Page 2 - Precautions; Recycling information; Special notes on LCD monitors
2 Precautions y The monitor may be damaged if placed too near a source of heat. Be aware of the location of radiators, cookers, open fires, etc. y Do not cover the slots and openings on the back or top of the cabinet, as the monitor requires ventilation. The monitor should be located in a well-venti...
Page 3 - Detaching the monitor
3 Package contents LCD monitor Power cord Audio cable (Optional) VGA cable DVI cable (Optional) User's Guide (CD) Quick Start Guide Installation instructions Assembling the monitor 1. Position the monitor on top of the base. 2. Connect the base into the neck of the monitor along the track. Detaching...
Page 4 - Adjusting the viewing angle; The viewing angle of the monitor ranges from
4 Adjusting the viewing angle The viewing angle of the monitor ranges from -5 – 20 °. NOTES • Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen. • Careful attention is required not to catch your fingers or hands when you change the angle.
Page 6 - Adjusting display settings
6 Adjusting display settings External controls 1 Auto If the OSD is active, press Auto to exit a selection in the OSD. If the OSD is inactive, press Auto and the monitor will automatically optimize the position, focus, and clock of your display. 2/3 </> Minus / Plus If the OSD is active, press...
Page 7 - OSD options; Menu
7 OSD options Please refer to "External controls" on Page 6. To adjust the OSD settings 1. Press the Menu button to open the OSD menu. 2. Use Plus/Minus buttons to toggle between the 10 OSD functions (and also to adjust the controls to desired levels once a function has been selected). 3. Pr...
Page 8 - There are three ways to adjust color:; Warm; (you can adjust the colors red, green and blue to the
8 Color adjustment: There are three ways to adjust color: Warm (reddish white) Cool (bluish white) User (you can adjust the colors red, green and blue to the intensity you desire) Language for Asia: Select the OSD menu language. Select from English, German, Spanish, Simplified Chinese, Traditional C...
Page 9 - Select either; Analog; or; Digital Input; This shows information about the screen.
9 Auto Config: System runs auto-configuration. (Optional) Input signal: Select either Analog Input or Digital Input video. Information: This shows information about the screen. Reset: Resets all settings to default levels. Exit: Exit from OSD.
Page 10 - Troubleshooting; Problem
10 Troubleshooting Problem Possible Solutions Power LED is not ON y Check to see if the power switch is in the ON position. y Ensure that the Power Cord is connected. No picture y Check to see if the power switch is in the ON position. y Ensure that the power cord is connected. y Ensure the video ca...
Page 11 - General specifications; Item
11 General specifications Item Specification LCD panel Display 19-inch flat panel active-matrix TFT LCD Max resolution WXGA+ 1440×900 pixels Pixel pitch 0.284 mm Color 16.7 M Brightness 300 cd/m² (Typical) Contrast ratio 800:1 (Typical) Response time 5ms (Typical) View angle of horizontal 160°(Typic...
