AcuRite 01502BPDI - Manuals

Page 2 - Unpacking Instructions; Package Contents; AcuRite; Register online; PRODUCT REGISTRATION; IMPORTANT

10 9 Features & Benefits 3 2 Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to usin...

Page 4 - Display Unit Setup; SETUP; Install or Replace Batteries

A B C Rain Gauge Stabilizer Remove and discard 2 3 A-B-C Switch set to match display unit 1 Install Batteries 4 AA batteries A B C 7 6 5-in-1 Sensor Setup Display Unit Setup SETUP PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND R...

Page 5 - Select Measurement Units

9 8 Set the Time & Date The clock and calendar are utilized to time stamp history records and other data, so it is important to set the time and date soon after you power on the display unit. Set the Date 1. Press the up or down arrow buttons until “SET DATE?” is displayed on the Selectable Cate...

Page 6 - Visit us online to view installation photos and; SOUTH; Display Unit Placement; View Video; Clear Data Collected During Installation; Basic Setup is Complete

Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and the sensor are critical to the accuracy and performance of this product. Important Placement Guidelines Display unit and sensor must be within 330ft (10...

Page 7 - Silence a Sounding Alarm; “Learning Mode”; OPERATION; Set a Weather Alarm

13 12 Silence a Sounding Alarm The alarm sounds initially for a few minutes, then silences itself. The alarm then sounds every few minutes afterwards until one of the following happens:1. “SNOOZE” - Press any button. Alarm silences, but sounds again if the alarm condition reoccurs. 2. Turn the alarm...

Page 8 - Troubleshooting; If your AcuRite product does not operate properly after trying

15 14 Problem Possible Solution No outdoor sensor reception no bars • Relocate the display unit and/or the 5-in-1 sensor. The units must be within 330ft (100m) of each other. • Make sure both units are placed at least 3 feet (.9m) away from electronics that may interfere with the wireless communicat...

Page 9 - Calibrate the Rain Gauge

17 16 2. Press AND HOLD the up and down arrow buttons and the “ ” button all at the same time for 15-20 seconds. • The display unit beeps, and all display data is hidden except for the value being calibrated. • “CAL” (calibrate) and arrows appear next to the value being calibrated. 3. Press the up o...

Page 10 - Specifications; Limited One Year Warranty; For assistance; FCC Information

19 18 Specifications TEMPERATURE RANGE HUMIDITY RANGE WIND SPEEDWIND DIRECTION INDICATORSRAINFALLWIRELESS RANGEOPERATING FREQUENCYPOWERDATA REPORTING Outdoor: -40ºF to 158ºF; -40ºC to 70ºCIndoor: 32ºF to 122ºF; 0ºC to 50ºCOutdoor: 1% to 99%Indoor: 16% to 98%0 to 99 mph; 0 to 159 kph16 points 0 to 99...