Page 2 - English
English Copyright © 2016. Acer Incorporated. All Rights Reserved. Acer LCD Monitor User GuideOriginal Issue: 07/2016 Changes may be made periodically to the information in this publication without obligation to notify any person of such revisions or changes. Such changes will be incorporated in new ...
Page 3 - Special notes on LCD monitors; Cleaning your monitor; Information for your safety and; Safety instructions; Connecting/disconnecting the device
iii English Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate a problem. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the power switch and then turn it on again to make sure the flicker disappears. • Y...
Page 4 - Accessibility; Warnings; Using electrical power
iv English Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To pr...
Page 5 - Product servicing
v English people will walk on the cord. • If an extension cord is used with this product, make sure that the total ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the w...
Page 6 - Potentially explosive environments; Additional safety information
vi English Potentially explosive environments Switch off your device in any area with a potentially explosive atmosphere and obey all signs and instructions. Potentially explosive atmospheres include areas where you would normally be advised to turn off your vehicle engine. Sparks in such areas coul...
Page 7 - LCD pixel statement; Tips and information for comfortable use; Finding your comfort zone
vii English LCD pixel statement The LCD unit is produced with high-precision manufacturing techniques. Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. This product has been shipped enab...
Page 8 - Taking care of your vision
viii English Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrai...
Page 9 - Declaration of Conformity
Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi New Taipei City 221, Taiwan Declaration of Conformity We, Acer Incorporated 8F, 88, Sec. 1, Xintai 5th Rd., Xizhi, New Taipei City 221, Taiwan And, Acer Italy s.r.l. Tel: +39-02-939-921 ,Fax: +39-02 9399-2913 www.acer.it Product: LCD Monitor Tr...
Page 10 - Federal Communications Commission
x English Acer America Corporation 333 West San Carlos St., San Jose Suite 1500 CA 95110, U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following ...
Page 11 - Contents; Unpacking 1
Contents English x Unpacking 1 Attaching the base (for selected models) 2 Screen position adjustment 3 Connecting the adapter and AC Power cord 3 Power saving 3 Display Data Channel (DDC) 4 Connector pin assignment 4 15-pin color display signal cable 4 24-pin color display signal cable 4 19-pin colo...
Page 12 - Troubleshooting 15; VGA Mode
English Information Menu 14 Troubleshooting 15 VGA Mode 15 DVI/HDMI Mode (Optional) 16
Page 13 - Unpacking
1 English Unpacking Please check that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide Audio cable (Optional) D-sub cable HDMI cable (Optional) AC Power cord DVI cabl...
Page 15 - Screen position adjustment; Connecting the adapter and AC Power cord; Power saving
3 English Screen position adjustment To optimize the viewing position, you can adjust the monitor tilt, using both of your hands to hold the edges of the monitor. The monitor can be adjusted to 15 degrees up or 5 degrees down. Connecting the adapter and AC Power cord • Check first to make sure that ...
Page 16 - Connector pin assignment; 5-pin color display signal cable
4 English Display Data Channel (DDC) To make installation easier, so long as your system supports the DDC protocol, the monitor is able to plug-and-play. The DDC is a communication protocol through which the monitor automatically informs the host system about its capabilities; for example, supported...
Page 17 - 9-pin color display signal cable
5 English 19-pin color display signal cable PIN No. Description PIN No. Description 1 TMDS Data2+ 2 TMDS Data2 Shield 3 TMDS Data2- 4 TMDS Data1+ 5 TMDS Data1 Shield 6 TMDS Data1- 7 TMDS Data0+ 8 TMDS Data0 Shield 9 TMDS Data0- 10 TMDS Clock+ 11 TMDS Clock Shield 12 TMDS Clock- 13 CEC 14 Reserved (N...
Page 18 - Standard timing table
6 English Standard timing table No. Mode Resolution Refresh Rate 1 VGA 640x480 60 Hz 2 640x480 72 Hz 3 MAC 640x480 66.7 Hz 4 VESA 720x400 70 Hz 5 SVGA 800x600 56 Hz 6 800x600 60 Hz 7 800x600 72 Hz 8 XGA 1024x768 60 Hz 9 1024x768 70 Hz 10 VESA 1152x864 75 Hz 11 1280x960 60 Hz 12 SXGA 1280x1024 60 Hz ...
Page 19 - Installation; Steps
7 English Installation To install the monitor on your host system, please follow the steps below: Steps 2 Connect the adapter a Connect the AC cord to the adapter.b Connect one end of the adapter to the monitor and the other end to a properly grounded, AC outlet. 3 Turn on the monitor and computer T...
Page 20 - Users controls; Panel controls
8 English Users controls Panel controls No. Item Description 1 Power button/indicator Turn the monitor on/off. Blue indicates power on. Blinking blue indicates standby/power saving mode. 2 < / > button Press the < / > button to navigate to the desired function, and press the Menu button ...
Page 21 - Using the Shortcut Menu; Input Source Selection
9 English Using the Shortcut Menu Press any of the function buttons (Empowering Key, Auto button, Menu button ) to open the shortcut menu. The shortcut menu lets you quickly select the most commonly accessed settings. Icon Item Description Empowering Press the Empowering Key to open the Acer eColor ...
Page 22 - Acer eColor Management; Operation instructions; Features and benefits
10 English Acer eColor Management Operation instructions 1 Press the Empowering Key to open the Acer eColor Management OSD menu and access the scenario modes. mpowering Technology Movie Graphics Standard ECO User 2 Press the < / > button to select the desired mode. 3 Press the Auto button to c...
Page 23 - Using the OSD Menus; Picture Menu
11 English Using the OSD Menus Note: The following content is for general reference only. Actual product specifications may vary. Your LCD monitor is equipped with an on-screen display (OSD) menu for making various adjustments and settings. Press the Menu button to open the OSD menu. You can use the...
Page 24 - OSD Menu
12 English OSD Menu The OSD menu is used for adjusting the OSD menu location and the timeout setting. OSDOSD Timeout 10 1 Press the Menu button to bring up the OSD menu. 2 Press the < / > button to select OSD and press the Menu button to enter the OSD menu. 6 Brightness: Adjust the brightness ...
Page 25 - Setting Menu
13 English Setting Menu The Setting menu is used for adjusting the general settings for current input signal such as aspect ratio, OSD language, and etc. 1 Press the Menu button to bring up the OSD menu. 2 Press the < / > button to select Setting and press the Menu button to enter the Setting ...
Page 26 - Information Menu
14 English Information Menu The Information menu displays the basic information of the LCD monitor. Information S/N: ETRLA00803104000502400 H:68KHz V:60Hz HDMI Input 1 Press the Menu button to bring up the OSD menu. 2 To view the basic information of the LCD monitor, press the < / > button to ...
Page 27 - Troubleshooting
15 English Troubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem. VGA Mode Problem LED status Remedy No picture visible Blue Using the OSD menu, adjust brightness and contrast to maximum or reset to thei...
