC Information

13 TEMPERATURE RANGE Outdoor: -40 º F to 158 º F; -40 º C to 70 º C Indoor: 32 º F to 122 º F; 0 º C to 50 º C HUMIdITy RANGE Outdoor: 1% to 99% RHIndoor: 1% to 99% RH WIRELESS RANGE 330 ft / 100 m depending on home construction materials OPERATING FREQUENCy 433 MHz POWER Display: 3 x AA alkaline ba...

Page 14 - Limited One Year Warranty; Customer Support; For assistance

14 At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. We recomm...

Page 16 - It’s more than accurate, it’s; designed to provide you with information you can depend on to

©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copy-rights are the property of their respective owners. AcuRite uses patented technology. Visit www.AcuRite.com/patents for details. Printed in...