Page 2 - Disposal instructions
Disposal instructions Do not throw this electronic device into the trash when discarding. To minimize pollution and ensure utmost protection of the global environment, please re- cycle it. USA For electronic products containing an LCD/CRT monitor or display, or a super high pressure mercury lamp: La...
Page 3 - Table of Contents
1 ... English Table of Contents Table of Contents ......................................................................................... 1Usage Notice ................................................................................................ 2 Precautions ......................................
Page 4 - Usage Notice; Precautions
2 English ... Usage Notice Precautions Follow all warnings, precautions and maintenance as recommended in this user’s guide to maximize the life of your unit. Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. Warning- To reduce the risk of fi re ...
Page 6 - Product Features
4 English ... Product Features This product is an XGA(XD1250/XD1250D)/ SVGA(XD1150/XD1150D) single chip 0.55” DLP ® projec- tor. Outstanding features include: True XGA, 1024 x 768 addressable pixels (for XD1250/ XD1250D) True SVGA, 800 x 600 addressable pixels (for XD1150/ XD1150D) Single chip D...
Page 7 - Package Overview; This projector comes with all the items shown below.
5 ... English Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if anything is missing. Power Cord 1.8m VGA Cable 1.8m Composite Video Cable 2.0m Projector with lens cap Remote Control 2 x Battery Carrying ...
Page 8 - Main Unit; Product Overview
6 English ... Two remote control receiver provided at front panel and front-top cover. Main Unit Product Overview 1. Focus Ring 2. Zoom Ring 3. Remote Control Receivers 4. Zoom Lens 5. Elevator Foot 6. Elevator Button 7. Power Socket 8. Connection Ports 9. Control Panel 2 7 3 3 4 5 1 6 9 8
Page 9 - Control Panel
7 ... English Control Panel 1. Temp Indicator LED 2. Lamp Indicator LED 3. Power and Indicator LED (Power LED) 4. Source 5. Resync 6. Menu 7. Four Directional Select Keys 5 1 3 2 4 6 7
Page 10 - Connection Ports
8 English ... Connection Ports 1. DVI Input Connector (for Digital signal with HDCP function) (*) 2. VGA Input Connector (PC Analog Signal/HDTV/Component Video) 3. Audio Input Connector (*) 4. S-Video Input Connector 5. Composite Video Input Connector 6. Monitor Loop-through Output Connector (VGA-Ou...
Page 11 - Remote Control
9 ... English 1. Power 2. Resync 3. Source 4. Freeze 5. Hide 6. Aspect Ratio 7. Mute (*) 8. Four Directional Select Keys 9. Back 10. Keystone +/- 11. Menu 12. Volume +/- (*) 13. Page Up/Page Down Remote Control 14. Empowering Key 15. VGA 16. S-Video 17. Component Video 18. Composite Video 19. DVI (*...
Page 12 - Installation; Connecting the Projector
Installation 10 English ... Connecting the Projector 1. ....................................................................................................................Power Cord 2. ................................................................................ DVI Cable (Optional Accessory) 3....
Page 13 - Powering On/Off the Projector; Powering On the Projector; red; blue
Installation 11 ... English Powering On/Off the Projector Power Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securely connected. The Power LED will fl ash red . 3. Turn on the lamp by pressing “Power” button on the control panel. And the Pow...
Page 14 - Warning Indicator; Powering Off the Projector; red fl ash
Installation 12 English ... Warning Indicator When the “ LAMP ” indicator lights solid red, the projector will automatically shut itself down. Please contact your local reseller or service center. When the “ TEMP ” indicator lights solid red for about 20 sec- onds, it indicates the projector has...
Page 15 - Adjusting the Projected Image; Adjusting the Projector Image Height; The projector is equipped with an elevator foot for ad-
Installation 13 ... English Adjusting the Projected Image Adjusting the Projector Image Height The projector is equipped with an elevator foot for ad- justing the image height. To raise the image: 1. Press the elevator button . 2. Raise the image to the desired height angle , then re- lease the ...
Page 16 - Adjusting the Projector Zoom / Focus; Adjusting Projection Image Size
Installation 14 English ... This graph is for user’s reference only. Screen (Diagonal) Max. 25.41”(64.5cm) 76.23”(193.6cm) 127.05”(322.7cm) 177.87”(451.8cm) 254.10”(645.4cm) 304.93”(774.5cm) Min. 23.10”(58.7cm) 69.33”(176.1cm) 115.55”(293.5cm) 161.78”(410.9cm) 231.11”(587.0cm) 277.33”(704.4cm) Scr...
Page 17 - User Controls; Control Panel & Remote Control; There are two ways for you to control the functions: Re-; Using the Control Panel
User Controls 15 ... English Control Panel & Remote Control There are two ways for you to control the functions: Re- mote Control and Control Panel. Control Panel Using the Control Panel Power Refer to the “Power On/Off the Projector” section on pages 11-12. Resync Automatically synchronizes...
Page 18 - Using the Remote Control
User Controls 16 English ... Using the Remote Control Power Refer to the “Power On/Off the Projector” section on pages 11-12 Resync Automatically synchronizes the projector to the input source. Source Press “Source” to choose RGB, Component-p, Component-i, S-Video, Composite Video and HDTV sou...
Page 19 - Empowering Key; Volume
User Controls 17 ... English Empowering Key Acer Empowering Key provides three Acer unique functions, they are “Acer eView Management”, “Acer eTimer Management” and “Acer eOpening Management” respectively. Press “e” key for more than one second to launch the on screen display main menu to modify its...
Page 20 - VGA; Composite Video; DVI; Language
User Controls 18 English ... VGA Press “VGA” to change source to VGA-In connector. This con- nector supports Analog RGB, YPbPr (480p/576p/720p/1080i), YCbCr (480i/576i) and RGBsync. Component Video Press “Component” to change source to component Video source. This source supports YPbPr (480p/576...
Page 21 - On Screen Display Menus; The Projector has multilingual On Screen Display menus; How to operate
User Controls 19 ... English On Screen Display Menus Main Menu Sub Menu Settings The Projector has multilingual On Screen Display menus that allow you to make image adjustments and change a variety of settings. The projector will automatically detect the source. How to operate 1. To open the OSD men...
Page 22 - Color; Display Mode
User Controls 20 English ... Color (Computer / Video Mode) Display Mode There are many factory presets optimized for various types of images. Bright : For brightness optimization. PC : For computer or notebook. Video : For playing video in a bright environment. Theater : For Home Theatre usa...
Page 24 - Image; Keystone
User Controls 22 English ... Image (Computer / Video Mode) Keystone Adjust image distortion caused by tilting projection. (±16 degrees) Aspect Ratio Use this function to choose your desired aspect ratio. Auto : Keep the image with original width-higth ratio and maxi- mize the image to fit native...
Page 25 - Frequency
User Controls 23 ... English Image (Computer / Video Mode) “H. Position”, “V. Position”, “Frequency” and “ Tracking” func- tions are not supported under DVI and Video mode. “Sharpness” func- tions is not supported under VGA connector source. Rear-Ceiling When you select this function, the proj...
Page 26 - Source Lock; Management
User Controls 24 English ... Auto Shutdown (Minutes) The projector will auto shutdown while there is no signal input after the setting time. Source Lock When source lock is turned off, the projector will search for other signals if the current input signal is lost. When source lock is turned on, it ...
Page 27 - Lamp Hour Elapse
User Controls 25 ... English Acer eOpening Management is a PC utility for user to change the default startup screen of Acer projector to their desired image. You can install Acer eOpening Management from the bundled CD. Connect the projector to your PC with the bundled USB cable then execute Acer eO...
Page 28 - Lamp Hour Reset
User Controls 26 English ... Management (Computer / Video Mode) Lamp Hour Reset Press the button after choosing “Yes ”to turn the lamp hour counter to 0 hours. Security Press to start “Security” setting. You must enter “Administrator Password” first before Security setting. Security This projector p...
Page 32 - Reset
User Controls 30 English ... Management (Computer / Video Mode) Reset Press the button after choosing “Yes” to return the display pa- rameters on all menus to the factory default settings.
Page 33 - Audio
User Controls 31 ... English Audio (Computer / Video Mode) Volume Press the to decrease the volume. Press the to increase the volume. Mute Choose the “On” to turn mute on. Choose the “Off” to turn mute off. Power On/Off Volume Choose this function to adjust volume when power on/off. Alarm Vo...
Page 34 - Timer; Timer Start; Timer Volume; Timer Location
User Controls 32 English ... Timer (Computer / Video Mode) Timer Start Press the to start/stop timer. Timer Period Press the to adjust timer period. Timer Volume (*) Choose this function to adjust volume when timer function is enable and time is up. Timer Display Press the to choose timer display mo...
Page 36 - Appendices; Troubleshooting; If you experience trouble with the projector, refer to the
Appendices 34 English ... Troubleshooting If you experience trouble with the projector, refer to the following information. If the problem persists, please contact your local reseller or service center. Problem: No image appears on screen. Ensure all the cables and power connections are correctly ...
Page 37 - Problem: The screen of the Notebook or PowerBook computer
Appendices 35 ... English 6. Click on “Show all devices”. Then select “Standard monitor types” under the “Manufacturers” box ; choose the resolution mode you need under the “Models” box. 7. Verify that the resolution setting of the monitor display is less than or equal to 1024 x 768 (XD1250/XD1250D)...
Page 38 - Problem: The image is outstretched when displaying; Problem: Lamp burns out or makes a popping sound
Appendices 36 English ... Problem: The image is outstretched when displaying 16:9 DVD. The projector automatically detects 16:9 DVD and adjusts the aspect ratio by digitizing to full screen with 4:3 default set- ting. If the image is still outstretched, you will also need to adjust the aspect ratio ...
Page 39 - Problem: Message Reminders
Appendices 37 ... English Problem: Message Reminders “Lamp is approaching the end of its useful life in full power opera-tion. Replacement Suggested!” will be shown about 10 seconds when lamp life is going to deplete. “Projector Overheated. Lamp will automatically turn off soon.” will be shown w...
Page 40 - Replacing the lamp; Lamp Changing Procedure:
Appendices 38 English ... Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message “Lamp is approaching the end of its useful life in full power operation. Replacement Suggested!” When you see this message, changing the lamp as soon as possible. Make sure...
Page 41 - Specifi cations
Appendices 39 ... English Specifi cations The specs specifi ed below are subject to change without notice. Regarding the fi nal specs, please refer to Acer announced marketing specs. Light Valve - Single Chip DLP ® Technology by Texas Instruments Lamp - 180W User Replaceable Lamp Number of Pixels - 102...
Page 42 - Compatibility Modes; Mode
Appendices 40 English ... Compatibility Modes Mode Resolution (ANALOG) V.Frequency (Hz) H.Frequency (kHz) VESA VGA 640 x 350 31.5 VESA VGA 640 x 350 85 37.9 VESA VGA 640 x 400 85 37.9 VESA VGA 640 x 480 60 31.5 VESA VGA 640 x 480 72 37.9 VESA VGA 640 x 480 75 37.5 VESA VGA 640 x 480 85 43.3 VESA VGA...
Page 43 - Regulation & safety notices; FCC notice; Notice: Shielded cables; Caution
Appendices 41 ... English Regulation & safety notices This appendix lists the general notices of your Acer Projector. FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide...
Page 44 - Operation conditions; Notice: Canadian users; Remarque à l’intention des utilisateurs canadiens
Appendices 42 English ... Operation conditions This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: 1. this device may not cause harmful interference, and 2. this device must accept any interference received, including interfer- ence that may caus...
Page 45 - Important safety instructions
Appendices 43 ... English Important safety instructions Read these instructions carefully. Save them for future reference. 1. Follow all warnings and instructions marked on the product. 2. Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a...
