AcuRite 1010 - Manuals

AcuRite 1010 – Manual in PDF format online.

Manuals:

Manual

Manual AcuRite 1010

Summary

Page 2 - Unpacking Instructions; PRODUCT REGISTRATION; Register online; AcuRite; IMPORTANT

2 Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab ...

Page 4 - Display Unit

4 Features & Benefits Display Unit 10 37 11 12 9 28 29 31 33 30 32 1 3 4 5 7 8 6 2 19 20 21 22 23 25 26 27 24 36 34 13 14 16 15 17 18 35

Page 6 - Back of Display Unit; BACK OF DISPLAY UNIT

6 Back of Display Unit BACK OF DISPLAY UNIT 1. A-B-C Switch ID code that must match 5-in-1 sensor’s A-B-C switch to ensure units synchronize. 2. Clear Today Clears data recorded since 12:00am. 3. Reset Full reset to factory defaults. 4. Clear All Clears all data recorded without having to reset time...

Page 7 - SETUP; Install or Replace Batteries

7 A B C SETUP 5-in-1 Sensor Setup 1 A-B-C Switch Set to match display unit 2 Install Batteries 4 AA Batteries 3 Rain Gauge Stabilizer Remove and discard Set the A-B-C Switch Locate the A-B-C switch inside the battery compartment. Set the A-B-C switch to A, B or C. You must select the same letter cho...

Page 8 - Display Unit Setup

8 Set the A-B-C Switch The A-B-C switch is located inside the battery compartment. It can be set to A, B or C. However, you must select the same letter choices for both the sensor and the display unit in order for the units to synchronize. Install or Replace Batteries Insert 3 x AA alkaline batterie...

Page 10 - Select Measurement Units

10 Select Measurement Units To select between standard units (mph, ºF, etc.) or metric units (kph, ºC, etc.):1. Press the “ ▲ ” or “ ▼ ” buttons until “SET UNITS?” is displayed on the Selectable Category part of the display unit. 2. Press the “SET” button to set the unit preference. 3. Press the “ ▲...

Page 11 - Visit us online to view installation photos and; View Video

11 Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt and...

Page 12 - solar cell facing SOUTH.; Clear Data Collected During Installation; Basic Setup is Complete; SOUTH; NO OBSTRUCTIONS

12 5-in-1 Sensor Installation Guidelines INSTALLATION HEIGHT Mount the sensor at least 5 feet (1.5 meters) off the ground (higher is better for wind measurement) in an open area. Secure to fence post, 2”x 4” wood, 3/4” pole, etc. (not included) LEVEL INSTALLATION Use the bubble level (included on to...

Page 13 - OPERATION; ready for superior weather prediction.; Weather Forecast; personalized for your exact location.; Weather Select; change in pressure so you can monitor the rate of change over time.; Rainfall Event

13 OPERATION Using the Professional Weather CenterLearning Mode Self-Calibrating Forecasting use a unique algorithm to analyze changes in pressure over a time period (called Learning Mode) to determine your altitude. After 14 days, the Learning Mode icon disappears from the display screen. At this p...

Page 14 - Programmable Weather Alarms

14 Programmable Weather Alarms Each Selectable Weather Category features an alarm option. When an alarm sounds, the display unit emits an audible beep and flashes the affected category, its alarm settings, and any other relevant data. Some alarms can be customized to alert you when your programmed v...

Page 15 - Set a Weather Alarm

15 To activate or deactivate an alarm: Press “ ” To set or adjust an alarm value: Press and hold “ ” Set a Weather Alarm 1. Choose the weather category for which you wish to set an alarm by pressing the “ ▲ ” or “ ▼ ” buttons until the category is displayed on the Selectable Category part of the dis...

Page 16 - Troubleshooting

16 Problem Possible Solution No outdoor sensor reception no bars • Relocate the display unit and/or the 5-in-1 sensor. The units must be within 330 ft (100 m) of each other. • Make sure both units are placed at least 3 feet (.9 m) away from electronics that may interfere with the wireless communicat...

Page 17 - If your AcuRite product does not operate properly after trying

17 Problem Possible Solution Inaccurate temperature or humidity • Make sure both the display unit and sensor are placed away from heat sources or vents (see p.11). • Make sure both units are positioned away from moisture sources (see p.11). • Make sure sensor is mounted at least 5 ft off the ground....

Page 18 - Display Unit Care; Clean the Sensor

18 Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. 5-in-1 Sensor Care Clean the Sensor Clean with a soft damp cloth. Do not use caust...

Page 19 - Calibrate the Rain Gauge; Tips

19 3. Press the ” ▲ “ and ” ▼ “ buttons to calibrate the data value higher or lower from the actual reading. 4. Press the “SET” button to confirm the calibration adjustment. Note: The “CAL” icon remains illuminated next to calibrated values. Calibrate the Rain Gauge The rain gauge on the 5-in-1 sens...

Page 21 - Limited One Year Warranty; Customer Support; For assistance

21 At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. We recomm...

Page 24 - It’s More than Accurate, it’s; designed to provide you with information you can depend on to

©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copy-rights are the property of their respective owners. AcuRite uses patented technology. Visit www.AcuRite.com/patents for details. Printed in...