Page 3 - iii; Information for your safety and; Safety instructions; Cleaning your monitor; Special notes on LCD monitors
iii Information for your safety and comfort Safety instructions Read these instructions carefully. Keep this document for future reference. Follow all warnings and instructions marked on the product. • Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off th...
Page 4 - iv; Accessibility; Warnings; Using electrical power
iv Accessibility Be sure that the power outlet you plug the power cord into is easily accessible and located as close to the equipment operator as possible. When you need to disconnect power from the equipment, be sure to unplug the power cord from the electrical outlet. Safe listening To protect yo...
Page 5 - Product servicing
v ampere rating of the equipment plugged into the extension cord does not exceed the extension cord ampere rating. Also, make sure that the total rating of all products plugged into the wall outlet does not exceed the fuse rating. • Do not overload a power outlet, strip or receptacle by plugging in ...
Page 6 - Potentially explosive environments; Additional safety information; Disposal instructions
vi Note: Adjust only those controls that are covered by the operating instructions, since improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to normal condition. Potentially explosive environments Switch o...
Page 7 - vii; LCD pixel statement; Tips and information for comfortable use
vii Nevertheless, some pixels may occasionally misfire or appear as black or red dots. This has no effect on the recorded image and does not constitute a malfunction. This product has been shipped enabled for power management: • Activate display’s Sleep mode within 15 minutes of user inactivity. • A...
Page 8 - viii; Developing good work habits
viii Taking care of your vision Long viewing hours, wearing incorrect glasses or contact lenses, glare, excessive room lighting, poorly focused screens, very small typefaces and low-contrast displays could stress your eyes. The following sections provide suggestions on how to reduce eyestrain.Eyes •...
Page 9 - TABLE OF CONTENTS
TABLE OF CONTENTS UNPACKING............................................................................................ 1ATTACHING / REMOVING THE BASE .................................................... 2SCREEN POSITION ADJUSTMENT .......................................................... 2CONNECTI...
Page 10 - UNPACKING; LCD Monitor
EN-1 UNPACKING Please check the following items are present when you unpack the box, and save the packing materials in case you will need to ship or transport the monitor in future. LCD Monitor Quick Start Guide Audio Cable (Optional) AC Power Cord AC Adapter DP Cable (Optional) DVI Ca...
Page 12 - Do not expose the monitor to rain, excessive moisture, or dust.; CLEANING YOUR MONITOR
EN-3 CONNECTING THE POWER CORD Check first to make sure that the power cord you use is the correct type required for your area. This monitor has a universal power supply that allows operation in either 100/120V AC or 220/240 V AC voltage area. No user-adjustment is required. Plug one end of th...
Page 13 - State LED
EN-4 POWER SAVING The monitor will be driven into “Power Saving” mode by the control signal from the display controller, as indicated by the amber-color power LED. The power saving states will be kept until a control signal has been detected or the keyboard or mouse is activated. The recovery time f...
Page 14 - CONNECTOR PIN ASSIGNMENT
EN-5 CONNECTOR PIN ASSIGNMENT 24-Pin Color Display Signal Cable* * only for certain models PIN Meaning PIN Meaning 1. TMDS Data2- 13. NC 2. TMDS Data2+ 14. +5V Power 3. TMDS Data 2/4 Shield 15. Logic Ground 4. NC 16. Hot Plug Detect 5. NC 17. TMDS Data0- 6. DDC Clock 18. TMDS Data0+ 7. DDC Data 19. ...
Page 17 - STANDARD TIMING TABLE
EN-8 STANDARD TIMING TABLE Mode Resolution 1 VGA 640 x 480 60 Hz 2 VGA 640 x 480 72 Hz 3 VGA 640 x 480 75 Hz 4 MAC 640 x 480 66.66 Hz 5 VESA 720 x 400 70 Hz 6 SVGA 800 x 600 56 Hz 7 SVGA 800 x 600 60 Hz 8 SVGA 800 x 600 72 Hz 9 SVGA 800 x 600 75 Hz 10 MAC 832 x 624 74.55 Hz 11 XGA 1024 x 768 60 Hz 1...
Page 19 - INSTALLATION; troubleshooting section to diagnose the problem.
EN-10 INSTALLATION To install the monitor to your host system, please follow the steps as given below: Steps1. 1-1 Connect Digital Cable (Only Dual-input model) a. Make sure both the monitor and computer are powered-OFF.b. Connect one end of the 24-pin DVI cable to the back of the monitor and connec...
Page 20 - Connecting the devices; Plug the MHL-certified cable into the display's HDMI; Using MHL
EN-11 MHL (Mobile High-Definition Link) (Only for MHL-input Models) Mobile High-Definition Link is a digital interface for transmitting video and audio from an external portable device. It is also capable of charging a portable device (5 V @ 500 mA). Connecting the devices Plug the MHL-certified cab...
Page 21 - USER CONTROLS; Base Controls
EN-12 USER CONTROLS Base Controls Icon Item Description Power button/ indicator To turn the monitor ON or OFF. Lights up to indicate the power is turned ON. OSD functions Press to view the OSD. Minus / plus If the OSD is active, press the Minus or Plus button to toggle between the OSD options. OD Pr...
Page 22 - Acer eColor Management; ” Key to open the Acer eColor Management OSD and access
EN-13 Acer eColor Management Operation instructions Step 1: Press “ ” Key to open the Acer eColor Management OSD and access the scenario modes Step 2: Press “ “ or “ ” to select the mode Features and Benefits Main Menu icon Sub Menu icon Sub Menu item Description N/A User mode User defined. Sett...
Page 23 - Adjusting the OSD settings; Adjusting Brightness; Open the; control and select the; OD; setting using the adjustment arrows.
EN-14 Adjusting the OSD settings The OSD can be used for adjusting the settings of your LCD Monitor.Press the MENU key to open the OSD. You can use the OSD to adjust the picture quality, OSD position and general settings. For advanced settings, please refer to following page: Adjusting Brightness Op...
Page 24 - Adjusting picture quality
EN-15 Adjusting picture quality 1. Press the MENU key to bring up the OSD. 2. Using the / keys, select Picture from the OSD. Then navigate to the picture element you wish to adjust. 3. Use the / keys to adjust the sliding scales. 4. The Picture menu can be used to adjust the Brightness, Cont...
Page 25 - Adjusting OSD settings; Press the MENU key to bring up the OSD.
EN-16 Adjusting OSD settings 1. Press the MENU key to bring up the OSD. 2. Using the directional keys, select OSD from the on screen display. Then navigate to the feature you wish to adjust.
Page 26 - Adjusting miscellaneous settings
EN-17 Adjusting miscellaneous settings 1. Press the MENU key to bring up the OSD. 2. Using the / keys, select Setting from the OSD, then navigate the setting you want to adjust. 3. The setting menu can be used to adjust the screen Menu Language and other important settings, including Input and O...
Page 27 - Product information
EN-18 Product information 1. Press the MENU key to bring up the OSD. 2. Using the / keys, select Information from the OSD. Then the basic information of LCD monitor will show up for current input.
Page 28 - TROUBLESHOOTING
EN-19 TROUBLESHOOTING Before sending your LCD monitor for servicing, please check the trouble-shooting list below to see if you can self-diagnose the problem. (DVI/HDMI/DP Mode) Problems Current Status Remedy No Picture LED ON Using OSD, adjust brightness and contrast to maximum or reset to their ...
Page 30 - Federal Communications Commission
EN-21 Acer America Corporation 333 West San Carlos St., Suite 1500 San Jose, CA 95110 U. S. A. Tel : 254-298-4000 Fax : 254-298-4147 www.acer.com Federal Communications Commission Declaration of Conformity This device complies with Part 15 of the FCC Rules. Operation is subject to the following two ...
Page 31 - minute of inactivity respectively.
EN-22 ENERGY STAR ® Acer’s ENERGY STAR qualified products save you money by reducing energy costs and helps protect the environment without sacrificing features or performance. Acer is proud to offer our customers products with the ENERGY STAR mark. What is ENERGY STAR? Products that are ENERGY STAR...
