Page 2 - NOTES
2 Precautions z The monitor may be damaged if placed too near a source of heat. Be aware of the location of radiators, cookers, open fires etc. z Do not cover the slots and openings on the back or top of the cabinet as the monitor requires ventilation. The monitor should be located in a well-ventila...
Page 3 - Package contents; LCD Monitor; Installation instructions; Assembling the Monitor
3 Package contents LCD Monitor Power Cord VGA Cable Audio Cable User Manual (CD) Quick Start Guide Installation instructions Assembling the Monitor acer acer 1. Position the monitor on top of the stand. 2. Connect the stand into the neck of the monitor along the track.
Page 4 - Important; The viewing angle of the monitor ranges from
4 Detaching the Monitor If you need to repackage the monitor, please separate the monitor and base, and restore them to the carton. To detach the monitor: 1. Unplug the AC power cord to make sure the power is off. 2. Pull the 4 hooks on bottom side of the base and hold. 3. Separate the monitor and b...
Page 5 - Connecting the Devices; Caution; AUDIO IN; WARNING; The D-Sub 15 pin plug of the VGA cable is trapezoid in shape. Make sure; Switching the Power
5 Connecting the Devices Caution : Make sure that the computer and the monitor are both disconnected from the power supply. AC IN 2 1 3 VGA AC Audio 1 3 2 AUDIO IN D-SUB IN AC Audio VGA c Power Code Attach the monitor to the power cord which should then be inserted into a properly grounded electric ...
Page 6 - Adjusting display settings
6 Adjusting display settings External Controls 1 AUTO If OSD is active, press to exit a selection in OSD. If OSD is inactive, press and the monitor will automatically optimize the position, focus and clock of your display. 2 < MINUS If OSD is active, press to select or adjust OSD options. If OSD ...
Page 7 - OSD options; MENU; OSD Menu
7 OSD options Please refer to "External Controls" on Page 6. To adjust the OSD settings: 1. Press the MENU button to open the OSD menu. Press again to enter a selection of 10 functions on OSD. 2. Use the buttons marked < or >, to highlight a control, then adjust the control to the desi...
Page 9 - Troubleshooting; Problems; Check to see if the power switch is in the ON position.
9 Troubleshooting Problems Possible Solutions Power LED is not ON • Check to see if the power switch is in the ON position. • Ensure that the Power Cord is connected. No Picture • Check to see if the power switch is in the ON position. • Ensure that the Power Cord is connected. • Ensure the video ca...
Page 10 - General specifications; Item; LCD Panel
10 General specifications Item Specification LCD Panel Display 19-inch Flat panel active-matrix TFT LCD Max resolution SXGA 1280×1024 pixels Pixel Pitch 0.294 mm Color 16.2M Brightness 250 cd/m² (Typical) Contrast Ratio 500:1 (Typical) Response Time 12ms (Typical) View Angle of Horizontal 140° View ...
