Acer TravelMate 7300 - Manuals
Acer TravelMate 7300 – Manual in PDF format online.
Manuals:
Manual Acer TravelMate 7300
Summary
ii Copyright This is a product of Acer Inc. developed to TI specifications.Acer and the Acer logo are registered trademarks andTravelMate is a trademark of Acer Inc. Texas Instruments,TI and the TI logo are registered trademarks of TexasInstruments Inc. Microsoft, Windows, and the Windows logoare re...
iii About This User’s Guide The following conventions are used in this manual: Notes related to the current topic Warnings about actions that can causedamage. Cautions that help you avoid problems Important reminders. Tips or shortcuts.
Contents v Getting Started ............................................................ 1 Unpacking Your Computer ........................... 1Taking Care of Your Computer ..................... 2 Cleaning ............................................... 3AC Adapter ......................................
Contents vii Floppy Drive Cable ..................................... 65PS/2 Y-Bridge Cable .................................. 66File Transfer Cable ..................................... 67Battery Pack .............................................. 68AC Adapter .........................................
Contents viii FCC Class B Radio Frequency Interference Statement ........................... 120 Index ........................................................................ 121
1 Getting Started 1 Congratulations on your purchase of theTravelMate 7300 series notebook computer.Guaranteed and backed by world-class support,you can be sure of top-notch performance fromyour new computer. This section guides youthrough the first few steps in setting up yourcomputer. Unpacking Yo...
Getting Started 2 Taking Care of Your Computer Your notebook will serve you well if you observethe following guidelines: q Do not expose the notebook to prolongeddirect sunlight, or sources of heat, such as aradiator. q Do not expose the notebook to temperaturesbelow 32ºF (0ºC) or above 122ºF (50ºC)...
Getting Started 3 Cleaning Before cleaning the notebook, always disconnectall power to the computer as follows: 1. Close the display lid to turn the notebook off. 2. Disconnect the AC adapter. 3. Remove the battery pack. To clean the notebook case, use a soft clothmoistened with water. Do not use li...
Getting Started 4 Battery Pack The long-lasting Lithium-Ion rechargeable batterypack provides power to your notebook on the go.Here are some things to keep in mind regardingthe battery pack: q Do not expose the battery pack totemperatures above 122°F (50°C). q Use the battery pack only with the Trav...
Getting Started 5 Powering Up Your Computer Powering up the computer is as easy as 1-2-3: 1. Insert the Battery Pack. Insert the battery pack intothe battery compartmentand slide the batterycompartment cover towardthe rear of the notebookuntil the compartmentcover snaps closed. 2. Connect the AC Ada...
Getting Started 6 Creating Backup and Startup Diskettes Windows 95 prompts you to create backup andstartup diskettes. Note: If your Windows 95 package contains a Windows 95 CD, you do not need to createbackup diskettes for Windows 95. However, youshould still create a Windows 95 startup disk.
Getting Started 7 Using Diskettes Follow these guidelines when using diskettes withyour computer: q Always make backup copies of diskettes thatcontain important data or program files. q Keep diskettes away from magnetic fields andsources of heat. q Avoid removing a diskette from the drivewhen the fl...
Getting Started 8 Travel Tips Here are some tips on preparing your computer fortraveling: 1. Make diskette or tape backup copies ofimportant files on the hard disk. 2. Close the display, making sure the cover latchis secure. 3. Disconnect the AC adapter and all peripherals. 4. Place the notebook, AC...
Getting Started 10 Getting Help This user’s guide provides clear and conciseinformation about your computer, so read itthoroughly. Technical Support Should you ever have a problem with yourTravelMate, or if you think something is notworking properly, call our technical support at(800) 816-2237. Plea...
2 System Tour 11 The Travelmate 7300 combines high-performance,versatility, multimedia capabilities, and anadvanced power management system in a uniqueergonomic and stylish case. Feature Summary The computer is packed with features that make itas easy to work with as it is to look at. Here aresome o...
System Tour 12 Multimedia and Communications q 16-bit stereo audio with built-in FMsynthesizer and 3D sound effect q Built-in microphone and dual angled stereospeakers q Support for simultaneous display on thebuilt-in screen and an external monitor forpresentations q Full-screen, 30 frames per secon...
System Tour 13 Expandability q CardBus PC Card (PCMCIA) slots (two typeII/I or one type III) with Zoomed Video portfunction q Mini-dock option with built-in CardBus slots(two type II/I or one type III) q USB port onboard q Upgradeable memory and hard disk
System Tour 14 Display The computer’s large graphical display offersexcellent viewing, with quality and performanceequal to desktop displays. Note: The computer is available with an active matrix TFT display. Opening and Closing the Display To open the display, slide the display lid latch tothe righ...
System Tour 15 When you close the display lid, the computersaves all data either to the hard disk or tomemory, depending on the When Lid Is Closedsetting (see page 95). When all data is saved, thecomputer turns itself off. When you reopen the lid,the computer retrieves your data and resumeswhere you...
System Tour 17 Keyboard The computer’s full-size keyboard includes lockkeys, an embedded keypad with cursor-controlkeys, Windows 95 keys, twelve function keys thatact as “hot keys” when used in combination withthe special Fn key. The keyboard also includes a built-in touchpadpointing device and a co...
System Tour 18 Tip: When entering a lot of numeric data, toggle on NumLk or attach an external keypad asdescribed on page 61. Key Description Caps Lock When Caps Lock is on, alphabeticalcharacters appear in uppercase as you typethem. Fn+NumLk(Fn+F11) When Num Lock After Boot is enabled in theBIOS se...
System Tour 19 Embedded Keypad The embedded keypad functions like a desktopnumeric keypad. It is marked by small charactersprinted in the upper right corner of the keycaps.(For simplicity, cursor-control symbols are notprinted on the keycaps.) To Use With NumLk On With NumLk Off Numeric keys Use the...
System Tour 20 Windows 95 Keys The computer keyboard contains two keys thatperform Windows 95-specific functions: ÿ and . Key Description ÿ key The same as clicking the Windows 95 Startbutton. Pressing other keys in combination withthe ÿ key performs special functions: ÿ + Tab Activate the next task...
System Tour 21 Hot Keys The computer’s special Fn key, used incombination with other keys, provides “hot-key”combinations that access system controlfunctions, such as screen contrast, brightness,volume output, and the BIOS setup utility. Note: When using hot-key combinations, press and hold the Fn k...
System Tour 24 Eject Menu The Fn+F9 hot-key combination brings up aspecial eject menu that allows you to performseveral system configuration functions. Eject Options: Battery (Suspend-to-disk) ................ Change CD-ROM Disc (Also Fn+1) ................... Eject Mini Dock (Suspend) ................
System Tour 25 Touchpad The ergonomically-positioned touchpad is apointing device that senses movement on itssurface. The pointer moves on the screen inresponse to the movement of your finger on thesurface of the touchpad. q Move your finger across the touchpad to movethe pointer on the screen. q Pr...
System Tour 27 Palm Rest The curved palm rest located below the keyboardprovides a comfortable place to rest your hands asyou type. Tip: The palm rest helps prevent repetitive strain injury to your wrists and fingers.
System Tour 28 Storage The computer provides high-capacity storage on a2.5-inch Enhanced-IDE hard disk. The computeralso contains a bay that accepts removablemodules—a CD-ROM drive, a floppy drive or asecond hard disk option. Hard Disk The hard disk can be upgraded when you needmore storage space. S...
System Tour 29 Ejecting a CD To eject a CD, press Fn+1 or press the eject buttonon the CD-ROM drive, or use your softwareapplication’s CD eject command. (There may be afew seconds delay before the CD is ejected.) Tip: To eject a CD using Windows 95, double- click My Computer, right-click the CD-ROM ...
System Tour 30 1. If the floppy drive module is installed in themodule bay, remove it by following the stepsdescribed in the next section. 2. Open the port cover on the rear of thecomputer, and connect the 25-pin connectorend of the floppy drive cable to the computer’sparallel port. 3. Connect the o...
System Tour 31 q for CD-ROM q for floppy drive q for hard disk q for no module installed or when the computer is detecting the module typeinstalled in the module bay To hot-swap modules, follow these steps: 1. Left-click on the module bay icon on thetaskbar ( ). 2. Click on Remove Device . 3. Click ...
System Tour 33 Audio The computer includes 16-bit stereo audio with abuilt-in FM synthesizer, dual, angled speakers, abuilt-in sensitive microphone, and two audio portson the computer’s left panel for external audiodevices. For information on connecting external audio devices, see page 58. The dual,...
System Tour 34 Audio Control The computer provides several hot keys that allowyou to control audio output: Hot Key Icon Function Description Fn+F7 SpeakerOn/Off Toggles speaker output onand off Fn+Ctrl+ ↑ VolumeUp Increases speaker volume Fn+Ctrl+ ↓ VolumeDown Decreases speaker volume Fn+Ctrl+ → Bal...
System Tour 35 Ports The computer’s ports allow you to connectperipheral devices to your computer just as youwould to a desktop PC. The main ports are foundon the computer’s rear panel. The computer’s leftpanel contains the computer’s multimedia portsand PC card slots. Rear Panel Ports The computer’...
System Tour 38 Left Panel Ports The computer’s left side panel contains thecomputer’s multimedia ports and PC card slots, asshown in the illustration on the next page. 1 PC Card Slots2 Microphone-in/Line-in Port3 Speaker-out/Line-out Port Port Icon Connects to... PC Card slots Two type I/II PC Cards...
System Tour 39 PC Card Slots The computer contains two PC card slots on theleft panel that accommodate two type I/II or onetype III PC card(s). Consult your dealer foravailable PC card options. For information on howto use the PC card slots, see page 56. Multimedia Ports The computer provides a Mic-...
System Tour 40 Security The computer includes both hardware andsoftware features to secure your computer. Ahardware security notch located on the left panelof the computer lets you connect a standard key-based computer security lock. Circle or wrap a computer security lock cablearound an immovable o...
3 Power 41 The computer operates on AC or battery power.This section contains the information you need toknow to operate the computer on battery power.This section also includes information about thecomputer’s unique power management system. Battery Pack The computer uses a single high-capacity Lith...
Power 42 Tips: Whenever possible, use the AC adapter. Thebattery will come in handy when you travel orduring a power failure. It is advisable to have anextra fully-charged battery pack available forbackup. If the computer is to be stored for more than twoweeks, it is best to remove the battery pack....
Power 43 To install the battery pack, simply reverse theprocedure as follows: 1. Insert the battery pack into the batterycompartment. 2. Slide the battery compartment cover latchtoward the rear of the computer until it snapsinto position. Charging the Battery To charge the battery, place the battery...
Power 44 Rapid Charge The computer uses rapid charge when thecomputer is in suspend mode with a powered ACadapter connected. Using rapid charge, a depletedbattery charges fully in approximately two hours. Charge-In-Use The computer uses charge-in-use when thecomputer is in use with a powered AC adap...
Power 45 q With the battery-pack gauge Onscreen Fuel Gauge The onscreen fuel gauge provides a graphicrepresentation and shows the percentage of thepresent battery level. To view the onscreen fuelgauge, press Fn+F6. (If a powered AC adapter isconnected, a plug icon shows in the onscreen fuelgauge.) P...
Power 46 Battery Pack Gauge The battery pack gauge allows you to check thebattery charge level when it is not installed in thecomputer. Simply press the fuel gauge button onthe battery pack. The lights on the fuel gauge show the charge levelas follows: Lights (LEDs) Lit Charge Level lllll 100% llll¡...
Power 47 q Set the When Lid is Closed parameter toSuspend to Disk. See page 95. q Use the AC adapter whenever possible,reserving the battery for on-the-go computing. q Keep the battery pack in the computer whenthe computer is powered by the AC adapter. Aconstant trickle charge maintains the batteryl...
Power 48 q The fuel gauge (accessed via Fn+F6) turnsred. When a low-battery warning occurs, you haveabout fifteen minutes of power left. If you do notconnect the AC adapter or install a backup batterypack within fifteen minutes, the computer savesyour data and shuts down. The computer will save your...
Power 50 Advanced PowerManagement The computer supports the Advanced PowerManagement (APM) standard defined by Microsoftand Intel. Tip: Advanced Power Management greatly prolongs battery life. Use APM whenever possible. To use Advanced Power Management, follow thesesteps: 1. Click the Start button a...
Power 51 Heuristic Power Management The computer uses a new power managementtechnique called Heuristic Power Management(HPM) to take advantage of APM’s power-savingfeatures without degrading performance. HPMallows the computer to provide maximum powerconservation and maximum performance. Power-manag...
Power 52 q Suspend to Disk q Suspend to Memory Note: If an external monitor is connected to the computer, the computer does not enter eithersuspend mode when you close the display. Toenter suspend mode, disconnect the externalmonitor, and then open and reclose the display. Suspend to Disk Upon enter...
Power 53 Caution: If the battery runs out of powerwhile the AC adapter is not connected, thecomputer enters suspend-to-disk mode,regardless of the When Lid Is Closed setting. The computer exits suspend-to-disk mode andreturns to normal mode when you open thedisplay. (Make sure a charged battery pack...
Power 54 Note: The computer also enters suspend-to- memory mode whenever an attempt to suspend todisk fails—for example, if the suspend-to-disk fileis absent or invalid. When the computer enters suspend-to-memorymode, the power indicator ( ) flashes. The computer exits suspend-to-memory mode andretu...
4 Peripherals and Options 55 The computer provides excellent connectivity andexpansion capabilities. This section describes howto connect peripherals and hardware options tothe computer and how to upgrade your computer.(For a complete list of available options andupgrades, consult your dealer.) Prin...
Peripherals and Options 56 PC Cards Credit-card-sized PC cards (PCMCIA cards)enhance the usability and expandability of yourcomputer. The computer provides two type I/II PCCard slots (or one type III slot) on the computer’sleft side panel. Common type II cards include flashmemory, SRAM, fax/data mod...
Peripherals and Options 58 Audio Devices You can connect audio devices to the line-in ( ) and line-out ( ) ports on the computer’s left panel. Use the line-in port to connect a 3.5-mmmini-jack microphone or other line-in device. Usethe line-out port to connect external amplifiedspeakers or headphone...
Peripherals and Options 59 External Monitor You can connect an external monitor to the CRTport ( ) on the computer’s rear panel. See your monitor manual for any additional instructions. With an external monitor connected to thecomputer, you can display your data on theexternal monitor, the built-in ...
Peripherals and Options 60 External Keyboard You can connect any PS/2-compatible keyboard tothe computer. Simply plug the external keyboardinto the PS/2 connector ( ) on the computer’s rear panel. Tip: To connect two devices to the PS/2 port, such as an external keyboard and a mouse, use aPS/2 Y-bri...
Peripherals and Options 61 External Keypad You can connect any PS/2-compatible numerickeypad to the computer. Simply plug the keypadinto the PS/2 connector ( ) on the computer’s rear panel.
Peripherals and Options 62 External Pointing Device You can connect a serial or PS/2-compatiblemouse or similar pointing device to the computer.To connect a serial pointing device, plug the deviceinto the serial port ( ) on the computer’s rear panel. Note: To enable the serial mouse, use the Add New...
Peripherals and Options 63 USB Devices You can connect a USB (Universal Serial Bus)peripheral device to your computer. Thisperipheral standard allows you to connect USBdevices to your computer without using up yoursystem resources. Most USB devices have a built-in USB port ontothemselves which allow...
Peripherals and Options 64 Mini Dock The mini dock allows you to connect yourcomputer to various peripherals, and includes twoadditional CardBus slots. Consult your dealer fordetails. For connection instructions, see the guideincluded with the mini dock.
Peripherals and Options 65 Floppy Drive Cable The floppy drive cable allows you to use yourfloppy drive module externally. To connect thecable, open the computer’s rear port cover andconnect the 25-pin connector end of the floppydrive cable to the computer’s parallel port ( ).Then connect the other ...
Peripherals and Options 67 File Transfer Cable You can use the file transfer cable to transfer databetween the computer and other computers.Connect one end of the file transfer cable to theparallel port ( ) on the computer’s rear panel, andconnect the other end to the other computer’sparallel port. ...
Peripherals and Options 69 Memory Upgrades Memory is upgradeable up to 128 MB, employing64-bit soDIMMs (small outline Dual Inline MemoryModules) in 8, 16, 32 and 64 MB configurations.The following table lists the possible memoryconfigurations. Slot 1 Slot 2 Total Memory 16 MB 16 MB 32 MB 0 MB 32 MB ...
Peripherals and Options 70 Caution: When installing memory, werecommend you seek the help of a qualifiedservice technician. Improper installation candamage the memory module or the computer. Warning! Electronic components can bedamaged by static electricity. To avoiddamage, always wear a wrist groun...
Peripherals and Options 71 4. Remove two screws that secure thememory door and liftthe door up. 5. Insert the memory module diagonallyinto the slot, and thengently press down onthe module until itclicks into place. 6. Replace the memory door and secure it with the screw. 7. Open the display to turn ...
Peripherals and Options 72 Hard Disk Upgrades Larger capacity hard disks are available as anupgrade. The computer uses a 2.5-inch Enhanced-IDE hard disk. The following table shows thecurrently supported hard disks. Consult yourdealer for additional hard disks that may beavailable. Vendor Model Capac...
Peripherals and Options 73 4. Remove two screws that secure the harddisk door; then pressthe hard disk doorrelease latch and liftthe door up. 5. Lift up (1) and slide out (2) the hard disk. 6. Flip over the hard disk and disconnect thehard disk cable fromthe hard disk. 7. Install the replacement har...
Peripherals and Options 74 to your dealer for details.
5 System Utilities 75 The computer comes pre-loaded with the followingsystem utilities and drivers: q Sleep Manager suspend-to-disk utility q Touchpad driver q Display driver q Audio driver q System core logic driver q File-transfer utility q PC Card slot driver and application Note: Your computer m...
System Utilities 76 Note: Sleep Manager starts and adjusts the space needed for suspend-to-disk modeautomatically every time you start Windows 95.You do not need to access Sleep Manager forroutine use of your computer. Accessing Sleep Manager To access Sleep Manager, click the Windows 95Start button...
System Utilities 77 The Enable Indicator on Taskbar check box allowsyou to choose whether or not a Sleep Managerstatus icon appears on the Windows 95 taskbar.Select this check box to enable the icon; clear thecheck box if you prefer not to see the SleepManager icon on the taskbar. Note: The Sleep Ma...
System Utilities 79 If Sleep Manager cannot find the required space onthe hard disk during the space creation process, itdisplays the message “Not Enough Space forAllocation.” Not Enough Space for Allocation When Sleep Manager creates the space on thehard disk, several situations can cause theappear...
System Utilities 80 q You are using disk compression and theamount of free space on the uncompressedhost drive is less than Sleep Manager needs.Sleep Manager works with most compressionsoftware. However, Sleep Manager can onlycreate reserved space on the uncompressedhost drive. If the free space on ...
System Utilities 81 Minimizing Sleep Manager Click the Minimize button on Sleep Manager’swindow to minimize Sleep Manager and allow it torun in the background. If the Enable Indicator onTaskbar check box is selected, the Sleep Managericon will appear on the taskbar. You can thenrestore the Sleep Man...
System Utilities 83 Uninstalling Sleep Manager Uninstalling Sleep Manager removes the SleepManager utility from your hard disk. Caution: Uninstalling Sleep Manager does notremove the hard disk space reserved forsuspend-to-disk mode. Therefore, you can stilluse the suspend-to-disk feature. However,un...
System Utilities 84 Touchpad Driver The computer’s built-in touchpad works with mostmouse drivers, but the pre-loaded touchpad driverprovides additional functions that work only withthe touchpad. To configure these additional functions, followthese steps: 1. Click the Start button and select Setting...
System Utilities 85 BIOS Setup Utility The computer BIOS setup utility allows you toconfigure the computer and its hardware settings.The computer comes correctly configured, and youdo not need to run the BIOS setup utility to usethe computer. However, you might need to use theBIOS utility if you wan...
System Utilities 86 Press Fn+F2 to access the BIOS setup utility. Youwill see the BIOS Utility main screen shown below. BIOS Utility About My Computer System ConfigurationPower Saving Options System Security Reset to Default Settings ↑↑↓↓ = Move Highlight Bar, ↵ ↵ = Select, Esc = Exit Press ↑ or ↓ t...
System Utilities 88 Item Description PCMCIA Slot 1 Card presence in slot 1 (detected bythe socket service) Parallel Port Parallel port base address and IRQ Serial Port Serial port base address and IRQ IrDA (FIR) Infrared port base address and IRQ Onboard USB USB port if enabled or not AC Adapter Con...
System Utilities 89 Date and Time The current date is in “Day-of-the-week MonthDay, Year” format—for example, [Mon Aug 11,1997]. The current time is in“Hour:Minutes:Seconds” format. The system usesa 24-hour clock—for example, 6:25:50 PM appearsas 18:25:50. Floppy Drives The default setting for Flopp...
System Utilities 90 The Hard Disk 1 entry is used when a CD-ROMdrive module or second IDE drive option isinstalled in the module bay. Num Lock After Boot When set to Enabled, Num Lock After Boot tellsthe computer to turn on Num Lock automaticallyon startup, activating the keyboard’s embeddednumeric ...
System Utilities 91 Fast Boot When set to Enabled, the computer bypasses thememory tests to speed up the boot-up process.The default setting is Disabled. Advanced System Configuration For advanced users, the System Configurationmenu item contains two hidden pages that allowyou to view and configure ...
System Utilities 92 Internal Cache Internal cache refers to cache built into the CPU.When enabled, this setting boosts systemperformance. It is also called CPU cache or L1(level one) cache. The default setting is Enabled. External Cache External cache greatly increases systemperformance by lessening...
System Utilities 93 q Multiple Sectors Read/Write. This parameter enhances hard disk performanceby reading/writing more data at once. Theavailable values are: Auto or Disabled. Thedefault Auto setting allows the system toadjust itself to the optimum read/writesetting. q Advanced PIO Mode. Advanced P...
System Utilities 94 The default values are Enabled, 3F8h and 4. q IrDA (FIR). The IrDA (FIR) parameter can be set to Enabled or Disabled. The Base Addressparameter accepts the following values: 3F8h,2F8h, 3E8h or 2E8h. The IRQ parameteraccepts 3 or 10. The DMA Channelparameter accepts 3, 0 or 1. The...
System Utilities 95 Onboard USB When enabled, you can connect USB devices tothe onboard USB port on the rear of the computer.The default setting is Enabled. Reset PnP Resources The system resources are already properlyconfigured. If resource conflicts arise, you can setthis parameter to Yes to reset...
System Utilities 96 q Suspend to Memory. With this setting, the computer saves all data to memory when youclose the display or press the suspend hot keyFn+Esc ( ). The computer wakes up whenyou reopen the display or press any key. Note: If an external monitor is connected to the computer, the comput...
System Utilities 97 Resume On Modem Rings You can set the computer to resume fromsuspend-to-memory mode upon detection of aspecific number of modem rings, ranging from 1 to7. Enabling this option overrides the suspend-to-disk function. Note: This function is currently unavailable. Resume On Schedule...
System Utilities 98 Important! If a password is currently present, the system prompts you to input the passwordbefore entering the System Security screen. Supervisor and User Passwords The supervisor and user passwords both preventunauthorized access to the computer. When thesepasswords are present,...
System Utilities 99 3. Retype your password and press Enter to verifyyour first entry. After you set a password, the computer sets theSupervisor Password (or User Password)parameter to Present. The next time you boot up,resume from suspend mode, run the BIOS setuputility, or unlock system resources,...
System Utilities 100 With this parameter set to Normal, the floppy drivefunctions normally. When the parameter is set toWrite Protect All Sectors, all write functions to thefloppy drive are disabled, but you can still readfrom a disk in the floppy drive. When theparameter is set to Write Protect Boo...
System Utilities 101 Setting Description A: then C:(default) System boots from the diskette in floppy driveA. If the diskette is missing or a non-systemdiskette, the system boots from hard disk C. C: then A: System boots from hard disk C. If the harddisk is a non-system disk, the system bootsfrom fl...
System Utilities 102 Reset To Default Settings When you select the Reset To Default Settingsfrom the BIOS Utility main screen, a dialog boxappears asking you to confirm that you want toreset all settings to their factory defaults.
Appendix 103 Troubleshooting This section tells how to deal with common systemproblems. Read it before calling a technician if a problemoccurs. Solutions to more serious problems require openingup the system. Do not attempt to open the system byyourself. Contact your dealer or an TravelMate authoriz...
Appendix 108 Startup Error Messages If you receive an error message during system startup, notethe message and take corrective action. The following tablelists the error messages in alphabetical order together withthe recommended course of action. Error Message Corrective Action Disk Boot Failure In...
Appendix 109 Caution: When you reconfigure the computer with the BIOS setup utility, you must restart thesystem for the changes to take effect. To restartthe system during startup, press Ctrl+Alt+Delbefore Windows 95 begins loading. To restart fromWindows 95, click the Start button, and selectShutdo...
Appendix 110 Specifications Item Standard Optional Microprocessor Intel Pentium ® processor with MMX™technology Memory System/Main External cache 32MBDual 64-bit memorybanks 512KB L2 cache(synchronous SRAM) Expandable to 128MBusing 8/16/32/64MBsoDIMMs Flash BIOS 256KB Storage system One 2.5-inch, hi...
Appendix 114 System Memory Map Address Range Definition Function 000000 - 09FFFF 640 KB memory Base memory 0A0000 -0BFFFF 128 KB video RAM Reserved for graphicsdisplay buffer 0C0000 -0CBFFF Video BIOS Video BIOS CC000 - CDFFFCE000 - CFFFF System CardBusMiniDock CardBus 0F0000 - 0FFFFF 64 KB system B...
Appendix 116 Interrupts Interrupt Source Device IRQ 0IRQ 1IRQ 2IRQ 3IRQ 4IRQ 5IRQ 6IRQ 7IRQ 8IRQ 9IRQ 10IRQ 11IRQ 12IRQ 13IRQ 14IRQ 15 System TimerKeyboardCascadeIrDA / 2F8hSerial Port 1 / 3F8hAudioFloppy Disk Controller (FDC)Parallel PortReal Time Clock (RTC)USB/System CardBusReserved for PCMCIA ca...
Appendix 119 g. Replace battery with the same type as the product's battery we recommend. Use of another battery maypresent a risk of fire or explosion. Refer batteryreplacement to a qualified serviceman. 13. Warning! Battery may explode if not handled properly.Do not recharge, disassemble or dispos...
Index 121 A about my computer, 86AC adapter, 3addresses. See base addresses; memory addresses advanced PIO mode, 93advanced power management, 50audio, 32–34, 58 hot keys, 34 B balance, 23, 34base addresses I/O map, 114memory map, 114parallel port, 94serial infrared port, 94serial port, 93 battery ga...
Acer Manuals
- Acer P7280I Manual
- Acer P7280I User Manual
-
Acer V5-571-6499
Manual
-
Acer F2
Manual
-
Acer M3802(G)
Manual
- Acer R300 Manual
- Acer 4330 Manual
- Acer 4330 User Manual
-
Acer C200 Series
Manual
- Acer 3260 Manual
- Acer X3400 Manual
-
Acer PD525P
Manual
-
Acer 5236
Manual
- Acer 7745 Manual
-
Acer 5738Z
Manual
-
Acer Projector
Manual
-
Acer Projector
User Manual
-
Acer V233H
Manual
-
Acer V233H
User Manual
- Acer 2300 Series Manual