Acer PDP 7859- Manuals

English 4 Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. But IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this product, observe the fo...

English 5 „ When the product is used on a cart, care should be taken to avoid quick stops, excessive force, and uneven surfaces that may cause the product and cart to overturn, damaging equipment or causing possible injury to the operator. „ Slots and openings in the cabinet are provided for ventila...

English 6 „ The product should be placed more than one foot away from heat sources such as radiators, heat registers, stoves, and other products (including amplifiers) that produce heat. „ When connecting other products such as VCR’s, and personal computers, you should turn off the power of this pro...

English 7 5 screen sizes (video input mode) and 2 screen sizes (RGB input mode) This display offers a total of five different screen sizes in video input mode: W1, W2, W3, W4.and 4:3 mode; A normal mode is available, for display of normal-size (4:3 aspect ratio) images. Video input mode W1: Fill Scr...

English 9 Front 1. Power button [Power] Turns the power ON or OFF. Located at the bottom of the display. 2. Remote control signal receiver Receives signals from the remote control 3. Power Indicator Lamp This lamp shows whether the main power is ON or OFF, as follows: PART NAMES AND FUNCTIONS Lit (R...

English 10 Bottom 1. Audio input terminal--(1) Connect this terminal to the sound output terminal of your VCR, etc.And this terminal is used for both AV1 (Composite Video Input) and AV2 (S-Video Input). 2. Video input terminal (Composite video input terminal) Connect this terminal to the video outpu...

English 11 10. External speaker output terminal (EXT SP) Connect this terminal to the optionally available speaker. (10W+10W-8 Ω ) Remote Control 1. Power: Press this key to turn on 7859. Press again to go to “standby” mode. 2. Input: Press this key to choose input source between PC/TV/AV. [AV also ...

English 13 Putting Batteries In The Remote Control 1. To remove the cover, slide it outwards while pushing arrow bottom up. 2. Put two AAA batteries in the remote control. Make sure that the batteries are properly oriented. 3. Close the cover until it snaps into place. - -

English 15 Carefully check the terminals for position and type before making any connection.Loose connectors can result in image or color problems. Make sure that all connectors are securely inserted into their terminals. CONNECTING DISPLAY TO EXTERNAL EQUIPMENT TV TV TV TV LD PC(VCA,S-VGA, XGA) DVD...

English 16 Turning On/Off The Power BASIC OPERATIONS Turning On The Power Turning Off The Power Press the power bottom on the remote control Press when the power is ON Adjusting The Input Mode Press this key to choose input source between PC/TV/AV. [AV also has Composite-Video (AV1)/S-Video (AV2)/Co...

English 17 TV Mode Adjusting TV/CATV Mode Adjusting The Display Mode Press this key to choose the mode for TV and Cable TV system. Press this key to turn on the TV channel message shown on the screen. Press again to turn off. Scan Mode Adjusting CH+/- Press this key to auto scan all channels that TV...

English 19 PC Mode CH-RTN Function Press this key to jump between two channels. Left Mouse Function Direction Function Function as left mouse button of PC Press the direction you want. Function as rolling ball at a mouse. CHRTN INPUT POWER SCAN CH+/- MUTE MTS CH VOL DRAG AUTO CHRTN EXIT FREEZE ZOOM+...

English 20 Adjusting Function Mode Right Mouse Function Mouse Drag Function Function as right mouse button of PC This key simulates the mouse drag function as in PC system. Press this key to make mouse drag function (as if right mouse button is pressed continuously). Press again to back to normal si...

English 21 OSD Function Mode OSD Function: „ PC: „ TV: Adjusting The Auto Function Auto: Press this key to auto adjust phase, clock, H/V position in PC model or to auto detect video system in TV/AV mode. Display Image Audio Language Misc. Brightness H. Postion Volume English OSD H. Positon Contrast ...

English 24 6 Status (a) PC (b) TV (a) PC: When in PC mode (VGA input), the OSD will show H. V. Resolution and H.V. Sync. (b) TV: When in TV mode (TV or AV input), the OSD will show the TV system. OSD Function OSD Direction Key Press this key to pop up the OSD menu. ____ ```` a a a a b b b b (Left/ R...

English 25 Screen Function Mode OSD Exit Key Press this key to exit OSD menu directly. Zoom + Function Zoom – Function Press this key to enlarge the screen Press this key to minify the screen EXIT INPUT POWER SCAN CH+/- MUTE MTS CH VOL DRAG AUTO CHRTN EXIT FREEZE ZOOM+ ZOOM- OSD 100 RIGHT LEFT TV/CA...

English 26 Freeze Function Press this key to hold on the screen (the video source still runs). Press again to continue. FREEZE INPUT POWER SCAN CH+/- MUTE MTS CH VOL DRAG AUTO CHRTN EXIT FREEZE ZOOM+ ZOOM- OSD 100 RIGHT LEFT TV/CATV DISPLAY INPUT

English 27 * When installing an option, make sure that all installation requirements for that option-as given in the relevant instruction manual-are met. * Warning: To prevent injury, fire, and electric shock, arrange for options to be initially installed by your dealer. OPTIONS Stand unit Wall moun...

English 28 This display has been factory-set for 17 different signals as shown below. Factory-set signals (RGB mode) * “Out of range” appears if the display receives a signal whose characteristic does not fall within the display’s permissible range. * You can check input signals through “Status” on ...

English 29 * Specifications and external appearance may change due to improvement. „ PlasMaster is a worldwide trademark of Acer PDP and is a registered in Taiwan, U.S.A. and other countries or areas. „ „ „ „ Regulation---Acer PDP 7859 * UL, CSA (FCC Class A)* TUV* CE* CCIB* BCIQ* C-Tick* VCCI SPECI...

English 30 Precaution Be sure to remove the power plug from the receptacle before cleaning the display.And be sure not to clean the display using a cloth dampened with volatile solvents, such as benzene or thinner. Such solvents can harm the display’s cabinet, the filter at the screen front, and the...