Page 3 - Special notes on LCD monitors; Information for your safety and comfort; Safety instructions; Cleaning your monitor; Accessibility
Special notes on LCD monitors The following are normal with the LCD monitor and do not indicate a problem.• Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the power switch and then turn it on again to make sure the flicker disappears. • You may find s...
Page 4 - Using electrical power
Safe listening To protect your hearing, follow these instructions.• Gradually increase the volume until you can hear it clearly and comfortably and without distortion.• After setting the volume level, do not increase it after your ears have adjusted.• Limit the amount of time listening to music at h...
Page 5 - Product servicing; Additional safety information
v Note: The grounding pin also provides good protection from unexpected noise produced by other nearby electrical devices that may interfere with the performance of this product. • Use the product only with the supplied power supply cord set. If you need to replace the power cord set, make sure that...
Page 7 - Tips and information for comfortable use; Finding your comfort zone
vii Tips and information for comfortable use Computer users may complain of eyestrain and headaches after prolonged use. Users are also at risk of physical injury after long hours of working in front of a computer. Long work periods, bad posture, poor work habits, stress, inadequate working conditio...
Page 8 - Developing good work habits
• using a task light• changing the display's viewing angle• using a glare-reduction filter• using a display visor, such as a piece of cardboard extended from the display's top front edge • Avoid adjusting your display to an awkward viewing angle.• Avoid looking at bright light sources, such as open ...
Page 10 - Unpacking
1 Unpacking Please check that the following items are present when you unpack the box, and save the packing materials in case you need to ship or transport the monitor in the future. LCD monitor Quick start guide D-sub cable DVI cable (Option) AC power cord
Page 11 - Attaching/removing the base
2 Attaching/removing the base Installation: Place the stand onto the display by aligning the screw holes on them, and fix the stand onto the display by screwing the four screws clockwise. Remove: Reverse the steps to remove the base.
Page 13 - Connector pin assignment
Connector pin assignment 15-pin color display signal cable PIN No. Description PIN No. Description 1 Red 9 +5V 2 Green 10 Logic ground 3 Blue 11 Monitor ground 4 Monitor ground 12 DDC-serial data 5 DDC-return 13 H-sync 6 R-ground 14 V-sync 7 G-ground 15 DDC-serial clock 8 B-ground 4
Page 15 - Standard timing table
6 Standard timing table Mode Resolution 1 VGA 640×480 60 Hz 2 MAC 640×480 66.66 Hz 3 VESA 720×400 70 Hz 4 SVGA 800×600 56 Hz 5 SVGA 800×600 60 Hz 6 XGA 1024×768 60 Hz 7 XGA 1024×768 70 Hz 8 VESA 1152×864 75 Hz 9 SXGA 1280×1024 60 Hz 10 VESA 1280×720 60 Hz 11 WXGA 1280×800 60 Hz 12 WXGA+ 1440×900 60 ...
Page 16 - Installation; Steps
7 Installation To install the monitor on your host system, please follow the steps below: Steps 1. Connect the video cable a. Make sure both the monitor and computer are switched off.b. Connect the VGA video cable to the computer. c. Connect the digital cable (only for dual-input models). (1) Make s...
Page 17 - Using the Shortcut Menu; USER CONTROLS
8 Power Switch / Power LED: To turn the monitor ON or OFF. Lights up to indicate the power is turned ON. Using the Shortcut Menu Press the function button to open the shortcut menu. The shortcut menu lets youquickly select the most commonly accessed settings. empowering Press the Empowering Key to o...
Page 18 - How to adjust a setting; Acer eColor Management; Operation instructions; Features and Benefits
9 How to adjust a setting Acer eColor Management Operation instructions Acer eColor ManagementStep 1: Press “ “ Key to open the Acer eColor Management OSD andaccess the scenario modes Step 2: Press “ “ or “ ” to select the modeStep 3: Press “ AUTO “ Key to confirm the mode and exit the eColor menu. ...
Page 19 - Adjusting the OSD settings; Adjusting the picture quality
10 Adjusting the OSD settings Note: The following content is for general reference only. Actualproduct specifications may vary. The OSD can be used for adjusting the settings of your LCD Monitor.Press the MENU key to open the OSD. You can use the OSD to adjust thepicture quality, OSD setting and gen...
Page 20 - Adjusting the OSD setting
11 Adjusting the OSD setting 1 Press the MENU key to bring up the OSD.2 Using the directional keys, select OSD from the on screen display. Then navigate to the feature you wish to adjust.
Page 21 - Adjusting the setting
12 Adjusting the setting 1 Press the MENU key to bring up the OSD.2 Using the / keys, select Setting from the OSD. Then navigate tothe feature you wish to adjust. 3 The Setting menu can be used to adjust the screen Wide Mode and other important settings.
Page 22 - Product information
Product information 1 Press the MENU key to bring up the OSD.2 Using the / keys, select Information from the OSD. Then thebasic information of LCD monitor will show up for current input. 13
Page 23 - Troubleshooting; VGA mode
Troubleshooting Before sending your LCD monitor for servicing, please check the troubleshooting list below to see if you can self-diagnose the problem VGA mode Problem LED status Remedy No picture visible Blue Using the OSD, adjust brightness and contrast to maximum or reset to their default setting...
Page 24 - DVI mode
DVI mode Problem LED status Remedy No picture visible Blue Using the OSD, adjust brightness and contrast to maximum or reset to their default settings. Off Check the power switch. Check if the power cord is properly connected to the monitor. Orange Check if the video signal cable is properly connect...
