Acer T3103- Manuals

Page 2 - TABLE OF CONTENTS; Page

TABLE OF CONTENTS Page NOTICE TO OWNERS AND OPERATORS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 SAFETY TIPS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 INSTALLATION . . . . ....

Page 3 - — NOTES —

Page 4 - NOTICE TO OWNERS AND OPERATORS; OR; A copy of this manual is included with each PRO-9 TENDERIZER

BIRO’s products are designed to process food products safely and efficiently. Unless the oper- ator is properly trained and supervised, however, there is the possibility of a serious injury. It is theresponsibility of the owner to assure that this machine is used properly and safely, strictly follow...

Page 5 - TO AVOID SERIOUS PERSONAL INJURY

SAFETY TIPS SHARP ROTATING BLADES TO AVOID SERIOUS PERSONAL INJURY · NEVER Touch This Machine without Training and Authorization by Your Supervisor. · ALWAYS Read Operation and Service Manual BEFORE Operating, Cleaning, or Servicing. · ALWAYS Keep Hands Clear of Blades and Moving Parts. · ONLY Use a...

Page 6 - Use Qualified Technician and Electrician for Installation.; Do not; KEEP HANDS CLEAR OF SHARP ROTATING BLADES.; machine should turn off.; Turn toggle switch to; “OFF”; or operation of the machine.

I. INSTALLATION TO AVOID SERIOUS PERSONAL INJURY, PROPERLY INSTALL EQUIPMENT IN ADEQUATE WORK AREA · ALWAYS Use Qualified Technician and Electrician for Installation. · ALWAYS Install Equipment in Work Area with Adequate Light and Space. · ONLY Operate on a Solid, Level, Non-Skid Surface. · NEVER By...

Page 7 - SHARP ROTATING BLADES; The dimensions of the feed slot in the Safety Cover are the; size of product which can be; down; Product will exit at machine output under Blade Assemblies.; DO NOT WEAR GLOVES WHILE OPERATING.; size of product; DO NOT WEAR GLOVES WHILE OPERATING.; COMB POSITIONS FOR

II. OPERATION SHARP ROTATING BLADES TO AVOID SERIOUS PERSONAL INJURY · ONLY Properly Trained Pesonnel Should Use This Equipment. · ALWAYS Keep Hands Clear of Blades and Other Moving Parts. · NEVER Operate With Safety Cover in Raised Position or Removed. Safety Cover MUST Be Down During Operation. · ...

Page 8 - Keep Hands Clear of Blades and Moving Parts.; Procedures; BEFORE; NEVER; If machine becomes jammed or clogged,turn ON/OFF toggle switch to; UNPLUG; B. TO UNJAM OR UNCLOG; Keep Hands Clear of Blades and Moving Parts.; Procedures; Attempting to Unjam or Unclog.; for Removal and Cleaning Purposes Only.; position and; UNPLUG; machine from power source and perform lockout/tagout procedures.

DO NOT WEAR GLOVES WHILE OPERATING. 3. Turn ON/OFF toggle switch to “ON” position. 4. Insert the product through the feed slot in Safety Cover. Observe the processing through the Safety Cover. 5. Product will exit at machine output under Blade Assemblies. NEVER REACH OR GRAB FOR PRODUCT AT MACHINE O...

Page 9 - Before; Cleaning or Servicing.; ONLY; Use Recommended Cleaning Equipment, Materials, and Procedures.; Thoroughly Clean Equipment at Least Daily.; A. CLEANING SAFETY COVER AND CASE; machine from power supply; B. CLEANING CRADLE AND BLADE ASSEMBLIES; Assembly with right hand and slide Cradle Assembly to right.

III. CLEANING SHARP ROTATING BLADES TO AVOID SERIOUS PERSONAL INJURY · ALWAYS Turn Off and Unplug Machine from Power Source and Perform Lockout/Tagout Procedures Before Cleaning or Servicing. · ALWAYS Wear Wire Mesh Safety Gloves When Touching or Handling Stew Cutter Attachments for Removal and Clea...

Page 10 - CLEANING TENDERIZER, SCORING, CUTLET AND STAR BLADE ASSEMBLIES

4. With the parts disassembled, they should be cleaned and sanitized as follows: 7 STEP 1 Rinse Cradle Assembly, wire combs, and Blade Assemblies in a water bath of 110°-115°F to loosen particles. STEP 2 Immerse all items in soapy bath of 120°-130°F and clean using the BIRO Cleaning Brush, Part #T30...

Page 11 - CLEANING STEW/STRIP CUTTER BLADE ASSEMBLIES

8 CLEANING STEW/STRIP CUTTER BLADE ASSEMBLIES ALWAYS WEAR WIRE MESH SAFETY GLOVES WHENTOUCHING OR HANDLING STEW/STRIP CUTTER BLADEASSEMBLIES.

Page 12 - CUTLET AND STAR CRADLE ASSEMBLIES; NOTE: BIRO RECOMMENDS THE USE OF WIRE SAFETY CLEANING; with bearing shoulder flat up

ASSEMBLY OF PRO-9 TENDERIZER, SCORING, CUTLET AND STAR CRADLE ASSEMBLIES NOTE: BIRO RECOMMENDS THE USE OF WIRE SAFETY CLEANING GLOVES WHEN HANDLING CRADLE ASSEMBLIES. STEP 1: Place the empty cradle on table top with plastic handle toward you, left hand cradle end away. 9 STEP 2: Holding drive coupli...

Page 13 - Place back wire comb T3117 in right hand with; between; the first two tender-; AND STAR CRADLE ASSEMBLIES WITH WIRE COMBS

ASSEMBLY OF PRO-9 TENDERIZER, SCORING, CUTLET AND STAR CRADLE ASSEMBLIES (Cont.) 10 STEP 6: Place back wire comb T3117 in right hand with the short horizontal end away from you. Place thecomb finger closest to you (comb finger closest toright hand cradle end) between the first two tender- izer blade...

Page 14 - ASSEMBLY OF PRO-9 STEW/STRIP CUTTING CRADLES; AND STAR CRADLE ASSEMBLIES WITH RIGID COMBS

ASSEMBLY OF PRO-9 STEW/STRIP CUTTING CRADLES 12 STEP 6: Place back comb T3117 in right hand with the short horizontal end away from you. Place the combfinger closest to you (comb finger closest to righthand cradle end) between the first two feeder blades on the back blade assembly.CAUTION: IF COMB F...

Page 15 - CUTTING CRADLES

ASSEMBLY OF PRO-9 STEW/STRIP CUTTING CRADLES NOTE: BIRO RECOMMENDS THE USE OF WIRE SAFETY CLEANING GLOVES WHEN HANDLING CRADLE ASSEMBLIES. STEP 1: Place the empty cradle on table top with plastic handle toward you, left hand cradle end away. 11 STEP 4: Holding the drive coupling end of the front bla...

Page 17 - Procedures Before Servicing.; Switches and Safety Interlock:; vi. Turn toggle switch to; position. Unplug machine from power source and perform

IV. MAINTENANCE SHARP ROTATING BLADES TO AVOID SERIOUS PERSONAL INJURY · ALWAYS Turn Off and Unplug Machine from Power Source and Perform Lockout/Tagout Procedures Before Servicing. · NEVER Touch This Machine Without Training and Authorization By Your Supervisor · ALWAYS Keep Hands Clear of Blades a...

Page 23 - WRAPAROUND CASE PARTS; CASE TOP PARTS; SAFETY COVER PARTS; Item Number; CASE TOP PARTS; SAFETY COVER PARTS; SAFETY COVER PARTS

19 WRAPAROUND CASE PARTS ItemNumber Description T3005 Case, SS LW10S Lock washer 1 4 T3059-5-3 Warning Label PHS023S Case Top Side Screw (10-24) T3069-1C Case Top Side Screw Clip T3248-1 Cradle Rest Bar T3248-4 Cradle Rest Thrust Plate HHS040S Cradle Rest Bar Screw, RH HHS046S Cradle Rest Bar Screw,...

Page 25 - TENDERIZER CRADLE PARTS; TA3185M-115-TK SOLID STATE RELAY KIT FOR TRANSPARENT COVER

TENDERIZER CRADLE PARTS 21 TA3185M-115-TK SOLID STATE RELAY KIT FOR TRANSPARENT COVER TA3185M-115-SK SOLID STATE RELAY KIT FOR STAINLESS STEEL SAFETY COVER Itemnumber Description TA3185M-K Harness with solid state switch and reed110V-220V TA3096M-0-1 SS safety cover w/magnet TA3096M-2 Transparent sa...

Page 28 - STEW CRADLE PARTS LISTING

24 NOTE: All No.’s ending in “A” have #T3031-4 Spacer omitted from their assemblies starting with SR #57696 HD on 1-6-89. STEW CRADLE PARTS LISTING T3031-1 Stew, front spacer for ¾" width T3031-2 Stew, front spacer for 1" width T3031-3 Stew, front spacer for 1 1 4 " width T3031-5 Aux spa...

Page 29 - SCORING CRADLE PARTS; SCORING BLADES

SCORING CRADLE PARTS 25 SCORING CRADLE PARTS w/BLADES & COMBS (See parts list for other items) SCORINGBLADES FT BK “A” – DIM TA3130-20 Scoring Cradle Complete 2" 2" 0" TA3130-21 Scoring Cradle Complete 2" 1 7 8 " 1 16 " TA3130-22 Scoring Cradle Complete 1 7 8 " 1 7 8 ...

Page 30 - CUTLET PARTS LIST

CUTLET PARTS LIST 26 ItemNumber Description TA3130-50 Cutlet cradle assembly complete TA3131-50 Cutlet front blade assembly – 42 blades TA3132-50 Cutlet back blade assembly – 43 blades T3031 Spacer 5 8 ID ´ 7 8 OD ´ .140 T3031-12 Front knife shaft cap spacer T3036-50 Cutlet knife blade – 26 teeth T3...

Page 31 - PARTS ORDERING; Important: Must have Serial Number when ordering parts.

PARTS ORDERING Important: Must have Serial Number when ordering parts. Please contact yoru nearest authorized Biro service agency for any repair parts required on your Biro – SirSteak Model Pro-9 Tenderizer. Additional information or authorized referral assistance may be obtained from: The Biro Manu...

Page 33 - ASSEMBLY NUMBERS FOR THE PRO-9 MACHINE; Bill of Material for Kit Numbers

ASSEMBLY NUMBERS FOR THE PRO-9 MACHINE 29 Item No. Description TA3006-2 Case top assembly without switches, #50420 on TA3006-2C CSA case top assembly w/o switches TA3020-6 Obs. driven timing pulley w/bushing, HD, NLA orderTA3020-8K TA3020-6K Obs. timing belt & pulley kit, HD only, NLA orderTA302...

Page 34 - READ AND UNDERSTAND THIS ENTIRE; SIGNATURE

OPERATOR’S SIGNATURE PAGE WARNING READ AND UNDERSTAND THIS ENTIRE MANUAL BEFORE SIGNING BELOW MY SIGNATURE ATTESTS THAT I HAVE COMPLETELY READ AND UNDERSTAND THIS MANUAL.I REALIZE THAT THIS MACHINE, IF OPERATED CARELESSLY, CAN CAUSE SERIOUS INJURY TOMYSELF AND OTHERS. NAME (PRINT) SIGNATURE DATE 30 ...

Page 35 - The following wearable parts are; not; covered by this; all; BIRO gives no warranties; THE BIRO MANUFACTURING COMPANY

LIMITED WARRANTY: WARRANTY: The Biro Manufacturing Company warrants that the Model Pro-9 will be free from defects in material and workmanship under normal use and with recommended service. BIRO willreplace defective parts, which are covered by this limited warranty, provided that the defectiveparts...

Manuals:

User Manual Acer T3103

Summary

Acer Manuals