AcuRite 00774W - Manuals - manualsarea.com

Page 2 - Unpacking Instructions; Package Contents; PRODUCT REGISTRATION; Register online; AcuRite; IMPORTANT; OUTDOOR SENSOR; Integrated Hanger; Battery Compartment Cover

2 Congratulations on your new AcuRite product. To ensure the best possible product performance, please read this manual in its entirety and retain it for future reference. Unpacking Instructions Remove the protective film that is applied to the LCD screen prior to using this product. Locate the tab ...

Page 3 - DISPLAY UNIT

3 Features & Benefits DISPLAY UNIT 1. Current Outdoor Temperature Arrow icon indicates the direction the temperature is trending. 2. Outdoor Sensor Signal Strength 3. Daylight Saving Time Indicator Shown only during setup. 4. Display Low Battery Indicator 5. Day of the Week 6. Current Indoor Tem...

Page 4 - SETUP; Install or Replace Batteries; Sensor Setup; A B C

4 SETUP Set the A-B-C Switch The A-B-C switch is located inside the battery compartment. It can be set to A, B or C. However, you must select the same letter choices for both the sensor and the display unit in order for the units to synchronize. Install or Replace Batteries AcuRite recommends high q...

Page 5 - Display Unit Setup

5 PLEASE DISPOSE OF OLD OR DEFECTIVE BATTERIES IN AN ENVIRONMENTALLY SAFE WAY AND IN ACCORDANCE WITH YOUR LOCAL LAWS AND REGULATIONS. BATTERY SAFETY: Clean the battery contacts and also those of the device prior to battery installation. Remove batteries from equipment which is not to be used for an ...

Page 6 - Clock

6 Intelli-Time ® Clock Intelli-Time products are pre-programmed with the correct time and date. All you need to do is select your Time Zone and Daylight Saving Time preferences. The clock will then automatically update for Daylight Saving Time. Set the Time, Date & Units Press the “SET” button, ...

Page 7 - AT

7 Placement for Maximum Accuracy AcuRite sensors are sensitive to surrounding environmental conditions. Proper placement of both the display unit and outdoor sensor are critical to the accuracy and performance of this product. Display Unit Placement Place the display unit in a dry area free of dirt ...

Page 8 - OPERATION

8 Using the ThermometerHigh/Low Records Today’s high and low values are recorded for indoor and outdoor temperature. The high and low records automatically clear at 12:00am.To view the LOW temperature record, press and release the “ ▼ ” button. The “MIN” icon appears on the display next to the low r...

Page 9 - Troubleshooting; If your AcuRite product does not operate properly after trying

9 Troubleshooting No outdoor sensor reception no bars If the wireless signal indicator shows no bars:• Relocate the display unit and/or the outdoor sensor. The units must be within 330 ft (100 m) of each other. • Make sure both units are placed at least 3 feet (.9 m) away from electronics that may i...

Page 10 - Specifications; FCC Information

10 Care & Maintenance Display Unit Care Clean with a soft, damp cloth. Do not use caustic cleaners or abrasives. Keep away from dust, dirt and moisture. Clean ventilation ports regularly with a gentle puff of air. Outdoor Sensor Care Clean with a soft damp cloth. Do not use caustic cleaners or a...

Page 11 - Limited One Year Warranty; Customer Support; For assistance

11 At AcuRite, we proudly uphold our commitment to quality technology. Chaney Instrument Co. warrants that all products it manufactures to be of good material and workmanship, and to be free of defects when properly installed and operated for a period of one year from the date of purchase. We recomm...

Page 12 - It’s more than accurate, it’s; designed to provide you with information you can depend on to

©Chaney Instrument Co. All rights reserved. AcuRite is a registered trademark of the Chaney Instrument Co., Lake Geneva, WI 53147. All other trademarks and copyrights are the property of their respective owners. AcuRite uses patented technology. Visit www.AcuRite.com/patents for details. Printed in ...