Page 2 - © 2010, Seagate Technology LLC All rights reserved.
© 2010, Seagate Technology LLC All rights reserved. Publication number: 100562041 , Rev. C November 2010 Seagate, Seagate Technology and the Wave logo are registered trademarks of Seagate Technology LLC in the United States and/or other countries. Momentus and SeaTools are either trademarks or regis...
Page 3 - Contents
Momentus 5400 FDE.4 SATA Product Manual, Rev. C i Contents 1.0 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.1 System requirements. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 4 - ii
ii Momentus 5400 FDE.4 SATA Product Manual, Rev. C 4.2 Serial ATA device plug connector pin definitions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 254.2.1 ATA Security policy exceptions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26 4.2.2 DriveTrust...
Page 5 - iii; List of Figures
Momentus 5400 FDE.4 SATA Product Manual, Rev. C iii List of Figures Figure 1. Typical +5V only startup and operation current profile . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Figure 2. Serial ATA connectors . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ...
Page 7 - Introduction; Momentus; System requirements
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 1 1.0 Introduction This manual describes the functional, mechanical and interface specifications for the following Seagate Momentus ® 5400 FDE.4 SATA model drives: These drives provide the following key features:• DriveTrust technology including: • Har...
Page 8 - About Momentus 5400 FDE.4 SATA disk drives; The; FDE drive feature list; accessible by the new drive owner); Security feature matrix
2 Momentus 5400 FDE.4 SATA Product Manual, Rev. C 1.2 About Momentus 5400 FDE.4 SATA disk drives The Momentus 5400 FDE.4 SATA drives contain DriveTrust technology providing Full Disk Encryption (FDE) using proven Advanced Encryption Standard (AES) data encryption and decryption . You can elect to us...
Page 9 - Drive state upon shipment
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 3 Having the encryption/decryption on the drive also provides the highest level of security for data because all data, including the boot sector bytes, operating system, temp and even the swap files are encrypted at the drive level. 1.2.1 Drive state u...
Page 10 - Specification summary table; Drive specifications
4 Momentus 5400 FDE.4 SATA Product Manual, Rev. C 2.0 Drive specifications Unless otherwise noted, all specifications are measured under ambient conditions, at 25°C, and nominal power. 2.1 Specification summary table The specifications listed in this table are for quick reference. For details on spe...
Page 12 - Formatted capacity; Model; Default logical geometry; Cylinders; LBA mode
6 Momentus 5400 FDE.4 SATA Product Manual, Rev. C * One Gbyte equals one billion bytes when referring to hard drive capacity. Accessible capacity may vary depending on operating environment and formatting. **During periods of drive idle, some offline activity may occur according to the S.M.A.R.T. sp...
Page 13 - Physical organization; Drive model; Recording and interface technology
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 7 2.4 Physical organization Drive model Read/write heads Number of disks ST9500327AS 4 2 ST9320327AS 3 2 ST9250317AS 2 1 ST9160317AS 2 1 ST9120317AS 1 1 ST980314AS 1 1 2.5 Recording and interface technology Interface Serial ATA (SATA) Recording method ...
Page 14 - Seek time; Read; Average latency; Time to ready
8 Momentus 5400 FDE.4 SATA Product Manual, Rev. C 2.7 Seek time Seek measurements are taken with nominal power at 25°C ambient temperature. All times are measured using drive diagnostics. The specifications in the table below are defined as follows:• Track-to-track seek time is an average of all pos...
Page 15 - Power specifications; Power dissipation; Seek
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 9 2.9 Power specifications The drive receives DC power (+5V) through a native SATA power connector. 2.9.1 Power consumption Power requirements for the drives are listed in table 3. Typical power measurements are based on an average of drives tested, un...
Page 16 - Typical current profile; Figure 1. Typical +5V only startup and operation current profile; Deferred spinup
10 Momentus 5400 FDE.4 SATA Product Manual, Rev. C 2.9.1.1 Typical current profile Figure 1. Typical +5V only startup and operation current profile 2.9.2 Deferred spinup Momentus 5400 FDE.4 SATA drives do not support the deferred spinup option. If you require this option, refer to the Momentus 5400....
Page 18 - Environmental specifications
12 Momentus 5400 FDE.4 SATA Product Manual, Rev. C 2.10 Environmental specifications 2.10.1 Ambient temperature Ambient temperature is defined as the temperature of the environment immediately surrounding the drive. Actual drive case temperature should not exceed 65°C (149°F) within the operating am...
Page 20 - Acoustics; Electromagnetic immunity; Performance seek
14 Momentus 5400 FDE.4 SATA Product Manual, Rev. C 2.11 Acoustics Drive emission of sound is measured consistent with the ECMA-74 and its’ referenced standards. Testing is conducted at room temperature (approximately 25 ° C). Emission levels are reported as the total A-weighted sound power levels fo...
Page 21 - Reliability; Measurement type; Nonrecoverable read errors; Agency certification; Safety certification
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 15 2.13 Reliability Measurement type Specification Nonrecoverable read errors 1 per 10 14 bits read, max. Annualized Failure Rate (AFR) <0.48% Load/Unload (U/UL) 25°C, 50% relative humidity 32°C, 80% relative humidity 5°C, 80% relative humidity 5°C,...
Page 22 - . This booklet is available from the Super-
16 Momentus 5400 FDE.4 SATA Product Manual, Rev. C Korean RRL If these drives have the Korea Communication Commission (KCC) logo, they comply with paragraph 1 of Arti-cle 11 of the Electromagnetic Compatibility control Regulation and meet the Electromagnetic Compatibility (EMC) Framework requirement...
Page 23 - Environmental protection; European Union Restriction of Hazardous Substances (RoHS); Corrosive environment; 表示该部件(于同类物品程度上)所含的危险和有毒物质低于中国
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 17 2.15 Environmental protection Seagate designs its products to meet environmental protection requirements worldwide, including regulations restricting certain chemical substances. 2.15.1 European Union Restriction of Hazardous Substances (RoHS) Seaga...
Page 24 - Configuring and mounting the drive; DriveTrust Security mode; Handling and static-discharge precautions
18 Momentus 5400 FDE.4 SATA Product Manual, Rev. C 3.0 Configuring and mounting the drive This section contains the specifications and instructions for configuring and mounting the drive. Momentus 5400 FDE.4 SATA drives may be connected to any computer system that supports a standard SATA interface....
Page 25 - Configuring the drive; Figure 2. Serial ATA connectors; Serial ATA cables and connectors; Figure 3. Attaching SATA cabling
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 19 3.2 Configuring the drive Each drive on the Serial ATA interface connects in a point-to-point configuration with the Serial ATA host adapter. There is no master/slave relationship because each drive is considered a master in a point-to-point relatio...
Page 26 - Drive mounting; Top cover stiffness/deflection; Operating with no performance degradation, emitted noise,
20 Momentus 5400 FDE.4 SATA Product Manual, Rev. C 3.4 Drive mounting You can mount the drive using four screws in the side-mounting holes or four screws in the bottom-mounting holes. See Figure 4 for drive mounting dimensions. Follow these important mounting precautions when mount-ing the drive:• A...
Page 28 - Drive integration; Figure 5. Momentus 5400 FDE.4 SATA drive label example
22 Momentus 5400 FDE.4 SATA Product Manual, Rev. C 3.5 Drive integration Momentus 5400 FDE.4 SATA drives may be installed in the target computer system in exactly the same way as a non-FDE Momentus drive. . Figure 5. Momentus 5400 FDE.4 SATA drive label example To install the drive in the system:1. ...
Page 29 - The BIOS queries the user for the password.; Secure Erase procedure
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 23 3.5.1 Drive installation Upon receipt by the consumer, the drive’s user interface is identical to a Momentus 5400.5 drive. The normal ATA security commands are functioning and available for initialization of the password as follows: Per normal ATA S...
Page 30 - Drive State after Secure Erase; The ATA Master password is the same value as it was before the erase.
24 Momentus 5400 FDE.4 SATA Product Manual, Rev. C 3.6.2 Drive State after Secure Erase Upon completion of the erase sequence, the existing cryptographic key is erased, rendering all existing data unintelligible, and the drive has been returned to the manufactured state as follows:• The existing enc...
Page 31 - Serial ATA interface; Hot-Plug compatibility; Serial ATA connector pin definitions; Segment; Key and spacing separate signal and power segments
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 25 4.0 Serial ATA interface These drives use the industry-standard Serial ATA (SATA) interface that supports FIS data transfers. It sup-ports ATA programmed input/output (PIO) modes 0–4; multiword DMA modes 0–2, and Ultra DMA modes 0–6. The drive also ...
Page 32 - installed in a blind-mate backplane configuration.; ATA Security policy exceptions; next secure erase sequence.
26 Momentus 5400 FDE.4 SATA Product Manual, Rev. C Notes: 1. All pins are in a single row, with a 1.27 mm (0.050”) pitch.2. The comments on the mating sequence apply to the case of backplane blindmate connector only. In this case, the mating sequences are: • the ground pins P4 and P12.• the pre-char...
Page 33 - ATA Security Erase Unit bits; Word
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 27 the drive is returned to the default factory state. It is then immediately ready for disposal or repurpos-ing. The ATA Security Erase Unit Command provides for normal and enhanced erase modes as follows: Choosing enhanced erase mode will simply perf...
Page 34 - Ident Value
28 Momentus 5400 FDE.4 SATA Product Manual, Rev. C 4.2.2 DriveTrust Mode support Identify Page - Word 150 decimal (0x96h)- Bit 12 Identifies DriveTrust Support. Value = 1 = DriveTrust is supported Table 7: DriveTrust Identify Page Ident Value BIT set Bit Description 5 0 15 Vendor specific 1 14 Vendo...
Page 37 - Supported commands
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 31 2F READ LOG EXT Executable Executable Executable Executable Executable C4 READ MULTIPLE Aborted Executable Executable Aborted Executable 29 READ MULTIPLE EXT Aborted Executable Executable Aborted Executable F8 READ NATIVE MAX ADDRESS Executable Exec...
Page 39 - Identify Device command; The Identify Device command (command code EC
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 33 4.2.5 Identify Device command The Identify Device command (command code EC H ) transfers information about the drive to the host following power up. The data is organized as a single 512-byte block of data, whose contents are shown in the table belo...
Page 45 - Compatibility summary; Installation considerations; BIOS versions tested in ATA Security mode; Manufacturer
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 39 5.0 Compatibility summary 5.1 Installation considerations Many of today’s mobile computers have been designed to make it possible for the end user to replace the hard drive. Refer to your system’s user manual for the location of the hard drive compa...
Page 46 - Tested BIOS versions with Windows XP SP2
40 Momentus 5400 FDE.4 SATA Product Manual, Rev. C AMD K8 PHOENIX AWARD V5.1.39 AMD K8 PHOENIX AWARD V6.00PG AMD K8 PHOENIX AWARD AMD K8 PHOENIX DELL 1.1.2 AMD K8 PHOENIX VER 2004Q3 AMD K8 PHOENIX ATI 0X5A31 INSYDE R1.00 ATI RS400-200 AMI V02.59 ATI RS400-200 AMI V0707 ATI RS480 AMERICAN MEGETRENDS ...
Page 49 - DriveTrust compatibility
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 43 Table 13: DriveTrust compatibility Chipset Manufacturer Chipset Southbridge System Vendor System Model SATA Mode BIOS Intel ICH6M LG LW40-DOX1 ATA Phoenix OLMPSF07 TCL K40D ATA Phoenix1.00 ICH7M Acer Aspire 3690 BL50 ATA Phoenix V3.50 Aspire 5572WXM...
Page 52 - Supported operating systems; Microsoft
46 Momentus 5400 FDE.4 SATA Product Manual, Rev. C 5.3 Operating system versions tested This list indicates the types of Operating Systems Seagate tested during the compatibility testing process. Sev-eral variations of these operating systems have been tested. 5.4 Compatibility test configurations T...
Page 53 - Seagate Technology support services; SEAGATE ONLINE SUPPORT and SERVICES
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 47 6.0 Seagate Technology support services SEAGATE ONLINE SUPPORT and SERVICES For information regarding products and services, visit http://www.seagate.com/www/en-us/about/contact_us/ Available services include: Presales & Technical support Global...
Page 55 - Index
Momentus 5400 FDE.4 SATA Product Manual, Rev. C 49 Index A ACA 16 acoustics 5 , 14 Active mode 11 AFR 15 Agency certification 15 Altitude 12 Altitude, nonoperating 5 Altitude, operating 5 Ambient temperature 5 , 12 ambient temperature 8 Annualized Failure Rate 15 Annualized Failure Rate (AFR) 5 Area...
Page 60 - Seagate Technology LLC
Seagate Technology LLC 920 Disc Drive, Scotts Valley, California 95066-4544, USA Publication Number: 100562041, Rev. C
