Page 2 - Usage Notice; Precautions
2 English ... Usage Notice Precautions Follow all warnings, precautions and maintenance as recom-mended in this user’s guide to maximize the life of your unit. Warning- Do not look into the projector’s lens when the lamp ison. The bright light may hurt your eyes. Warning- To reduce the risk of fire ...
Page 4 - Product Features; This product is an XGA single chip 0.7” DLP; Outstanding features include:; Introduction
4 English ... Product Features This product is an XGA single chip 0.7” DLP TM projector. Outstanding features include: True XGA, 1024 x 768 addressable pixels Single chip DLP TM technology NTSC/NTSC4.43/PAL/SECAM and HDTV compatible(480i/p, 576i/p, 720p, 1080i) Full function remote control w...
Page 5 - Package Overview
5 ... English Power Cord 1.8m VGA Cable 1.8m Remote Control with Laser Pointer 2 x Battery Introduction Composite Video Cable 2 . 0 m Projector with lens cap Package Overview This projector comes with all the items shown below. Checkto make sure your unit is complete. Contact your dealerimmediately ...
Page 6 - Main Unit; Product Overview
6 English ... Main Unit Product Overview 1. Focus Ring 2. Zoom Ring 3. Zoom Lens 4. Elevator Button 5. Elevator Foot 6. Remote Control Receiver 7. Connection Ports 8. Power Socket 9. Control Panel Introduction 6 2 9 7 3 4 5 8 1 6 Downloaded From projector-manual.com Acer Manuals
Page 7 - Control Panel
7 ... English Control Panel 1. Lamp Indicator LED 2. Temp Indicator LED 3. Power/Standby and Indicator LED (Power LED) 4. Source 5. Re-Sync 6. Four Directional Select Keys 7. Menu /Enter Introduction 6 1 2 3 7 4 5 Downloaded From projector-manual.com Acer Manuals
Page 8 - Connection Ports
8 English ... Introduction Connection Ports 1. PC Analog Signal/HDTV/Component Video Input Connector 2. Monitor Loop-through Output Connector 3. USB Connector 4. RS232 Connector 5. S-Video Input Connector 6. Composite Video Input Connector 7. Audio Input Connector 8. Remote Control Receiver 9. Kensi...
Page 9 - Remote Control with Laser Pointer
9 ... English 1. Transmit Indicator Light 2. Power 3. Empowering Key 4. Menu 5. Four Directional Select Keys 6. Laser Button 7. Mute 8. Keystone + 9. Keystone - 10. Page Up11. Page Down Remote Control with Laser Pointer Introduction 12. Re-Sync13. Hide14. Source15. Freeze16. Laser Pointer 1 3 10 2 5...
Page 10 - Connecting the Projector; Installation
10 English ... 1 . ................................................................................................................ Power Cord2 . ................................................................................................................. VGA Cable3 . ..............................
Page 11 - Powering On the Projector; And the Power LED will turn green.; Powering On/Off the Projector
11 ... English Installation Power/Standby Powering On the Projector 1. Remove the lens cap. 2. Ensure that the power cord and signal cable are securelyconnected. The Power LED will flash green. 3. Turn on the lamp by pressing “Power/Standby” button onthe control panel. n And the Power LED will turn ...
Page 12 - Warning Indicator
12 English ... Installation Warning Indicator When the “LAMP” indicator lights solid red, the projector will automatically shut itself down. Please contact your local reseller or service center. When the “TEMP” indicator lights solid red for about 20 seconds, it indicates the projector has been ...
Page 13 - Adjusting the Projected Image; Adjusting the Projector Image Height
13 ... English Adjusting the Projected Image Adjusting the Projector Image Height Tilt Adjusting Wheel Elevator Foot 1 2 3 Elevator Button The projector is equipped with an elevator foot for adjustingthe image height. To raise the image: 1. Press the elevator button n . 2. Raise the image to the des...
Page 14 - Adjusting the Projector Zoom / Focus
14 English ... Max. 29.5"(75.0cm) 73.8"(187.5cm) 123.0"(312.5cm) 172.2"(437.5cm) 196.9"(500.0cm) 246.1"(625.0cm) Min. 24.6"(62.5cm) 61.5"(156.3cm) 102.5"(260.4cm) 143.5"(364.6cm) 164.0"(416.7cm) 205.1"(520.8cm) Max.(WxH) 23.60" x 17.70" (60.0 x...
Page 15 - User Controls; Remote Control; Control Panel & Remote Control; Using the Control Panel; Four Directional Select Keys
15 ... English User Controls Remote Control Control Panel Control Panel & Remote Control There are two ways for you to control the functions: RemoteControl and Control Panel. Using the Control Panel Power/Standby 4 Refer to the “Power On/Off the Projector” section on pages11-12. Source 4 Press “...
Page 17 - How to operate; On Screen Display Menus
17 ... English The Projector has multilingual On Screen Display menusthat allow you to make image adjustments and change avariety of settings. The projector will automatically detectthe source. How to operate 1. To open the OSD menu, press “Menu” on the Remote Control or press “Menu/Enter”on the Con...
Page 18 - Language
18 English ... Language(Computer / Video Mode) Language Choose the multilingual OSD menu . Use the or key to select your prefered language. Press “Menu” on the Remote Control or press “Menu/Enter”onthe Control Panel to finalize the selection. User Controls Downloaded From projector-manual.com Acer M...
Page 24 - Projection
24 English ... ECO Mode Choose “On” to dim the projector lamp which will lower powerconsumption, extend the lamp life and reduce noise. Choose ”Off”to return normal mode. Menu Location Choose the Menu location on the display screen. Projection 4 Front-Desktop The factory default setting. 4 Rear-Desk...
Page 25 - Lamp Reminding
25 ... English Management (Computer / VideoMode) Source Lock When source lock is turned off, the projector will search for othersignals if the current input signal is lost. When source lock isturned on, it will “Lock” the current source channel before youpress “Source” button on remote control for n...
Page 26 - Reset
26 English ... My Start-up Screen Acer My Start-up Screen is a PC utility for user tochange the default start-up screen of Acer projectorto their desired image. You can install My Start-upScreen from the bundled CD. Connect the projectorto your PC with the bundled USB cable then executeMy Start-up S...
Page 27 - Appendices; Troubleshooting
27 ... English Appendices Problem: No image appears on screen. 4 Ensure all the cables and power connections are correctly andsecurely connected as described in the “Installation” section. 4 Ensure the pins of connectors are not crooked or broken. 4 Check if the projection lamp has been securely ins...
Page 30 - Problem: Message Reminders
30 English ... Appendices Problem: Message Reminders 4 “Lamp is approaching the end of its useful life in full poweroperation. Replacement Suggested!” will be shown about 10seconds when lamp life is going to deplete. 4 “Projector Overheated. Lamp will automatically turn off soon.”will be shown when ...
Page 31 - Replacing the lamp; Lamp Changing Procedure:
31 ... English Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message “Lamp is approaching the end of its useful lifein full power operation. Replacement Suggested!” When you seethis message, changing the lamp as soon as possible. Make sure the projecto...
Page 32 - Specifications
32 English ... Specifications The specs specified below are subject to change without notice. Regarding the finalspecs, please refer to Acer accounced marketing specs. Appendices Light Valve - Single Chip DLP TM Technology by Texas Instruments Lamp - 200W User Replaceable Lamp Number of Pixels - 102...
Page 33 - Compatibility Modes
33 ... English VES A V GA 640 x 350 70 31.5 70 31.5 VES A V GA 640 x 350 85 37.9 85 37.9 VES A V GA 640 x 400 85 37.9 -- -- VES A V GA 640 x 480 60 31.5 60 31.5 VES A V GA 640 x 480 72 37.9 72 37.9 VES A V GA 640 x 480 75 37.5 75 37.5 VES A V GA 640 x 480 85 43.3 85 43.3 VES A V GA 720 x 400 70 31.5...
Page 34 - Ceiling Mount Installation; Maximum screw length: 10mm
34 English ... 72.31 104.31 236.81 50.15 50.15 82.15 55.00 110.00 60.00 123.00 49.83 Max./Min. 602.5/402.5 Please note that damage resulting fromincorrect installationwill invalidate thewarranty. Appendices Ceiling Mount Installation 1. To prevent damaging your projector, please use the ceiling mo...
