Page 3 - iii; Information for your safety and; Turning the product off before cleaning
iii Information for your safety and comfort Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. Turning the product off before cleaning Unplug this product from the wall outlet before cleaning. Do not use liquid clea...
Page 4 - iv; Using electrical power
iv • To avoid damage of internal components and to prevent battery leakage, do not place the product on a vibrating surface. • Never use it under sporting, exercising, or any vibrating environment which will probably cause unexpected short current or damage rotor devices, lamp. Using electrical powe...
Page 7 - vii; Caution for Listening; Disposal instructions
vii Caution for Listening To protect your hearing, follow these instructions. • Increase the volume gradually until you can hear clearly and comfortably. • Do not increase the volume level after your ears have adjusted. • Do not listen to music at high volumes for extended periods. • Do not increase...
Page 8 - viii; First things first; Usage Notes; Precautions
viii First things first Usage Notes Do: • Turn off the product before cleaning. • Use a soft cloth moistened with mild detergent to clean the display housing. • Disconnect the power plug from AC outlet if the product is not being used for a long period of time. Don't: • Block the slots and openings ...
Page 9 - Contents
Information for your safety and comfort iii First things first viii Usage Notes viii Precautions viii Introduction 1 Product Features 1 Package Overview 2 Projector Overview 3 Projector Outlook 3 Control Panel 5 Remote Control Layout 6 MHL (Mobile High-Definition Link) Control 8 Getting Started 9 Co...
Page 11 - English; Introduction; Product Features
1 English Introduction Product Features This product is a single-chip DLP ® projector. Outstanding features include: • DLP ® technology • S1283Hne/T410DTB/XS-X30HGM/F1283Hne/S1283e/T410B/XS-X30M/DNX1322/F1283e/S1283/T410/XS-X30 series: True XGA 1024 x 768 resolutionS1383WHne/T420DTB/XS-W30HGM/F1383W...
Page 12 - Package Overview
2 En gl ish Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immediately if any thing is missing. Projector Power cord VGA cable 2 x Batteries (option) Security card User’s guide Quick start guide Carrying case (optio...
Page 13 - Projector Overview; Projector Outlook
3 English Projector Overview Projector Outlook Front / upper side # Description # Description 1 Power button 5 Remote control receiver 2 Control panel 6 Projection lens 3 Lamp cover 7 Tilt adjusting wheels 4 Focus ring 8 Lens cap 4 3 6 5 7 2 1 8
Page 15 - Control Panel
5 English Control Panel # Icon Function Description 1 POWER Power Indicator LED 2 LAMP Lamp Indicator LED 3 TEMP Temp Indicator LED 4 RESYNC Automatically synchronizes the projector to the input source. 5 SOURCE Changes the active source. 6 POWER See the contents in "Turning the Projector On/Off...
Page 16 - Remote Control Layout
6 En gl ish Remote Control Layout # Icon Function Description 1 Infrared transmitter Sends signals to the projector. 2 POWER Refer to the "Turning the Projector On/Off" section. 3 3D Press "3D" to select 3D models. 4 SOURCE Changes the active source. 5 MODE Press "MODE" to se...
Page 19 - Getting Started; Connecting the Projector
9 English Getting Started Connecting the Projector 1 D-Sub D-Sub 2 RS232 RS232 9 RS232 HDTV adapter 4 5 R B G RB G D-Sub D-Sub 2 USB USB 10 HDMI HDMI 11 HDMI 12 USB MHL 6 Y Y 7 R W 8 R W 8 R W 8 3 13 / MHL S-VIDEO MIC AUDIO IN AUDIO OUT VGA OUT VGA IN 2 VGA IN 1 USB CTRL RS232 VIDEO S-Video output V...
Page 21 - Turning the Projector On/Off; Turning on the Projector
11 English Turning the Projector On/Off Turning on the Projector 1 Ensure that the power cord and signal cable are securely connected. The Power indicator LED will flash red. 2 Turn on the projector by pressing "Power" button on the control panel or remote control, and the Power indicator LE...
Page 22 - Turning the projector off
12 En gl ish Turning the projector off 1 To turn the projector off, press and hold the power button. This message appears: "Please press the power button again to complete the shutdown process." Press the power button again. 2 The LED power indicator will turn RED and blink rapidly after the...
Page 23 - Adjusting the Projected Image; Adjusting the Height of Projected Image
13 English Adjusting the Projected Image Adjusting the Height of Projected Image The projector is equipped with elevator feet for adjusting the height of image. To raise/lower the image: Use Tilt adjusting wheel to fine-tune the display angle. Tilt adjusting wheel
Page 24 - How to optimize image size and distance
14 En gl ish How to optimize image size and distance Consult the table below to find the optimal image sizes achievable when the projector is positioned at a desired distance from the screen. • XGA series If the projector is 1.0 m from the screen, good image quality is possible for image sizes aroun...
Page 26 - User Controls; Installation menu
16 En gl ish User Controls Installation menu The installation menu provides an onscreen display (OSD) for projector installation and maintenance. Use the OSD only when the message "No signal input" is displayed on the screen. The menu options include settings and adjustments for screen size ...
Page 28 - Color
18 En gl ish Color Display Mode There are many factory presets optimized for various types of images. • Bright: For brightness optimization. • Presentation: For meeting presentation. • Standard: For common environment. • Video: For playing video in a bright environment. • Education: For education en...
Page 30 - Image
20 En gl ish Image Projection • Front-Desktop: The factory default setting. • Rear-Desktop: When you select this function, the projector reverses the image so you can project from behind a translucent screen. • Rear-Ceiling: When you select this function, the projector reverses and inverts the image...
Page 32 - Setting
22 En gl ish Setting SmartPen The Acer SmartPen can work in place of your regular computer mouse. Just hold the pen in your hand, and point it at the projected image to point, click, and drag. It gives you more flexibility to operate your computer without standing next to it.Pen Function To use the ...
Page 37 - Management
27 Eng lis h Management Note: "Constant Brightness" is available while both of "Dynamic Black" and "ECO Mode" are off. Note: You have to perform “Lamp Hour Reset” after replacing with new lamp; otherwise, "Constant Brightness" cannot be activated. Note: Functions vary...
Page 38 - Audio
28 En gl ish Audio Note: Functions vary depending on model definition. Volume • Press to decrease the volume. • Press to increase the volume. Microphone/Audio In Adjust the volume from "MIC" or "Audio In" connector. Mute • Choose "On" to mute the volume. • Choose "Off"...
Page 39 - Language
29 English 3D Note: It needs correct settings on graphic card 3D application program for correct 3D display. Note: The SW players, such as Stereoscopic Player and DDD TriDef Media Player can support 3D format files. You can download these three players on web page below, - Stereoscopic Player (Trial...
Page 40 - Acer LAN webpage management; How to login in
30 En gl ish Acer LAN webpage management How to login in Open browser and enter the Server IP address by 192.168.100.10 to find below homepage of acer LAN webpage management. A password is needed to login in before using. Select a user. Administrator is with high authority that can process more oper...
Page 41 - Home
31 English Home Home page shows connection status and you can find three main functions listed, Control Panel, Networking Setting and Alert Setting. Note: Control Panel and Networking Setting are only for Administrator account. Control Panel Enduser can control and adjust projector setting value via...
Page 42 - Network Setting; Alert Setting
32 En gl ish Network Setting Enduser can set IP address, group name and password as wish. After change network configurations or password, projector will reboot automatically after press "Apply". Note: Group Name and projector Name must be less then 32 characters. Alert Setting Enduser can s...
Page 43 - Logout
33 English Logout After tap Logout, you will return to login page within 5 seconds. Note: Functions vary depending on model definition.
Page 44 - Appendices; Troubleshooting; Image Problems and Solutions
34 En gl ish Appendices Troubleshooting If you experience a problem with your Acer projector, refer to the following troubleshooting guide. If the problem persists, please contact your local reseller or service center. Image Problems and Solutions # Problem Solution 1 No image appears onscreen • Con...
Page 48 - LED & Alarm Definition Listing; LED Messages
38 En gl ish LED & Alarm Definition Listing LED Messages Message Lamp_LED Temp_LED Power LED Red Red Red Blue Input power plug Flash ON to OFF 100ms Flash ON to OFF 100ms Flash ON to OFF 100ms -- Standby -- -- ON -- Power button ON -- -- -- ON Lamp retry -- -- -- Quick Flashing Power off (Coolin...
Page 49 - Cleaning and replacing the dust filters
39 English Cleaning and replacing the dust filters <<Type I>> Cleaning the dust filtersClean the dust filters after every 1000 hours of use. If they are note cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the ...
Page 51 - Replacing the Lamp
41 English Replacing the Lamp Use a screwdriver to remove the screw(s) from the cover, and then pull out the lamp.The projector will detect the lamp life. You will be shown a warning message "Lamp is approaching the end of its useful life in full power operation. Replacement suggested!" When...
Page 52 - Ceiling Mount Installation
42 En gl ish Ceiling Mount Installation If you wish to install the projector using a ceiling mount, please refer to the steps below: 1 Drill four holes into a solid, structurally sound part of the ceiling, and secure the mount base. Note: Screws are not included. Please obtain the appropriate screws...
Page 55 - Specifications
45 English Specifications The specifications listed below are subject to change without notice. For final specs, please refer to Acer's published marketing specifications. Projection system DLP ® Resolution • S1283Hne/T410DTB/XS-X30HGM/F1283Hne/S1283e/T410B/ XS-X30M/DNX1322/S1283/T410/XS-X30 series:...
Page 58 - Compatibility modes; VGA Analog - PC Signal
48 En gl ish Compatibility modes A. VGA Analog 1 VGA Analog - PC Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] VGA 640x480 60 31.5 640x480 72 37.9 640x480 75 37.5 640x480 85 43.3 640x480 120 61.9 SVGA 800x600 56 35.2 800x600 60 37.9 800x600 72 48.1 800x600 75 46.9 800x600 85 53.7 800x60...
Page 59 - VGA Analog - Extended Wide timing
49 English 2 VGA Analog - Extended Wide timing 3 VGA Analog -Component Signal B. HDMI Digital (*) 1 HDMI - PC Signal Modes Resolution V.Frequency [Hz] H.Frequency [KHz] WXGA 1280x768 60 47.8 1280x768 75 60.3 1280x768 85 68.6 1280x720 60 45.0 1280x720 120 92.9 1280x800 60 49.7 *1280x800 120 101.6 144...
Page 60 - HDMI - Extended Wide timing
50 En gl ish 2 HDMI - Extended Wide timing 640x480 85 43.3 640x480 120 61.9 SVGA 800x600 56 35.2 800x600 60 37.9 800x600 72 48.1 800x600 75 46.9 800x600 85 53.7 800x600 120 (RB) 76.3 XGA 1024x768 60 48.4 1024x768 70 56.5 1024x768 75 60.0 1024x768 85 68.7 1024x768 120 (RB) 97.6 SXGA 1152x864 70 63.8 ...
Page 63 - Regulations and safety notices
53 En gli sh English Regulations and safety notices FCC notice This device has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential i...
Page 64 - Remarque à l'intention des utilisateurs canadiens
54 En gl ish Remarque à l'intention des utilisateurs canadiens Cet appareil numérique de la classe B est conforme a la norme NMB-003 du Canada. Declaration of Conformity for EU countries Acer hereby declares that this projector series is in compliance with the essential requirements and other releva...
Page 65 - Declaration of Conformity
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, TaiwanContact Person: Mr. RU Jan, e-mail: [email protected] And, Acer Italy s.r.l Via Lepetit, 40, 20020 Laina...
Page 66 - Federal Communications Commission
Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 U. S. A. Tel: 254-298-4000 Fax: 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to thefollowing two condition...
